2023 Updates For the Latest 5V0-42.21 Free Exam Study Guide!
Best 5V0-42.21 Exam Preparation Material with New Dumps Questions
NEW QUESTION # 24
Which VMware SD-WAN component Is responsible for overlay route distribution?
- A. VMware SD-WAN Controller
- B. VMware SD-WAN Hub
- C. VMware SD-WAN Edge
- D. VMware SD-WAN Orchestrator
Answer: A
NEW QUESTION # 25
During a VMware SD-WAN design session for a core business application, a customer expressed the following requirements:
* Allow business abstraction so that similar policies can be applied across different hardware types.
* Eliminate the need for the operations team to know the type of physical connectivity or the WAN carrier.
* Maintain SLA for real-time application.
Which design should be taken in terms of Link Steering?
- A. Select WAN Link, and then define the DSCP tagging
- B. Select Transport Group, and then select Preferred option.
- C. Select Error Correct Before Steering with % definition
- D. Deselect Error Correct before Steering Defaults.
Answer: A
NEW QUESTION # 26
Refer to the exhibit.
Which VMware SD-WAN Edge High Availability deployment is being used"?
- A. VRRP HA
- B. Fault Domain HA
- C. Standard HA
- D. Enhanced HA
Answer: A
NEW QUESTION # 27
What Is a typical use case for the deployment of a VMware SU-WAN Partner Gateway?
- A. Provide connectivity between multiple enterprise customers over private circuits
- B. Provide mite transport m a service provider backbone tor interconnecting a global customer SD-WAN branches.
- C. Interconnect branches/remote sites of a single enterprise customer to the internet
- D. Get improved flow analytics for all traffic in the SD-WAN network
Answer: B
NEW QUESTION # 28
Refer to the exhibit.
Which VMware SD-WAN Edge High Availability deployment is being used"?
- A. VRRP HA
- B. Fault Domain HA
- C. Standard HA
- D. Enhanced HA
Answer: A
NEW QUESTION # 29
A service provider assigns two Partner Gateways to a VMware SD-WAN Edge.
Which description is correct about default route.
- A. The service provider administrator decides whether the Partner Gateway advertises a default route
0.0.0.0/0 or not, although it is advertised by default. - B. It default route 0 0 0.010 has been configured for both Gateways, internet traffic originated from the Edge can failover to the other Gateway in case of a Gateway failure.
- C. When handoff is turned off on a Partner Gateway, the Gateway does not advertise a default route 0.0
0.0/0 to the Edge. - D. A default route 0.0.0.0/0 can be configured as a static route and set to NAT only on the Gateway
Answer: D
NEW QUESTION # 30
Refer to the exhibit.
An MSP is designing a solution for a merger of Customer A and Customer B to Customer A's enterprise. Due to overlapping IP addresses and security requirements, the segments with the same names between Customer A and Customer A cannot be merged.
Based on the graphic and the requirements, how many new segments need to be configured in the VMware SD-WAN Orchestrator?
- A. 6 segments
- B. 4 segments
- C. 5 segments
- D. 2 segments
Answer: C
NEW QUESTION # 31
A customer is looking to have Quality of Service (QoS), resource allocations, link/path steering, and error correction applied automatically based on applications.
Which component of VMware SD-WAN helps the customer achieve this requirement?
- A. Overlay Flow Control
- B. Branch Site Topologies
- C. Business Policy Framework
- D. High Availability Configuration
Answer: C
NEW QUESTION # 32
A network architect is designing a VMware SD-WAN architect for customer using VMware hosted VCO and VCGs, white VCEs will be deployed at the customer's branches and data centers. The network architect would like to achieve control plane redundancy.
Which action, if any, should be taken to meet this goal?
- A. Multiple VCFs at data centers can becontoured to function as route reflectors to achieve control plane redundancy.
- B. VCGs automatically assigned to a VCF. do not participate in control plane At least two dedicated Controllers should be manually assigned for each VCGs to achieve control plane redundancy.
- C. VCGs automatically assigned to a VCE do not participate in control plane At least two dedicated Controllers should be manually assigned for the customer to achieve control plane redundancy
- D. Multiple VCGs are automatically assigned to every VCE and control plane on VCUs is always enabled, so control plane redundancy has been taken care of already
Answer: A
NEW QUESTION # 33
What are three key benefits of VMware SD-WAN? (Choose three )
- A. Layer 2 VPNs between sites
- B. Remove requirement of Edge devices
- C. Reduce the burden on MPLS
- D. Automated configuration of cloud resources
- E. Provision Edges in minutes
- F. Gain visibility across any link
Answer: B,C,D
NEW QUESTION # 34
What is considered a typical VMware SD-WAN use case?
- A. Provide high speed layer 2 data center interconnects.
- B. Provide a distributed (per device) commands line interface (CLI) based configurations to implement complex network designintegrationoptions.
- C. Provide cloud delivered central management Orchestrator toimplementcomplex design network integration options.
- D. Provide management, control plane, and data forwarding from a single system to reduce complexly for the network administrator.
Answer: D
NEW QUESTION # 35
A customer is using VMware SD-WAN and has branches in different continents where the Edges are assigned with local Gateways.
Which Gateway should be used so all the branches can build tunnels with one another?
- A. Super Gateway
- B. Regional Gateway
- C. Alternate Gateway
- D. Primary Gateway
Answer: D
NEW QUESTION # 36
A customer is migrating a branch site with a VMware SD-WAN Edge coexisting with the CE. The Edge will be connected to internet link directly while connecting to the CE via a Layer 3 LAN switch.
MPLS underlay is the preferred path for communication from this site to branch sites that have no VMware SD-WAN Edges. Communication from this site to branch sites that have VMware SD-WAN Edges should go through overlay.
- A. Use BGP as the routing protocol on the Edge and flag its HGP neighbor to PE as Uplink.
- B. Use BGP as the routine, protocol on the Edge and flag its BGP neighbor to GE as Uplink.
- C. Use BGP as the rout.ng protocol on UK Edge and flag its BGP neighbor to the Layer 3 LAN switch as Uplink.
- D. Use BGP as the routing protocol on the Edge and filter prefixes from CE using Uplink Community
Answer: A
NEW QUESTION # 37
Which port is used for communication between VMware SD-WAN Edge and Orchestrator if there are no tunnels established to the Gateways?
- A. UDF 2426
- B. TCP 443
- C. UDP 500
- D. TCP 80
Answer: D
NEW QUESTION # 38
Which form factor can a customer use to deploy VMware SD WAN Edge?
- A. Open Virtualization Appliance
- B. Hyper-V Virtual Machine
- C. Docker Container
- D. Oracle Virtual Box
Answer: A
NEW QUESTION # 39
A service provider needs to upgrade a gateway to a new software version.
Which step in needed to complete the upgrade process?
- A. From the Orchestrator, select the check-box next to the appropriate gateway, choose ''Assign Software image", and then select the version for the upgrade.
- B. Copy the new image to/var/lib/velocloud/software_update.tar, and then run the upgrade thescript from the console.
- C. Create a new disk partition to save the new software image to, modify the boot order via the Gateway BIOS to boot to the new partition, and then reboot the gateway.
- D. Re-assign the Gateway to a new gateway Pool with the appropriate software version, and then run 'sudo apt-get update'' from the Gateway console.
Answer: C
NEW QUESTION # 40
Which deployment model ensures that management and control plane is cloud-delivered while data continues to flow on-premises between VMware SD-WAN nodes that remain on-premises?
- A. On-premises SD-WAN Orchestrator/Controller
- B. Partially on-premises
- C. Hosted SD-WAN Orchestrator/Controller
- D. All on-premises
Answer: D
NEW QUESTION # 41
Refer to the exhibit.
An MSP is designing a solution for a merger of Customer A and Customer B to Customer A's enterprise. Due to overlapping IP addresses and security requirements, the segments with the same names between Customer A and Customer A cannot be merged.
Based on the graphic and the requirements, how many new segments need to be configured in the VMware SD-WAN Orchestrator?
- A. 6 segments
- B. 4 segments
- C. 5 segments
- D. 2 segments
Answer: C
NEW QUESTION # 42
......
VMware 5V0-42.21 certification exam is an excellent way for IT professionals to demonstrate their skills in designing and deploying VMware SD-WAN solutions. 5V0-42.21 exam covers a range of topics related to SD-WAN design and deployment, and is designed to test the candidate's ability to design and deploy SD-WAN solutions that meet the needs of their organization. VMware SD-WAN Design and Deploy Skills certification is recognized by IT professionals around the world and is an excellent way to demonstrate expertise in this rapidly growing area of technology.
Free 5V0-42.21 Exam Files Verified & Correct Answers Downloaded Instantly: https://www.braindumpspass.com/VMware/5V0-42.21-practice-exam-dumps.html
Fast Exam Updates 5V0-42.21 dumps with PDF Test Engine Practice: https://drive.google.com/open?id=1avsFrBQARzGyfTVPGKb_4G4IZ7ww0r6B
