Latest [Dec 26, 2021] Network Appliance NS0-183 Exam Practice Test To Gain Brilliante Result
Take a Leap Forward in Your Career by Earning Network Appliance NS0-183
Network Appliance NS0-183 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
NetApp NS0-183 Exam Certification Details:
| Passing Score | 67% |
| Sample Questions | NetApp NS0-183 Sample Questions |
| Exam Price | $150 USD |
| Exam Name | Storage Installation Engineer ONTAP |
| Number of Questions | 60 |
| Exam Registration | PEARSON VUE |
| Exam Code | NS0-183 NCSIE |
| Duration | 90 minutes |
| Recommended Training | ONTAP Clustered Installation Workshop (ILT) ONTAP Cluster Administration (vILT/ILT) Universal FAS Installation (WBT) Introduction to NetApp Installation Standard (WBT) |
NEW QUESTION 69
Click the Exhibit button.
After you install a FAS2720 with ONTAP 9.5, you disconnect the management port of node A to demonstrate cluster management LIF failover to the custom. When you reconnect the management port and try to revert the interface, you receive the following message.
Info: LIF "cluster_mgmt" has been hosted on port "NetApp-Cluster-01:e0M", whosehealth status is degraded.
You issue the network port showcommand and see the output shown in the exhibit. When you try to access the cluster interface, you cannot ping or connect to the cluster through the network.
Which two troubleshooting steps must you perform to solve the issue? (Choose two.)
- A. Set the Ignore Health Status parameter to true.
- B. Reconnect the management cable to bring the port online.
- C. Set the Ignore Health Status parameter to false.
- D. Use the network port modify -up-admin command to administratively down and up the port.
Answer: B,D
NEW QUESTION 70
You are cabling two Cisco 3232C switches for the cluster interconnect of a 4-node AFF A800 cluster.
Which pair of ports are used to cable the Inter-Switch Link (ISL) between the switches?
- A. 1/31 and 1/32
- B. 1/21 to 1/24
- C. 0/1 and 0/2
- D. 0/13 to 0/16
Answer: A
NEW QUESTION 71
After you deploy a 4-node AFF A220, you want to upgrade the ONTAP version of the cluster.
In this scenario, before the upgrade, which advanced CLI command is used to locate epsilon?
- A. cluster ha show
- B. clustering ring show
- C. cluster image show
- D. cluster show
Answer: D
NEW QUESTION 72
A customer has an AFF A800 with 24 internal drives and is running out of storage capacity.
In this scenario, which action will solve this issue?
- A. Insert more internal NVMe SSD drives.
- B. Attach an additional DS460C shelf, filled with drives.
- C. Insert more internal SSD drives.
- D. Attach an additional DS212C shelf, filled with drives.
Answer: A
NEW QUESTION 73
You installed a new AFF A800 2-node ONTAP 9.5 cluster and are asked to run diagnostics to validate the hardware.
Which command is used from the loader prompt to enter diagnostics?
- A. savenv
- B. boot_diags
- C. printenv
- D. sldiag
Answer: B
NEW QUESTION 74
After performing a controller upgrade on an HA pair in an ONTAP 9.5 cluster, you want to decommission the old systems.
Which statement is correct in this scenario?
- A. Open a Priority 1 technical case with NetApp Global Support and specify "Decommission" in the title.
- B. Decommissioning is done automatically when the systems no longer send AutoSupport messages.
- C. Ask the customer to log in to http://mysupport.netapp.com and decommission the old systems.
- D. The systems do not need to be decommissioned because the serial numbers are overtaken by the new systems.
Answer: C
NEW QUESTION 75
Which keyboard combination enables you to access the Service Processor (SP) or the Board Management Control (BMC) from the system console CLI?
- A. Ctrl + D
- B. Ctrl + G
- C. Ctrl + C
- D. Ctrl + S
Answer: B
NEW QUESTION 76
You want to create a new intercluster LIF for cross-cluster replication and use the CLI. After you create the nac101_intercluster_lif_icl LIF, you are not able to see the LIF in the list of local intercluster LIFs.
Referring to the exhibit, what is the problem?
- A. The intercluster LIF has assigned an IP address that is not in the intercluster VLAN.
- B. The assigned port for the intercluster e1c LIF is in the down admin state.
- C. The LIF that was created has the wrong role type.
- D. The home node of the new intercluster LIF has reached the maximum of four intercluster LIFs.
Answer: C
NEW QUESTION 77
Which hot-swappable transceiver is required to obtain full performance from a Cisco Nexus 3232C cluster-interconnect switch?
- A. SFP
- B. SFP+
- C. QSFP+
- D. QSFP28
Answer: D
NEW QUESTION 78
You completed an ONTAP cluster deployment as a reseller engineer. During the knowledge transfer process to the customer, they ask for proof that the array has correct multi-path HA cabling deployed and that the array is error free.
Which documentation output would you present to the customer to satisfy this requirement?
- A. NetAppDocs output
- B. Config Advisor output
- C. Active IQ Unified Manager output
- D. Active IQ OneCollect output
Answer: B
Explanation:
Explanation/Reference: https://docs.netapp.com/platstor/topic/com.netapp.doc.hw-controller-add/GUID-64A51339-
1F03-451C-B062-9F97E772817E.html
NEW QUESTION 79
A 4-node cluster has connectivity for both block and file access. Nodes 1 and 3 are used for file access, and nodes 2 and 4 are used for block access. During routine maintenance, node 4 is switched off and the LIFs are migrated to other nodes. Upon investigation, you see that the LIFs that serve file traffic have moved to alternative ports.
However, LIFs that serve the block have not migrated. In this scenario, what is happening?
- A. The fiber switch is configured incorrectly.
- B. The failover group is configured incorrectly.
- C. The LIFs that serve the block protocol do not failover.
- D. There is a faulty SFP.
Answer: C
NEW QUESTION 80
You have installed and configured a new AFF C190 cluster with ONTAP 9.7. Your customer wants you to install the latest version of ONTAP.
In this scenario, what are two methods to update ONTAP? (Choose two.)
- A. Use ONTAP System Manager to upload and install the new software image.
- B. Use ONTAP System Manager to download and install the new software image.
- C. Use a USB drive with the new software image and let ONTAP automatically boot.
- D. Use the cluster image package get and cluster image update commands.
Answer: B,D
NEW QUESTION 81
You completed the installation of an AFF A700s with NetApp CN1610 switches. You used ports e0a and e0f with breakout cables to connect the controllers to the interconnect switches. After completing the cluster setup, ports e0e and e0i are not visible in OnCommand System Manager. In this scenario, what caused this problem?
- A. You must first enable the ports using the network port modifycommand.
- B. Breakout cables were used and the second port on the same ASIC became disabled.
- C. You are missing a license to enable those ports.
- D. This is a hardware error and you must open a case with NetApp Support.
Answer: A
NEW QUESTION 82
You have to disable a switch that is connected to a port on your FAS2750. You notice that the LIFs that are associated with this port are migrated to a port that is not expected.
In this scenario, what would cause this behavior?
- A. The broadcast domain is configured incorrectly.
- B. The network port is configured incorrectly.
- C. There are no online ports within the same failover group.
- D. The network failover port is not licensed.
Answer: A
NEW QUESTION 83
An ONTAP cluster is installed at a secure site. The array has no access to the Internet but is managed 24/7 by onsite engineers. The customer requires that when hardware failures occur, the failures are reported to the NetApp Support team as quickly as possible.
In this scenario, which two tasks should be performed during the project hand-off procedure to satisfy the customer's requirement? (Choose two.)
- A. Ensure that the onsite engineers receive EMS alerts when hardware issues occur.
- B. Educate the onsite engineer about how to manually log support calls.
- C. Ensure that Active IQ Config Advisor is installed.
- D. Educate the onsite engineers about invoking the AutoSupport tool from ONTAP System Manager.
Answer: A,D
NEW QUESTION 84
You are installing a pair of Cisco Nexus 3132Q-V cluster switches and receive several syntax errors when the reference configuration file (RCF) is applied.
In this scenario, what are two reasons for these errors? (Choose two.)
- A. Cables were not removed before applying the RCF.
- B. An RCF file for a different version has been loaded.
- C. The switch was not in maintenance mode.
- D. The RCF was already applied.
Answer: B,D
NEW QUESTION 85
You need to install a cluster with a FAS2720 HA pair and a FAS8300 HA pair.
Which NetApp tool will verify which cluster interconnect switches support this configuration?
- A. Interoperability Matrix Tool (IMT)
- B. Hardware Universe (HWU)
- C. mysupport.netapp.com site
- D. Active IQ Config Advisor
Answer: B
NEW QUESTION 86
Which tool allows you to create a new FlexGroup volume?
- A. Cluster Config Builder
- B. OnCommand Unified Manager
- C. NetAppDocs
- D. OnCommand System Manager
Answer: D
NEW QUESTION 87
A customer wants to expand a 10-node AFF A700s NAS cluster running with Cisco Nexus 3132Q-V cluster interconnect switches using new nodes.
In this scenario, what is the maximum number of nodes to be added into this cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 88
You want to verify that connections are cables correctly and that shelf IDs are unique within an HA pair.
Which tool would be used to accomplish these tasks?
- A. Cloud Insights
- B. System Diagnostics
- C. Active IQ Unified Manager
- D. Active IQ Config Advisor
Answer: B
NEW QUESTION 89
A customer has a current AFF ASA A700 cluster and they want to expand the cluster by adding a second AFF ASA A700 HA pair.
In this scenario, which step would be required to accomplish this task?
- A. The customer will need to create a separate cluster for the second AFF ASA A700 pair.
- B. Install a BES-53248 cluster switch and convert the AFF ASA A700 from a switchless to switch cluster.
- C. Enable ALUA between the two HA pairs to allow cluster backend traffic.
- D. Install a Brocade FC switch and create zoning between the original cluster and the new cluster.
Answer: B
NEW QUESTION 90
Click the Exhibit button.
Your ONTAP cluster shows the cluster network errors that are shown in the event log.
What is used by ONTAP software to log the errors that are shown in the exhibit?
- A. EMS
- B. AutoSupport
- C. SNMP
- D. BGP
Answer: A
NEW QUESTION 91
......
Authentic Best resources for NS0-183 Online Practice Exam: https://www.braindumpspass.com/NetworkAppliance/NS0-183-practice-exam-dumps.html
