[Dec 15, 2021] 300-730 Exam Dumps 100% Same Q&A In Your Real Exam
300-730 Test Engine Dumps Training With 100 Questions
Training Course for 300-730 Exam
If you are looking to sit for the Cisco 300-730 SVPN exam, you should seriously consider taking up the official training ‘Implementing Secure Solutions with VPN’. This course is the proper preparation solution and will guide you on how to pass the test on the first try. It will introduce you to configuration, implementation, monitoring, and supporting business VPN solutions.
The course comes with a combination of action-based labs, giving the candidates a chance to experience management, setting up, and troubleshooting traditional IPsec in your role as a VPN engineer. The sessions will also expose you to DMVPN, FlexVPN, as well as remote access VPN. With a solid knowledge of such concepts at hand, you will be able to create data that is secure and encrypted as well as work with remote accessibility and enhance privacy.
Exam Topics
The Cisco 300-730 test includes a variety of subject areas. The applicants should get familiar with them as early as possible. The following is the overview of the domains that are covered in this certification exam:
Site-to-Site VPN on Firewalls & Routers: The first section checks and evaluates the test takers’ knowledge of site-to-site VPN. They should show their competence in describing GETVPN, FlexVPN, and DMVPN in detail.
Remote Access Virtual Private Networks: The next part assesses the expertise of the professionals in performing certain tasks. They need to show their proficiency in applying AnyConnect IKEv2 VPNs on routers and ASA. Moreover, it is important to have the competence in applying Clientless SSLVPN and AnyConnect Secure Sockets Layer Virtual Private Network on ASA. In addition, the individuals need to be familiar with applying Flex Virtual Private Networks on routers.
Troubleshooting Utilizing CLI and ASDM: As for this module, the individuals need to have good skills in troubleshooting IPsec, FlexVPN, DMVPN, SSL VPN/Clientless SSLVPN, and AnyConnect IKEv2.
Architectures of Secure Communications: The last topic of the Cisco 300-730 exam measures the applicants’ expertise in describing the functional parts of FlexVPN, GETVPN, IPsec, and DMVPN for VPN solutions. At the same time, it is important to have the ability to explain the functional parts of Clientless SSL, IPsec, and FlexVPN for remote access VPN solutions. In addition, the students should be able to recognize VPN technology based on configuration output for site-to-site VPN solutions and for remote access VPN solutions. This subject area requires that you show your skills in describing Elliptic Curve Cryptography (ECC) algorithms and split tunneling requirements for remote access VPN solutions and creating VPN solutions.
NEW QUESTION 14
Which requirement is needed to use local authentication for Cisco AnyConnect Secure Mobility Clients that connect to a FlexVPN server?
- A. AnyConnect profile
- B. EAP query-identity
- C. EAP-AnyConnect
- D. use of certificates instead of username and password
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security/flexvpn/200555-FlexVPN-AnyConnect-IKEv2- Remote-Access.html
NEW QUESTION 15
What are two functions of ECDH and ECDSA? (Choose two.)
- A. nonrepudiation
- B. digital signature
- C. key exchange
- D. revocation
- E. encryption
Answer: B,C
NEW QUESTION 16
Which requirement is needed to use local authentication for Cisco AnyConnect Secure Mobility Clients that connect to a FlexVPN server?
- A. AnyConnect profile
- B. EAP query-identity
- C. EAP-AnyConnect
- D. use of certificates instead of username and password
Answer: A
Explanation:
Section: Remote access VPNs
Explanation
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security/flexvpn/200555-FlexVPN-AnyConnect-IKEv2- Remote-Access.html
NEW QUESTION 17
Refer to the exhibit.
The DMVPN tunnel is dropping randomly and no tunnel protection is configured. Which spoke configuration mitigates tunnel drops?
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: D
NEW QUESTION 18
Under which section must a bookmark or URL list be configured on a Cisco ASA to be available for clientless SSLVPN users?
- A. webvpn (global configuration)
- B. tunnel-group (general-attributes)
- C. webvpn (group-policy)
- D. tunnel-group (webvpn-attributes)
Answer: A
NEW QUESTION 19
Which parameter is initially used to elect the primary key server from a group of key servers?
- A. highest IP address
- B. code version
- C. highest-priority value
- D. lowest IP address
Answer: C
Explanation:
Section: Secure Communications Architectures
Explanation/Reference: https://www.cisco.com/c/en/us/products/collateral/security/group-encrypted-transport-vpn/ deployment_guide_c07_554713.html
NEW QUESTION 20 
Refer to the exhibit. Based on the debug output, which type of mismatch is preventing the VPN from coming up?
- A. interesting traffic
- B. lifetime
- C. preshared key
- D. PFS
Answer: B
Explanation:
Section: Troubleshooting using ASDM and CLI
Explanation:
If the responder's policy does not allow it to accept any part of the proposed Traffic Selectors, it responds with a TS_UNACCEPTABLE Notify message.
NEW QUESTION 21
Which IKE identity does an IOS/IOS-XE headend expect to receive if an IPsec Cisco AnyConnect client uses default settings?
- A. *$SecureMobilityClient$*
- B. *$DfltlkeldentityS*
- C. *$AnyConnectClient$*
- D. *$RemoteAccessVpnClient$*
Answer: C
Explanation:
Section: Remote access VPNs
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security/flexvpn/200555-FlexVPN-AnyConnect- IKEv2-Remote-Access.html
NEW QUESTION 22
Which two statements about the Cisco ASA Clientless SSL VPN solution are true? (Choose two.)
- A. A Cisco ASA can simultaneously allow Clientless SSL VPN sessions and AnyConnect client sessions.
- B. When a client connects to the Cisco ASA WebVPN portal and tries to access HTTP resources through the URL bar, the ASA uses its configured DNS servers to perform FQDN resolution.
- C. The rewriter enable command under the global webvpn configuration enables the rewriter functionality because that feature is disabled by default.
- D. When a client connects to the Cisco ASA WebVPN portal and tries to access HTTP resources through the URL bar, the client uses the local DNS to perform FQDN resolution.
- E. Clientless SSLVPN provides Layer 3 connectivity into the secured network.
Answer: A,B
NEW QUESTION 23 
Refer to the exhibit. Cisco AnyConnect must be set up on a router to allow users to access internal servers
192.168.0.10 and 192.168.0.11. All other traffic should go out of the client's local NIC. Which command accomplishes this configuration?
- A. svc split include 192.168.0.0 255.255.255.0
- B. svc split exclude acl CCNP
- C. svc split exclude 192.168.0.0 255.255.255.0
- D. svc split include acl CCNP
Answer: D
Explanation:
Section: Secure Communications Architectures
Explanation/Reference:
NEW QUESTION 24
Refer to the exhibit.
Which value must be configured in the User Group field when the Cisco AnyConnect Profile is created to connect to an ASA headend with IPsec as the primary protocol?
- A. group-policy
- B. group-alias
- C. address-pool
- D. tunnel-group
Answer: D
NEW QUESTION 25
What is a requirement for smart tunnels to function properly?
- A. Applications must be UDP.
- B. Java or ActiveX must be enabled on the client machine.
- C. Stateful failover must not be configured.
- D. The user on the client machine must have admin access.
Answer: B
Explanation:
Section: Secure Communications Architectures
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation- firewalls/111007-smart-tunnel-asa-00.html
NEW QUESTION 26
What is a requirement for smart tunnels to function properly?
- A. Applications must be UDP.
- B. Java or ActiveX must be enabled on the client machine.
- C. Stateful failover must not be configured.
- D. The user on the client machine must have admin access.
Answer: B
NEW QUESTION 27 
Refer to the exhibit. The IKEv2 site-to-site VPN tunnel between two routers is down. Based on the debug output, which type of mismatch is the problem?
- A. peer identity
- B. transform set
- C. preshared key
- D. ikev2 proposal
Answer: A
Explanation:
Section: Troubleshooting using ASDM and CLI
NEW QUESTION 28
An engineer notices that while an employee is connected remotely, all traffic is being routed to the corporate network. Which split-tunnel policy allows a remote client to use their local provider for Internet access when working from home?
- A. excludeall
- B. tunnelspecified
- C. tunnelall
- D. excludespecified
Answer: B
NEW QUESTION 29
Refer to the exhibit.
Which VPN technology is allowed for users connecting to the Employee tunnel group?
- A. crypto map
- B. IKEv2 AnyConnect
- C. clientless
- D. SSL AnyConnect
Answer: B
NEW QUESTION 30
Which two features are valid backup options for an IOS FlexVPN client? (Choose two.)
- A. reactivate primary peer
- B. DNS-based hub resolution
- C. HSRP stateless failover
- D. tunnel pivot
- E. need distractor
Answer: A,B
NEW QUESTION 31
Which command identifies a Cisco AnyConnect profile that was uploaded to the flash of an IOS router?
- A. webvpn import profile SSL_profile flash:simos-profile.xml
- B. crypto vpn anyconnect profile SSL_profile flash:simos-profile.xml
- C. anyconnect profile SSL_profile flash:simos-profile.xml
- D. svc import profile SSL_profile flash:simos-profile.xml
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security/anyconnect-secure-mobility-client/200533- AnyConnect-Configure-Basic-SSLVPN-for-I.html
NEW QUESTION 32
Refer to the exhibit.
An engineer is troubleshooting a new GRE over IPsec tunnel. The tunnel is established but the engineer cannot ping from spoke 1 to spoke 2. Which type of traffic is being blocked?
- A. ISAKMP packets from spoke1 to spoke2
- B. ESP packets from spoke2 to spoke1
- C. ISAKMP packets from spoke2 to spoke1
- D. ESP packets from spoke1 to spoke2
Answer: B
NEW QUESTION 33 
Refer to the exhibit. A site-to-site tunnel between two sites is not coming up. Based on the debugs, what is the cause of this issue?
- A. An authentication failure occurs on the remote peer.
- B. A certificate fragmentation issue occurs between both sides.
- C. An authentication failure occurs on the router.
- D. UDP 4500 traffic from the peer does not reach the router.
Answer: D
Explanation:
Section: Troubleshooting using ASDM and CLI
NEW QUESTION 34
A network engineer must design a remote access solution to allow contractors to access internal servers. These contractors do not have permissions to install applications on their computers. Which VPN solution should be used in this design?
- A. Clientless
- B. IKEv2 AnyConnect
- C. Port forwarding
- D. SSL AnyConnect
Answer: A
NEW QUESTION 35
......
300-730 Practice Test Pdf Exam Material: https://www.braindumpspass.com/Cisco/300-730-practice-exam-dumps.html
300-730 Questions Pass on Your First Attempt Dumps for CCNP Security Certified: https://drive.google.com/open?id=1HVl2HR-Wo0KhsrB13TOxJ8C6ecp2G8FQ
