A fully updated 2024 MS-721 Exam Dumps exam guide from training expert BraindumpsPass
Provides complete coverage of every objective on exam and exam preparation MS-721
Microsoft MS-721 exam is designed for IT professionals who want to demonstrate their expertise in designing, deploying, and managing collaboration and communication solutions using Microsoft technologies. MS-721 exam is still in beta, which means that it is in the testing phase and is not yet widely available. However, it is expected to be released soon, and IT professionals who pass the exam will earn a certification that demonstrates their skills and knowledge in this area.
Microsoft MS-721: Collaboration Communications Systems Engineer (beta) exam is a certification exam that is designed to test the knowledge and skills of individuals who are interested in becoming certified Collaboration Communications Systems Engineers. MS-721 exam is a beta exam, which means that it is still in the testing phase and is not yet widely available to the public.
NEW QUESTION # 94
You have a Microsoft Teams Phone deployment.
You are deploying Direct Routing.
All users have a SIP URI in the format of [email protected]. The Session Border Controller (SBC) is named sbc.voice.contoso.com.
When troubleshooting errors on the SBC, you receive the warning shown in the following exhibit.
What is a possible cause of the issue?
- A. Microsoft 365 Phone System licenses are not assigned to the users.
- B. Only TLS 1.0 is enabled on the SBC.
- C. The firewall blocks inbound traffic on port 443 to the SBC.
- D. The certificate does not match the FQDN on the SBC.
Answer: D
Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/troubleshoot/phone-system/direct-routing/sip-options-tls-certificate-issues
NEW QUESTION # 95
You have a Microsoft Teams Phone deployment that contains a user named User1.
A company policy states that all users must have voicemail configured so that callers can record a message or be transferred to reception.
You need to verify the voicemail configuration of User1 to ensure that it meets the requirements of the company policy.
How should you complete the command? To answer select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/powershell/module/teams/get-csusercallingsettings
NEW QUESTION # 96
You are optimizing a network to better support voice and collaboration workloads in Microsoft Teams.
When the users are at a specific corporate site, you need to prevent the users from adding video during calls.
Solution: You run New-CsTeamsNetworkRoamingPolicy and set the -AllowiPvideo parameter to $False.
Does this meet the goal?
- A. Yes
- B. No
Answer: B
NEW QUESTION # 97
You have a Teams Phone deployment.
You need to enable external users to configure their emergency address manually in the Teams client.
What should you do?
- A. Create a new emergency call routing policy that has dynamic emergency calling configured.
- B. Create a new emergency calling policy that has external location lookup mode enabled.
- C. From Networks & locations, add the external subnets of the users.
- D. Enable Location-Based Routing.
Answer: B
NEW QUESTION # 98
You have a Microsoft Teams Phone deployment.
You need to implement Local Media Optimization for Direct Routing users at a site.
Users at the site frequently perform the following actions:
Park calls.
Place calls on hold.
Transfer calls to other users.
Escalate calls to conference calls.
Which action will be affected by implementing Local Media Optimization?
- A. Transfer calls to other users.
- B. Park calls.
- C. Escalate calls to conference calls.
- D. Place calls on hold.
Answer: C
Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/direct-routing-media-optimization#known-issues
NEW QUESTION # 99
You need to meet the technical requirements for the returns department.
How should you complete the PowerShell script? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 100
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are optimizing a network to better support voice and collaboration workloads in Microsoft Teams.
When the users are at a specific corporate site, you need to prevent the users from adding video during calls.
Solution: You run New-CsTeamsMeetingPolicy and set the -AllowIPVideo parameter to $False.
Does this meet the goal?
- A. Yes
- B. No
Answer: B
Explanation:
Instead run New-CsTeamsNetworkRoamingPolicy and set the -AllowIPVideo parameter to $False.
Note: The CsTeamsMeetingPolicy cmdlets enable administrators to control the type of meetings that users can create or the features that they can access while in a meeting.
The -AllowIPVideo parameter determines whether video is enabled in a user's meetings or calls. Set this to TRUE to allow the user to share their video. Set this to FALSE to prohibit the user from sharing their video.
Reference:
https://docs.microsoft.com/en-us/powershell/module/skype/new-csteamsmeetingpolicy
NEW QUESTION # 101
You have a dial plan named DPI.
You need to assign DPI to a new Microsoft Teams user named User1. You must verify that the appropriate dial plan and the associated normalization rules are assigned to User1.
How should you complete the PowerShell script? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/create-and-manage-dial-plans
NEW QUESTION # 102
You have a Microsoft Teams Phone deployment.
Users currently provide a five-digit PIN number to dial in to a meeting.
You need to change the PIN length to require users to enter a seven-digit PIN number.
What should you configure from the Microsoft Teams admin center?
- A. customization policies
- B. audio conferencing
- C. meeting policies
- D. conference bridges
Answer: B
NEW QUESTION # 103
You have a Microsoft Teams Phone deployment.
When you attempt to deploy a Session Border Controller (SBC) named sfac1xontoso.com. you receive the following error message: "We cant use the "SBCl-Contoso.com" domain as it hasn't been set up in the organization. Try agaax. If you continue to have problems, contact Microsoft customer support." You need to add the SBC to the tenant.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
1 - From the Microsoft Teams admin center, add the SBC as sbc1.contoso.onmicrosoft.com.
2 - From the Microsoft 365 admin center, add a licensed user that has a UPN to contoso.com domain.
3 - From the Microsoft Teams admin center, add the SBC as sbc1.contoso.com.
NEW QUESTION # 104
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your company uses Microsoft Teams Calling Plans.
The company acquires a small development team. Currently, users on the team have their own direct inward dial (DID) numbers that have PSTN capabilities.
You migrate the users to Teams.
You need to ensure that the users have phone numbers.
Solution: From the Microsoft Teams admin center, you place a new order for service numbers.
Does this meet the goal?
- A. Yes
- B. No
Answer: B
Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/getting-service-phone-numbers
NEW QUESTION # 105
You need to connect the analog intercoms to Teams Phone.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Create a trusted application endpoint for Teams.
- B. Create a resource account for each intercom.
- C. Register the ATAs with a Teams-certified SBC.
- D. Enable Direct Routing to a Teams-certified SBC.
- E. Create a configuration profile for IP phones.
Answer: C,D
Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/direct-routing-analog-devices
NEW QUESTION # 106
You have a Microsoft Teams Phone deployment that uses auto attendants. Holiday call settings are configured as shown in the following table.
The Emergency settings are configured as shown in the Emergency exhibit. (Click the Emergency tab.)
The End of Year Holidays settings are configured as shown in the Holiday exhibit. (Click the Holiday tab.)
The Outage Notification settings are configured as shown in the Outage exhibit. (Click the Outage tab.)
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 107
You have a Teams Phone deployment that contains two sites named Sit1 and Site2. Each site has a Session Border Controller (SBC).
You have a user named User1.
User1 relocates from Site1 to Site2 and is assigned a new phone number.
You need to change a policy assigned to User1 to ensure that the SBC at Site2 is used when the user makes outbound calls.
What should you change?
- A. the caller ID policy
- B. the dial plan
- C. the voice routing policy
- D. the calling policy
Answer: C
NEW QUESTION # 108
You have a Teams Phone deployment that uses Direct Routing and a legacy PBX.
You need to leverage the a PBX during outbound calls from scheduled Teams meeting.
What should you create?
- A. a meeting broadcast policy
- B. an Audio Conferencing policy
- C. an Audio Conferencing routing policy
Answer: C
Explanation:
Enable the routing of Teams meeting dial-out calls through Direct Routing Teams meeting dial-out calls are initiated from within a meeting in your organization to PSTN numbers, including call-me-at calls and calls to bring new participants to a meeting.
To enable Teams meeting dial-out routing through Direct Routing to on-network users, you need to create and assign an Audio Conferencing routing policy called "OnlineAudioConferencingRoutingPolicy".
Note:
Direct Routing lets you connect a supported, customer-provided Session Border Controller (SBC) to Phone System. With this capability, you can configure on-premises Public Switched Telephone Network (PSTN) connectivity with Microsoft Teams client, as shown in the following diagram:
Reference:
https://learn.microsoft.com/en-us/microsoftteams/audio-conferencing-on-network
https://learn.microsoft.com/en-us/microsoftteams/direct-routing-plan
Topic 1, Contoso
To start the case study
To display the first question in this case study, dick the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment and problem statements- If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.
General Overview
The network contains an Active Directory forest named contoso.com that syncs to Microsoft 365 by using Azure AD Connect Domain controllers run Windows Server 2019.
Physical Locations
Contoso has offices in Toronto, New York, and London. Contoso has a manufacturing facility in Vancouver.
Contoso has a global sales team that works remotely without a physical corporate office.
Active Directory Environment
The network contains an Active Directory forest named contoso.com that syncs to Microsoft 365 by using Azure AD Connect. Domain controllers Windows Server 2019.
Microsoft Office 365
Contoso has a Microsoft 365 subscription. All users are assigned Microsoft 365 F3 licenses. Contoso uses Microsoft Exchange Online for email.
Network Infrastructure
All the offices connect to each other by using a private WAN. The Toronto office has a 1 -Gbps internet circuit and the London office has a 100-Mbps internet circuit. Internet access for all the offices is provided through the Toronto and London offices.
The remote sales team users connect to the network by using VPN connections. The remote users use various connection types, including wireless and mobile.
Skype for Business Server traffic for the remote users is routed through the VPN connections.
Telephony
Contoso uses a centralized Skype for Business Server 2015 deployment configured for disaster recovery between the Toronto and London datacenters.
Each frontend pool connects to the PSTN through a pair of managed Session Border Controllers (SBCs) that provide Enterprise Voice and dial-in conferencing.
Contoso has a Skype for Business Server Survivable Branch Appliance (SBA) and a local SBC that connect to a Primary Rate Interface (PRO in the Vancouver manufacturing facility.
Contoso has hybrid connectivity deployed between Skype for Business Server and Office 365.
All SBCs are Microsoft Teams-certified.
The returns department has an auto attendant that uses an ID of [email protected].
Planned Changes
Contoso plans to migrate all existing services from Skype for Business Server to Teams.
Direct Routing will be deployed for the existing SBCs.
Existing meeting rooms have Skype for Business Server video endpoints that are Skype for Business Server-certified. The endpoints are not Teams-certified.
You plan to use the video endpoints in Teams until the equipment is replaced with Microsoft Teams Rooms.
A limited pilot of the Teams migration and the Direct Routing deployment will occur in the Vancouver facility before deployment to the entire company.
Technical Requirements
Contoso identifies the following technical requirements:
* During the limited pilot, the media path must be optimized.
- Media flow/ for the remote sales team users must be optimized.
Contoso identifies the following technical requirements:
* During the limited pilot, the media path must be optimized.
* Media flow/ for the remote sales team users must be optimized.
* All sales team users require inbound toll free audio conferencing-
* Users in the Vancouver facility must be able to place emergency calls regardless of internet availability.
* When users in the returns department dial out, the outbound calls must display Contoso and the department's phone number.
* The video endpoints for the existing meeting rooms must be able to be used for both voice and video conferencing in Teams meetings. All sales team users require inbound toll free audio conferencing-
* Users in the Vancouver facility must be able to place emergency calls regardless of internet availability.
* When users in the returns department dial out, the outbound calls must display Contoso and the department's phone number.
* The video endpoints for the existing meeting rooms must be able to be used for both voice and video conferencing in Teams meetings.
NEW QUESTION # 109
You need to assign a license to users to meet the technical requirements.
How should you complete the PowerShell script? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.users.actions/set-mguserlicense?view=graph-powershell-beta
https://docs.microsoft.com/en-us/skypeforbusiness/skype-for-business-and-microsoft-teams-add-on-licensing/assign-skype-for-business-and-microsoft-teams-licenses
NEW QUESTION # 110
You are optimizing a network to better support voice and collaboration workloads in Microsoft Teams. When the users are at a specific corporate site, you need to prevent the users from adding video during calls. Solution: You run New-CsTeams-MeetingPolicy and set the -MediaBitRateKb parameter set to 1.
Does this meet the goal?
- A. Yes
- B. No
Answer: B
Explanation:
---------
NEW QUESTION # 111
You create a network region Region1 in Microsoft Teams.
You are adding a network site to Region1. The site has a 1.5-Mb connection.
You need to ensure that all users at the site have a good voice experience.
What should you do?
- A. Assign the Region1 users a meeting policy that has a media bit rate of 1,500 Kbps.
- B. Create and assign a Teams Network Roaming Policy that has IP video disabled.
- C. Run the Microsoft 365 network connectivity test tool.
- D. Tag all traffic with a DSCP value of 46.
Answer: A
Explanation:
Reference:
https://docs.microsoft.com/en-gb/powershell/module/skype/new-csteamsnetworkroamingpolicy?view=skype-ps
NEW QUESTION # 112
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are optimizing a network to better support voice and collaboration workloads in Microsoft Teams.
When the users are at a specific corporate site, you need to prevent the users from adding video during calls.
Solution: You run New-CsTeamsMeetingPolicy and set the -MediaBitRateKb parameter to 1.
Does this meet the goal?
- A. Yes
- B. No
Answer: B
Explanation:
Instead run New-CsTeamsNetworkRoamingPolicy and set the -AllowIPVideo parameter to $False.
Note: The New-CsTeamsNetworkRoamingPolicy cmdlet allows IT Admins to create policies for Network Roaming and Bandwidth Control experiences in Microsoft Teams.
The TeamsNetworkRoamingPolicy cmdlets enable administrators to provide specific settings from the TeamsMeetingPolicy to be rendered dynamically based upon the location of the Teams client. The TeamsNetworkRoamingPolicy cannot be granted to a user but instead can be assigned to a network site. The settings from the TeamsMeetingPolicy included are AllowIPVideo and MediaBitRateKb. When a Teams client is connected to a network site where a CsTeamRoamingPolicy is assigned, these two settings from the TeamsRoamingPolicy will be used instead of the settings from the TeamsMeetingPolicy.
Reference:
https://docs.microsoft.com/en-us/powershell/module/skype/new-csteamsnetworkroamingpolicy
NEW QUESTION # 113
You have a global Teams Phone deployment that has local service numbers from multiple offices You need to ensure that when the users at an office in Sydney create a Teams meeting invite, the invite displays a local conferencing number by default What should you do?
- A. Assign a local service number from the Sydney office to a resource account
- B. Create a new caller ID policy and assign a local service number from the Sydney office.
- C. Modify the global (org-wide default) Audio Conferencing policy and assign a local service number from the Sydney office.
- D. Create a new Audio Conferencing policy and assign a local service number from the Sydney office.
Answer: D
NEW QUESTION # 114
......
Tested Material Used To MS-721: https://www.braindumpspass.com/Microsoft/MS-721-practice-exam-dumps.html
Steps Necessary To Pass The MS-721 Exam: https://drive.google.com/open?id=1LQo-wnXri4U2Y5kFdCUkqJeHonYvv5z-
