Dumps Moneyack Guarantee - HPE2-T37 Dumps UpTo 50% Off
Updated Dec-2021 Pass HPE2-T37 Exam - Real Practice Test Questions
NEW QUESTION 14
Which components require an HPE OneView license for management?
- A. Brocade and Cisco SAN Manager
- B. HPE Primera and HPE 3PAR
- C. HPE Apollo XL 170r
- D. HPE Virtual Connect modules
Answer: D
NEW QUESTION 15
Which statement about a Logical Enclosure for HPE BladeSystem is Hue?
- A. A logical enclosure must be created only for monitored HPE BladeSystem C700O enclosures.
- B. A logical enclosure is created automatically, and it is always based on a single enclosure.
- C. A logical enclosure can have between 1 to 5 HPE BladeSystem c7000 enclosures.
- D. A logical enclosure can contain a mix of HPE BladeSystem c7000 and C3000 enclosures.
Answer: B
NEW QUESTION 16
Your customer asks you if it is possible to perform HPE Synergy initial setup remotely. How should you respond?
- A. HPE Synergy can be configured remotely through a secure connection to the FLM if this option was enabled In the factory.
- B. Remote HPE Synergy Installation can be done only if an additional set of the services was purchased together with hardware platform.
- C. HPE Synergy cannot be deployed remotely, as Initial setup must be performed using a local console connection.
- D. Remote HPE Synergy setup is possible if HPE Composer 2 is used and a DHCP server Is available in the management network.
Answer: A
NEW QUESTION 17
Your customer is considering HPE Synergy as a hardware platform for visualization workload. The customer environment is wry dynamic, and they often have to modify hypervisor networking.
Which resource provided by HPE should you discuss with this customer?
- A. HPE OneView for VMware vCenter Server will enable host profile functionality and simplify changes.
- B. HPE Image Streamer provides templates which can be updated to map the hypervisor requirements
- C. HPE OneView Global Dashboard allows server profile replication and change management.
- D. PowerShell Library for HPE OneView allows scripted environment modification.
Answer: B
NEW QUESTION 18
For HPE Primera, match each task with the management tool that can be used to perform it.
Answer:
Explanation:
NEW QUESTION 19
Which statement about a server profile for an Apollo system is true?
- A. Virtual WWNs and MAC addresses can be defined
- B. Fibre Channel connections can be defined
- C. UEFI optimized is the only available boot mode
- D. Enclosure Group Is automatically selected
Answer: A
NEW QUESTION 20
Refer to the exhibit.
After adding SAN Manager to HPE OneView. you noticed that all SANs are in the discovered state. How will this affect HPE OneView storage management capabilities?
- A. Auto-zoning functionality will not work until SANs are associated with networks.
- B. Volume provisioning will only work for arrays that ate accessible through these SANs.
- C. Volume presentation through server profile will work with the discovered state.
- D. Snapshot functionality will be limited only to the volumes not using these SANs.
Answer: C
NEW QUESTION 21
How can your customer implement HPE OneView so that it can be used to manage an HPE ProLiant server and HPE BladeSystem?
- A. As a physical appliance based on HPE ProLiant 360 Gen 10.
- B. As a virtual appliance running on the supported hypervisor.
- C. As an application running on the server with CentOS Linux system
- D. As an application running on the server with Windows system.
Answer: A
NEW QUESTION 22
You ate implementing an HPE Synergy solution with multiple frames in one management ring. Image Streamer is not a part of this solution. How can an IPv4 address pool defined by the administrator be used In HPE OneView?
- A. to provide static IP addresses for storage systems managed in HPE OneView
- B. to provide static IP addresses for an operating system running on a Compute Module
- C. to provide static IP addresses for Logical Interconnects and Logical Enclosures
- D. to provide static IP addresses to IL0 and interconnect modules if applicable
Answer: B
NEW QUESTION 23
What is required to add remote frame link topology to HPE OneView?
- A. The HPE OneView certificate from the primary site must be added to HPE OneView in the remote site.
- B. The IP address assigned to HPE Composer installed in a remote site must be registered in a primary site.
- C. Multi-site licenses must be added to HPE OneView and activate for all available HPE Synergy frames.
- D. Management ports of the remote frame link topology must be connected to the management LAN.
Answer: C
NEW QUESTION 24
Your customer built a sever profile for HPE Synergy Gen 10 server and configured boot mode to Legacy BIOS. Which feature Is not available for this Compute Module?
- A. Boot from SAN
- B. Workload profile
- C. Secure boot
- D. BIOS management
Answer: C
NEW QUESTION 25
Your customer wants to use HPE OneView for VMware vCenter Server to simplify management of their VMware cluster running on HPE Synergy. The customer is concerned with the cost of additional licenses.
How will you explain licensing rules for this product?
- A. As long as the server is managed using HPE OneView. the customer can use HPE OneView for VMware vCenter Server without additional licenses.
- B. As long as the customer has HPE OneVtew Global Dashboard deployed, HPE OneView for VMware vCenter Server does not require any additional licenses.
- C. If the number of the HPE Synergy Compute Modules installed in HPE Synergy frame is less than 10, no license is required to use HPE OneView tor VMware vCenter Server.
- D. One HPE OneView for VMware vCenter Server license is required per HPE Synergy frame if more than
10 Compute Modules are installed in the frame.
Answer: D
NEW QUESTION 26
Which parameters can be defined in a server profile template for HPE Synergy Compute Modules? (Select two.)
- A. partition layout for servers running Linux.
- B. IL0 IPv4 or IPv6 address.
- C. local storage and BIOS settings.
- D. NIC teaming setup at OS level.
- E. network and storage connectivity.
Answer: C,E
NEW QUESTION 27
Refer to the exhibit.
Your customer wants to define a Logical Interconnect Group (UG) and set the redundancy of the master modules to highly available, but this option is not available. What is a possible reason?
- A. A dedicated license must be added to HPE OneView to enable this feature.
- B. Firmware on the master modules is too low to support highly available setup.
- C. Some master modules only support a redundant setup.
- D. There are not sufficient frames for highly available setup.
Answer: C
NEW QUESTION 28
You want to update the firmware for only two HPE Synergy Virtual Connect SE 32Gb FC Modules of a large environment. From which level must this procedure be initiated?
- A. Logical Interconnect
- B. Server Profile
- C. Logical Enclosure
- D. Logical Interconnect Group
Answer: C
NEW QUESTION 29
You try to add an HPE Primera array to HPE OneView, but you get a connectivity error. However, you can connect to the array using SSMC. What should you verify before adding HPE Primera to HPE OneView?
- A. whether WSAPI service is enabled on HPE Primera array.
- B. whether there are at least two Fibre Channel networks defined in HPE OneView.
- C. whether the appropriate license for HPE Primera Is available in HPE OneView.
- D. whether array management using HPE OneView is enabled in SSMC.
Answer: A
NEW QUESTION 30
......
Download Free HP HPE2-T37 Real Exam Questions: https://www.braindumpspass.com/HP/HPE2-T37-practice-exam-dumps.html
Pass Your Exam With 100% Verified HPE2-T37 Exam Questions: https://drive.google.com/open?id=1Y3WAufEmnBZpEz8KpWQvlXlhFa20mGTG
