Updated Aug-2026 Test Engine to Practice MB-820 Dumps & Practice Exam
Dumps Collection MB-820 Test Engine Dumps Training With 124 Questions
Microsoft MB-820 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 53
You need to determine If you have unwanted incoming web service calls in your tenant during the last seven days.
Which two KQL queries should you use? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
- A. Option A
- B. Option D
- C. Option E
- D. Option C
- E. Option B
Answer: A,E
NEW QUESTION # 54
You create an 'AddltemsToJson" procedure and publish it.
The procedure fails to run.
You need to fix the errors in the code.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Answer:
Explanation:
Explanation:
* In line 13, replace the Add method with Insert. = NO
* In line 15, replace the WriteTo method with ReadFrom. = NO
* Change the ItemObject variable type from JsonObject to JsonToken. = NO
* Move line 08 in the beginning of REPEAT .. UNTIL. = YES
The provided code is intended to serialize a list of items from the Item table into a JSON array format. Here is a breakdown of the code and the necessary corrections:
* In line 13, "ItemsArray.Add(ItemObject)": This line is correctly using the Add method to add the ItemObject to the ItemsArray. The Add method is the correct method to use for adding items to a JsonArray. Therefore, there is no need to replace Add with Insert.
* In line 15, "ItemsArray.WriteTo(RequestText)": The WriteTo method is used correctly to serialize the ItemsArray into a JSON formatted string and store it in the RequestText variable. The ReadFrom method is used for the opposite operation, i.e., to deserialize a JSON formatted string into a JsonArray, which is not the goal in this context. Hence, no change is needed here.
* Change the ItemObject variable type from JsonObject to JsonToken: The ItemObject variable is intended to hold JSON objects representing individual items, making JsonObject the appropriate type.
JsonToken is not a type used in this context within AL for Business Central, and thus the variable type should remain as JsonObject.
* Move line 08, "Clear(ItemObject)": This line should be moved inside the repeat loop to ensure that the ItemObject is cleared for each item in the loop. Placing it before the repeat would only clear it once before the loop starts, which could lead to incorrect serialization as the previous item's properties would not be cleared from the ItemObject.
The logic for serializing records into JSON is a common operation when interfacing with APIs or web services in Business Central, and the pattern shown in the code is typical for such operations.
NEW QUESTION # 55
A company uses Business Central. The company has branches in different cities.
A worker reports that each time they generate a daily summary report they get an error message that they do not have permissions.
You need to resolve the issue.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 56
You need to create the Install codeunit that is requited in the extension used for installing or updating the Housekeeping app.
Which data type or declaration should you use? To answer, select the appropriate options in the answer area.
NOTE; Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
For the Install codeunit required for the extension used for installing or updating the Housekeeping app, you should use the following data type and declaration:
* Data type for information: ModuleInfo
* Start of the declaration of the method or procedure to perform the tasks: local procedure In AL language, which is used for developing extensions in Business Central, an Install codeunit is a special type of codeunit that is used to handle installation or upgrade logic for an extension.
* ModuleInfo is a data type that contains information about the current extension, such as its version. It is typically used within the OnInstallAppPerCompany or OnUpgradePerCompany triggers of an Install codeunit to determine if the app is being installed for the first time or upgraded.
* A local procedure within an Install codeunit is a method that is only accessible within the codeunit itself. It is not visible to other objects or extensions. This is suitable for tasks that are internal to the installation process and should not be exposed globally.
These selections align with the requirements of handling installation and update procedures in a controlled and encapsulated manner within Business Central extensions.
NEW QUESTION # 57
A company has a Business Central online environment.
You are exporting a file from a client by using the DownloadFromStream method.
You need to create an InStream data type to send the data
Which solution should you use?
- A. Use OeatelnStream method for BLOB field of "TempBlob" table.
- B. Use CreatelnStream method for File type variable.
- C. Use OeatelnStream method from codeunit "Temp Blob".
Answer: C
NEW QUESTION # 58
Hotspot Question
You develop a test application.
You must meet the following requirements:
- Roll back changes to a test method after run time.
- Run an approve action on a test page named TestPageA.
You need to implement the given requirements on the test codeunit.
Which actions should you perform? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 59
You need to use a query data type to retrieve requited data.
How should you complete the code' To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
You are retrieving data using a query data type. The following code snippet needs to be completed:
* If QueryA...: The correct option here is Open. This opens the query and prepares it for data retrieval.
* While QueryA...: The correct option here is Read. This reads through the query results one row at a time.
* If QueryA...: Open
* While QueryA...: Read
NEW QUESTION # 60
A company uses Business Central.
The company plans to use a translation file in an extension. The extension has a caption that should not be translated.
You need to prevent the caption from being translated.
What should you do?
- A. Set the GenerateLockedTranslations feature in the appjson file.
- B. Add the Locked = true parameter to the Caption.
- C. Delete the Caption property.
- D. Copy the same caption for each language in the translation file.
- E. Use the CaptionML property and copy the same caption for each language used.
Answer: B
Explanation:
To prevent a caption from being translated in an extension for Microsoft Dynamics 365 Business Central, you should add the Locked = true parameter to the Caption (C). This parameter explicitly marks the caption as locked for translation, ensuring that it remains unchanged across different language versions of the extension.
This approach is useful for specific terms, brand names, or other elements within the application that should remain consistent regardless of the user's language settings. Unlike the other options, which involve manual manipulation of the translation file or properties, setting Locked = true directly in the AL code provides a clear, maintainable, and error-proof method to exclude specific captions from the translation process.
Topic 1, Case Study Alpine Ski House
Alpine Ski House is a company that owns and operates hotels, restaurants, and stores. Currently, the company uses the following software and interlace:
* Property management software (PMS) to manage hotel rooms
* On-premises accounting software to generate sales invoices and create purchase orders
* An API that allows restaurants and stores to obtain necessary information Restaurants and stores use standalone software for point of sale (POS) devices. Each day, the POS terminals generate a text file of sales data and save the files in a serval folder. An account assistant must manually import the files to the current software tables to be processed by the system.
The general manager receives several reports monthly from department managers. The reports take too much time to prepare.
The company is moving from a different system to Business Central online to manage the whole company.
The company plans to increase efficiency in every department by using APIs to obtain or share information between the different systems.
Each department involved in purchasing must be able to make purchase requests automatically and easily.
The departments do not need access to the full ERP management system.
Alpine Ski House requires the development of several extensions for the planned improvements. Business Central design patterns must be used to develop all extensions.
Alpine Ski House must develop the following pages:
* Pages that provide multiple configurations in a multistep dialog, like a wizard, to provide required information when the extensions are first installed
* Department-specific Role Center pages to show relevant information and pages with additional information The IT department plans to use Power 61 to analyze departmental information. The database must be configured to provide optimal performance.
The housekeeping department requires the following to increase efficiency and help avoid data entry errors:
* A Housekeeping Role Center to minimize navigation to relevant areas In Business Central online and to show relevant information in it
* Pages to embed into a new Room page to show additional information about the Room entity
* A table named Room Incident for the housekeeping team to enter room issue information
* A Housekeeping canvas app that connects to an extension
The department requires the development of an extension with a new API page named RoomsAPI.
* The housekeeping team will use RoomsAPI to publish room details, update when work is complete, or provide repair notifications from the canvas app.
* This custom API page must expose a custom table named Rooms and have an ID 50000. The table must be able to update from the PMS. The PMS team must know the end to connect to the custom API.
* A developer provides the following details for the API page:
APIPublisher = 'alpine';
APIGroup - 'integration';
APIVersion - 'v2.6';
fntityName # 'room';
EntitySetName = 'rooms';
* The extension must be published in Business Central online and include a list page named Room List that includes all hotel rooms.
* Installation or updates to this extension must meet the following requirements:
o Some web services must be published automatically.
o The version of the specified application's metadata must be obtained in AL language.
o The code required to perform tasks cannot be accessible from other parts of the application.
The Room Incident table information must include the following fields:
* Incident entry: An incremental number
* Room No.: A room from the Room table
* Incident Date: The work date
o The table definition in the Room Incident table must autofill the Incident Date when the housekeeping team inserts a new record, o The value for Incident Date must be the work date configured in the Business Central online client.
* Status: Includes the following options lo identify the status of the incident:
o Open: When the Room Incident is created
o In Progress: When someone starts repair work
o Closed: When the incident is solved
* Incident Closing Date: Auto-updating field (when the status passes to Closed, the field will update with the work date)
* Incident Description: Text
* Image. Media data type
o The stored picture must be downloadable from a menu action.
o A Room Incident page must be developed to contain the download action.
To increase efficiency, the new system must manage the generated data from the restaurants and stores directly by using the API on the POS terminals.
* The company requires a code unit called from a job queue to read the information from the POS terminal APIs.
* The POS terminal information must be stored in a table named POS Information, have an ID 50100. and be editable on a page.
* The account manager requires an option on the menu of the page to run the process manually.
To analyze the information received from the POS terminals, the company requires:
* A custom API named ticketAPI to export the information to Power BI
* Use of the Read Scale-Out feature to improve database performance
The purchasing department requites a new entity in Business Central online to log non-conformities of goods received from vendors. The entity must be set up as follows:
* The non-conformity entity must have two tables:
o a header with common information
o one or more lines with the detailed received items that are non-conforming
* The entity requires a page named Non-conformity and a subpage named Non-Conformity Lines to store the information.
When a purchase order with incorrect quantity 01 quality issues is received, the entity must create a non- conformity document in the system. The following information must be nick the document:
* Non-conformity Number: must use the No. Series table from Business Central online to manage this field and use these features:
o Alphanumeric values
o Number format that includes "NO and the year as part of the number: for example, NC24-001
* Non-conformity Date: stores only the creation date
* Vendor No.: stores the number of the vendor that sent the items; only vendors from the company must be included
* Owner: code of an employee defined in the company
* Receipt No.: must meet the following conditions:
o Be an existing receipt No.
o Be received from the vendor indicated in the Vendor No. field
* Comments: can include comments with rich text and pictures to illustrate quality problems
* Status: includes nonconformity statuses, such as:
o Open
o Notified
o Closed
* Lines must contain the following details:
o Item No.: item received (for existing inventory items only)
o Description: item description
0 Quantity: non-conforming quantity
0 Non-conformity Type:
# Quality
# Quantity
# Delivery date
The serial numbers of the non-conformities and the period in which they can be created must be in a configuration table and its corresponding page to allow them to be modified for the users.
NEW QUESTION # 61
You create an 'AddltemsToJson" procedure and publish it.
The procedure fails to run.
You need to fix the errors in the code.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Answer:
Explanation:
Explanation:
* In line 13, replace the Add method with Insert. = NO
* In line 15, replace the WriteTo method with ReadFrom. = NO
* Change the ItemObject variable type from JsonObject to JsonToken. = NO
* Move line 08 in the beginning of REPEAT .. UNTIL. = YES
The provided code is intended to serialize a list of items from the Item table into a JSON array format. Here is a breakdown of the code and the necessary corrections:
* In line 13, "ItemsArray.Add(ItemObject)": This line is correctly using the Add method to add the ItemObject to the ItemsArray. The Add method is the correct method to use for adding items to a JsonArray. Therefore, there is no need to replace Add with Insert.
* In line 15, "ItemsArray.WriteTo(RequestText)": The WriteTo method is used correctly to serialize the ItemsArray into a JSON formatted string and store it in the RequestText variable. The ReadFrom method is used for the opposite operation, i.e., to deserialize a JSON formatted string into a JsonArray, which is not the goal in this context. Hence, no change is needed here.
* Change the ItemObject variable type from JsonObject to JsonToken: The ItemObject variable is intended to hold JSON objects representing individual items, making JsonObject the appropriate type.
JsonToken is not a type used in this context within AL for Business Central, and thus the variable type should remain as JsonObject.
* Move line 08, "Clear(ItemObject)": This line should be moved inside the repeat loop to ensure that the ItemObject is cleared for each item in the loop. Placing it before the repeat would only clear it once before the loop starts, which could lead to incorrect serialization as the previous item's properties would not be cleared from the ItemObject.
The logic for serializing records into JSON is a common operation when interfacing with APIs or web services in Business Central, and the pattern shown in the code is typical for such operations.
NEW QUESTION # 62
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result these questions will not appear in the review screen.
A company plans to optimize its permission sets.
The company has the following permission sets:
You need to provide the following implementation for a third permission set:
* Create a new Permission Set C that is a composite of Permission Set A and Permission Set B.
* Assign Permission Set C to a user.
You need to ensure that the user has only read access to the Job table.
Solution: Set the Included Permission Sets property to Permission Set B and the Excluded PermissionSets property to Permission Set A.
Does the solution meet the goal?
- A. No
- B. Yes
Answer: A
NEW QUESTION # 63
A company is deploying Business Central on-premises.
The company plans to use a single-tenant deployment architecture.
You need to describe how the data is stored and how the Business Central Server is configured.
In which two ways should you describe the single-tenant architecture? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
- A. The application and the business data are stored in the same database.
- B. Each customer has their own Business Central Server.
- C. Multiple customers share a single Business Central Server.
- D. The application and business data are stored in separate databases.
- E. Multiple customers share multiple Business Central Server instances.
Answer: A,B
NEW QUESTION # 64
You plan to create a table to hold client data.
You have the following data integrity requirements:
* Lookups into other records must be established.
* Validate if a record exists in a destination record.
You need to select the table field property to use for each requirement.
Which table field property should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
For the data integrity requirements, the table field properties to use are:
* To establish lookups into other records, use the TableRelation property.
* To validate if a record exists in a destination record, use the ValidateTableRelation property.
In Business Central, when creating tables to hold data, maintaining data integrity is crucial:
* TableRelation Property:This property is used to create a relationship between the field in one table and a field in another table, which is typically used for lookups. When you set the TableRelation property on a field, it allows users to select from a list of values that exist in the related table.
* ValidateTableRelation Property:This property is used to ensure that the value entered in a field matches one of the values in a related table. If a user tries to enter a value that doesn't exist in the related table, an error will occur.
NEW QUESTION # 65
You create a query that contains a procedure to display the top customers.
The procedure breaks at runtime.
You need to fix the code.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
* Enclose line 08 into BEGIN .. END = NO
* Add TopCustomerOverview.Open(); before = YES
* TopCustomerOverview.SetFilter(Sales_LCY, '>10000'); in line 06.
* Add TopCustomerOverview.Open(); after TopCustomerOverview.SetFilter(Sales_LCY, '>10000'); in line 06. = YES
* Replace SetFilter in line 06 with SetRange. = NO
The code provided has a runtime error because the query TopCustomerOverview must be opened before it can be read from. Therefore, TopCustomerOverview.Open(); should be added before trying to read from the query, which is not present in the code.
Enclosing line 08 into a BEGIN .. END block is unnecessary because it is a single statement, and AL does not require a BEGIN .. END block for single statements within trigger or procedure bodies.
TopCustomerOverview.SetFilter(Sales_LCY, '>10000'); is a correct method to set a filter for the query, and using SetRange instead is not necessary unless the requirement is specifically to set a range of values, which is not indicated in the procedure's description.
In summary, for the procedure to run correctly, the query must be opened after setting the filter and before attempting to read from it. The SetFilter method is correct for the intended operation, and there's no requirement to use SetRange or to enclose the Message call in a BEGIN .. END block.
NEW QUESTION # 66
A company plans to optimize its permission sets.
The company has the following permission sets:
You need to provide the following implementation for a third permission set:
* Create a new Permission Set C that is a composite of Permission Set A and Permission Set B.
* Assign Permission Set C to a user.
You need to ensure that the user has only read access to the Job table.
Solution: Set the IncludedPermissionSets property to Permission Set A and the ExcludedPermissionSets property to Permission Set B.
Does the solution meet the goal?
- A. No
- B. Yes
Answer: B
NEW QUESTION # 67
You have a decimal variable named AmountLCY.
You need to round up the variable to four decimal places.
Which result value should you use?
- A.
- B.
- C.
- D.
Answer: D
Explanation:
To round up a decimal variable to four decimal places in Microsoft Dynamics 365 Business Central, you should use the Round function with specific parameters. The correct formula is Result := Round(AmountLCY, 0.0001, '=') (B). This function rounds the AmountLCY variable to the nearest value based on the second parameter, which is 0.0001 in this case, representing four decimal places. The third parameter, '=', specifies that the function should round to the nearest value, which effectively rounds up the value when it's halfway between two possible rounded values. This approach ensures that the AmountLCY variable is accurately rounded to four decimal places, which is essential for financial calculations and reporting to maintain precision.
NEW QUESTION # 68
You need to define the tables used for the non-conformity entity.
What should you use?
- A. document table to introduce the non-conformity entities
- B. supplemental table to introduce the non-conformity lines
- C. document history table to introduce the non-conformity entities
Answer: A
Explanation:
Table Structure in Business Central: When creating entities such as "non-conformity" entities in Business Central, you use document tables to represent entities that have a header and line structure. In this case, the non-conformity entity has:
A header with common information (Non-conformity Number, Date, Vendor No., etc.).
One or more lines representing the detailed information for each non-conforming item.
Document Table Usage:
Document Table: A document table is the correct table type for scenarios where you have a header (with general information like vendor details) and lines (with detailed, item-specific information).
Document tables are typically used for entities such as Sales Orders, Purchase Orders, or any other transactional data where you have both header and line information.
Supplemental Table (Option C):
Supplemental tables are usually used to add supplementary information to existing data in Business Central. In this case, we need to store detailed line information, which is a core part of the entity rather than supplementary data, so a supplemental table would not be appropriate here.
Document History Table (Option A):
Document history tables are used to track changes and historical data for entities but are not suitable for the main introduction of the entity and its lines. This option is also not appropriate.
DRAG DROP Documentation:
Introduction to Business Central Tables
Document Tables in Business Central
NEW QUESTION # 69
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear on the review screen.
A company creates a Business Central app and a table named MyTable to store records when sales orders are posted.
Users report the following issues:
* The users receive permission errors related lo MyTable.
* Users are no longer able to post sales orders since installing the new app.
* The users cannot access the list page created in MyTable.
You need to resolve the user issues without creating new permission sets. You must use the principle of least privilege.
Solution: In the MyTable object add the property InherentPermissions = Rl.
Does the solution meet the goal?
- A. No
- B. Yes
Answer: B
NEW QUESTION # 70
You create a table with fields.
You observe errors in the code
You need to resolve the errors.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
* In line 12, declare "Job Task" as a variable. = NO
* Add the property FieldClass = FlowField; for field 3. = YES
* Add the property FieldClass = FlowFilter; for field 3. = NO
* In line 23, assign the "User Setup" table to a field. = YES
For "In line 12, declare 'Job Task' as a variable": In the AL code provided, the "Job Task" appears to be part of a CalcFormula of a FlowField, which means it references a table and not a variable. The "Job Task" does not need to be declared as a variable because it is used to reference a table in a CalcFormula expression.
For "Add the property FieldClass = FlowField; for field 3": The line of code CalcFormula = sum("Job Task
"."Recognized Sales Amount" where("Job No." = field("No."))); indicates that this field is calculated from other table data, which is the definition of a FlowField. Therefore, adding the property FieldClass = FlowField; is necessary for the field to function correctly.
For "Add the property FieldClass = FlowFilter; for field 3": FlowFilters are used to filter data based on the value in a flow field. Since field 3 is using a CalcFormula to sum values, it is a FlowField and not a FlowFilter. Therefore, this statement is not correct.
For "In line 23, assign the 'User Setup' table to a field": The line TableRelation = "User Setup"; suggests that the "Project Manager" field has a relation to the "User Setup" table, which is a method of assigning a table to a field to ensure that the values in "Project Manager" correspond to values in the "User Setup" table.
Hence, this statement is true.
NEW QUESTION # 71
You need to parse the API JSON response and retrieve each order no. in the response body.
How should you complete the code segment? To answer select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 72
A company plans to set up a local Business Central Development Docker container. The environment will be used for testing new project ideas.
You need to ensure that the most recent Business Central artifact URL has been selected. Which command should you use?
- A. Get-BcArtifactUrl -type sandbox -select Current
- B. Get-BcArtifactUrl -type sandbox -select Closest
- C. Get-BcArtifactUrl -type sandbox -select NextMinor
- D. Get-BcArtifactUrl -type sandbox -select NextMajor
Answer: A
Explanation:
To ensure the most recent Business Central artifact URL is selected for setting up a local Business Central Development Docker container, the command to use is Get-BcArtifactUrl -type sandbox -select Current (A). This PowerShell command retrieves the URL for the latest available Business Central artifact for a sandbox environment, ensuring that the Docker container is set up with the most up-to-date version for testing new project ideas. The -select Current parameter is crucial as it specifies that the current, or latest, version of the artifact is to be retrieved, as opposed to selecting a version based on other criteria such as Closest, NextMinor, or NextMajor.
NEW QUESTION # 73
......
Microsoft MB-820 Dumps Cover Real Exam Questions: https://www.braindumpspass.com/Microsoft/MB-820-practice-exam-dumps.html
Real MB-820 dumps - Real Microsoft dumps PDF: https://drive.google.com/open?id=1IrRBkNk4H8LZBmclsxvHSlQNcN_nofRN
