Real NCSC-Level-1 Exam PDF Test Engine Practice Test Questions
Nutanix NCSC-Level-1 Real 2022 Braindumps Mock Exam Dumps
NEW QUESTION 20
Which Nutanix feature creation is described in the Knowledge Transfer?
- A. REST API
- B. Calm Blueprints
- C. Data Protection Domain
- D. Self Service Portal
Answer: C
NEW QUESTION 21
A consultant configures a Nutanix cluster and integrates the hosts into vCenter using VMware best practices. The customer has requested that the Nutanix cluster only have a single datastore.
Upon configuring the cluster per the customer requirements, vCenter displays an alert regarding the heartbeat datastore. The consultant adds the das.ignoreInsufficientHbDatastore value = true rule. The container can be seen from each host, but the alert remains active.
What should the consultant do to resolve this issue?
- A. Whitelist the vCenter IP address within Prism.
- B. Turn off and then turn back on HA.
- C. Make sure the DRS setting is turned on.
- D. Create a second container.
Answer: B
NEW QUESTION 22
A consultant needs to verify the make and model of the systems that will be imaged with Foundation. The consultant does not have the Bill of Materials (BOM) available to review.
When should the consultant verify the make and model to prepare for the cluster deployment?
- A. When reviewing the Statement of Work (SOW)
- B. While conducting the Tech Review Call
- C. During the Foundation Process
- D. Upon arriving on-site
Answer: C
NEW QUESTION 23
Refer to the exhibits.
A consultant is trying to test port failover on the node shown in the first exhibit. A continuous ping test is performed to the host. The consultant shuts down one of the links, after which the host ping request times out. The consultant tries to troubleshoot the issue with the customer and sees the information shown in the second exhibit on their Cisco Switches:
What is causing the issue?
- A. Bad SPF+ cables are on the active interface.
- B. The wrong VLAN is tagged on the host.
- C. PortFast is not enabled on the port connected to the host.
- D. There is a Native VLAN mismatch on the switchport.
Answer: D
NEW QUESTION 24
A consultant is setting up a new vSphere cluster. Customer requirements are as follows:
* VMs should automatically failover to another host if the host crashes
* Host CPU and Memory resources should be evenly balanced
* New VMs should be placed on the host with the most resources available Which two settings should be turned on to meet the requirements? (Choose two.)
- A. vSphere vMotion
- B. vSphere HA
- C. vSphere Power Management
- D. vShpere DRS
Answer: B,D
NEW QUESTION 25
A customer racks all nodes in the new cluster. The customer does not allow IPv6 for node discovery.
The consultant is not allowed to use the consultant's own flat switch in the customer's environment.
Which step should the consultant take to resolve this issue?
- A. Connect to the top of rack switch and discover the nodes with IPv4.
- B. Image each node individually with Foundation VM.
- C. Open a console to all nodes and statically assign IP addresses.
- D. Bare metal image all nodes with Foundation VM.
Answer: C
NEW QUESTION 26
A consultant is deploying a two-node cluster at a remote branch office.
Which component must be available to complete cluster configuration?
- A. Witness VM
- B. Remote Site
- C. Prism Central
- D. Protection Domain
Answer: A
NEW QUESTION 27
A consultant has deployed a new Nutanix AHV cluster with Foundation. The customer requests separating the management and production traffic in the CVM.
Which feature should the consultant configure?
- A. VLAN Tagging
- B. Micro-segmentation
- C. Multi-homing
- D. Network Segmentation
Answer: C
NEW QUESTION 28
A consultant is performing a Nutanix Cluster installation on Dell XC Core hardware. The consultant decides to use Foundation Portable for Mac to perform the installation. When the consultant arrives onsite, Foundation Portable is unable to locate the new nodes.
Which log should the consultant check to troubleshoot this issue?
- A. /home/nutanix/foundation/log
- B. ~/data/logs/foundation
- C. foundation.app/contents/resouces/log
- D. ~/data/logs/foundation.out
Answer: A
NEW QUESTION 29
While preparing for a new four-node cluster installation, the consultant has a Tech Review Call with the customer. The hardware is as follows:
* 4 nodes in 1 Block
* 8 x 10 GbE Ports
* 4 x 1 GbE IPMI Ports
* Adequate Ethernet ports are available
* Ethernet cables are correct and available
* Adequate rack space is available
Which remaining item must be confirmed as available onsite?
- A. Redundant 208v power
- B. Fibre Channel switches
- C. Crash Cart
- D. Redundant 110v power
Answer: A
NEW QUESTION 30
A consultant is running the Foundation VM using desktop virtualization software. No nodes are discovered.
What should the consultant verify first?
- A. Host-only Adapter
- B. NAT
- C. Bridged Adapter
- D. Internal Network
Answer: C
NEW QUESTION 31
A customer wants to know the details of network validation testing.
Where can the consultant find this information?
- A. Test plan
- B. Handover checklist
- C. As-Built Guide
- D. Operations Guides
Answer: B
NEW QUESTION 32
Which subnet is reserved for internal connectivity within a Nutanix Cluster?
- A. 192.168.5.0/24
- B. 192.168.5.0/26
- C. 192.168.5.0/23
- D. 192.168.254.0/24
Answer: A
NEW QUESTION 33
Refer to the exhibit.
A consultant is deploying a cluster using the customer-provided IP addressing information.
Which option in Foundation must be configured to ensure connectivity during the deployment?
- A. Range Autofill
- B. Multi-homing
- C. Link Aggregation
- D. Network Segmentation
Answer: B
NEW QUESTION 34
A consultant runs the Foundation Applet and discovers all the nodes. The consultant wants to use the latest version of Foundation for imaging for support purposes and to cover the latest hardware and software hypervisor support.
What should the consultant do to upgrade Foundation on a node?
- A. Use crash cart and manually upgrade Foundation files on one node.
- B. Use the Foundation Applet to upgrade Foundation on a single node.
- C. Use the Foundation VM to upgrade Foundation on all nodes.
- D. Use latest version of Foundation to reimage all the nodes.
Answer: B
NEW QUESTION 35
A consultant successfully completes a Foundation using a flat switch. The consultant then works with the customer to move the cluster over to their production network. After the move, the CVMs and hypervisors can no longer communicate, which prevents the cluster from starting.
Which option should be used to resolve this issue?
- A. If the IPMI is in use, check that the IPMI can ping the default gateway over IPv6.
- B. If using VLANs, confirm the hypervisor/CVM VLAN is set as Native on the switch ports.
- C. Make sure that the IPMI and CVM VLAN is manually tagged on the Host and CVM.
- D. Verify that IPv6 Link Local and DHCP is enabled on all switch ports.
Answer: B
NEW QUESTION 36
A consultant is running Foundation. The cluster creation fails during the process. The host logs confirm that the nodes have been successfully imaged. The consultant decides to create the cluster manually.
Which command should the consultant use?
- A. cluster -c IP_CVM_A, IP_CVM_B, IP_CVM_n
- B. cluster -s IP_CVM_A, IP_CVM_B, IP_CVM_n create_manual
- C. cluster create -s IP_CVM_A, IP_CVM_B, IP_CVM_n
- D. cluster -s IP_CVM_M, IP_CVM_B, IP_CVM_n create
Answer: C
NEW QUESTION 37
A customer buys ultimate licensing and wants to use the built-in Nutanix software encryption on their new AHV cluster. The customer needs to create three storage containers and asks the consultant to complete the process as fast as possible.
In which order should the cluster be deployed?
- A. Create Cluster -> Create Storage Containers -> Encrypt Cluster -> Install License Key
- B. Create Cluster -> Install License Key -> Create Storage Containers -> Encrypt Cluster
- C. Create Cluster -> Encrypt Cluster -> Install License Key -> Create Storage Containers
- D. Create Cluster -> Install License Key -> Encrypt Cluster -> Create Storage Containers
Answer: B
NEW QUESTION 38
A customer has a G6 AHV cluster with 4x10GbE NICs on each node and the following configuration:
* Networking is set to default
* Only two NICs are connected
The customer receives the following critical message:
The NIC is disconnected from the switch, or the switchport is failing.
What should the consultant verify to resolve the issue?
- A. The VLANs are configured correctly on the switch or tagged on the cluster.
- B. The NICs are configured for active-backup.
- C. The other two 10GbE connections are removed from the default bond.
- D. The NICs are connected for balance-slb.
Answer: B
NEW QUESTION 39
A consultant is installing Nutanix AOS on Cisco UCS.
Which method should be used to install AOS on UCS hardware platforms?
- A. Foundation VM
- B. Foundation Central
- C. Foundation as a Service
- D. Foundation Applet
Answer: A
NEW QUESTION 40
Refer to the exhibit.
A consultant is installing AOS 5.10 and ESXi 6.5 on three nodes. During the Foundation process, ESXi 6.5 is not available as one of the choices for hypervisor.
Which solution should the consultant use?
- A. Upload ESXi image to /home/Nutanix/foundation/nos/hypervisor/esx.
- B. Restart Foundation VM and refresh Foundation page.
- C. Update the Foundation whitelist from the support portal.
- D. Upload ESXi image to /home/Nutanix/foundation/isos/hypervisor/esx.
Answer: D
NEW QUESTION 41
After installation, network ports are properly configured with the default active-backup bonding.
One 10GbE port goes to switch 1. Another 10GbE port goes to switch 2. A consultant tests failover by manually pulling one of the cables and notices it is taking too much time to failover, which is causing excessive packet loss.
What should the consultant enable to resolve this issue?
- A. PAgP
- B. Jumbo frames
- C. LACP on switch
- D. Portfast
Answer: D
NEW QUESTION 42
......
Prepare For The NCSC-Level-1 Question Papers In Advance: https://www.braindumpspass.com/Nutanix/NCSC-Level-1-practice-exam-dumps.html
