Pass HP HPE0-S60 exam questions - convert Test Engine to PDF
Pass Your HPE0-S60 Exam Easily - Real HPE0-S60 Practice Dump Updated Jun 01, 2023
The HP HPE0-S60 (Delta - HPE Compute Solutions) certification exam is designed for IT professionals who are seeking to validate their skills in the HPE compute solutions domain. This certification exam is targeted at candidates who already have an HPE ASE or HPE ATP certification and want to update their skills in the latest HPE compute solutions technologies. Passing this exam will demonstrate that the candidate has the knowledge and skills required to architect, design, install, configure, and manage HPE compute solutions.
The HPE0-S60 certification exam is a delta exam, which means it is intended for individuals who have already passed the HPE ASE – Server Solutions Architect V3 or V4 certification exams. This exam is designed to test the skills and knowledge required to work with the latest HPE compute solutions and technologies, including the latest HPE server hardware, software, and management tools.
The HP HPE0-S60 Certification Exam covers a wide range of topics related to HPE Compute Solutions. Some of the key topics covered in the exam include HPE ProLiant Gen10 servers, HPE Synergy solutions, HPE OneView, HPE SimpliVity, HPE Apollo systems, HPE BladeSystem solutions, HPE StoreVirtual Storage solutions, and HPE Composable Infrastructure. The exam also covers topics related to HPE Server Management Tools, HPE Integrated Lights-Out (iLO), and HPE Intelligent Provisioning.
NEW QUESTION # 26
Your customer plans to deploy ESXi systems to HPE Synergy and HPE ProLiant servers using HPE OneView for VMware vCenter Server.
Which statement about HPE OneView for VMware vCenter Server functionality is true for this environment?
- A. Only systems managed using HPE Oneview can use HPE Oneview for VMware vCenter Server functionalities
- B. HPE ProLiant servers need an HPE OneView for VMware vCenter Server license for full functionality
- C. Individual systems can be added to HPE OneView for VMware vCenter Server through an ILO management processor
- D. HPE Synergy requires HPE Composer 2 for full functionality of HPE OneView for VMware vCenter Server
Answer: B
NEW QUESTION # 27
Match HPE SimpliVity team with the definition.
Answer:
Explanation:
NEW QUESTION # 28
Your customer added a new Ethernet network in HPE Oneview mat is used to manage their HPE Synergy platform.
When the customer tries to connect one of the compute nodes to this network through the server profile, this network is not available.
What must be done to fix this issue?
- A. The newly created network must be added to the uplink set within the LIG, and Logical interconnect configuration must be updated from the LIG.
- B. Check the Logical Enclosure settings and verify if the maximum number of networks allowed for this LE is reached.
- C. Check within the server profile which server hardware is used and perform the Refresh operation on this compute node to get the latest adapter information.
- D. To make this network available to use in the server profile, the customer must enable the Smart Link feature within network definition.
Answer: A
NEW QUESTION # 29
Click the area within the iLO management interface that will allow you to access workload Advisor.
Answer:
Explanation:
NEW QUESTION # 30
Which HPE Virtual Connect feature allows an administrator to suppress excessive inbound multicast broadcast and destination lookup failure (OLF) packets?
- A. LLDP tagging
- B. Pause flood protection
- C. Storm control
- D. Loop protection
Answer: C
NEW QUESTION # 31
Your customer plans to deploy VMware ESXi 7. 0 U2, and they are looking for a hardware platform that will allow them to use up to 16 CPU sockets Which HPE compute system meets the customer requirements?
- A. HPE ProLiant OL380 Gen 10 Plus
- B. HPE Synergy 480 Gen10 Plus
- C. HPE Superdome Flex system
- D. HPE ProLiant DL580 Gen10
Answer: B
NEW QUESTION # 32
Match HPE SimpliVity term with the definition.
Answer:
Explanation:
NEW QUESTION # 33
Which compute node parameters are captured within server hardware type?
- A. Number of the CPUs
- B. Size of the memory Installed
- C. Mezzanine card configuration
- D. installed operating system
Answer: D
NEW QUESTION # 34
Your customer has 6 logical enclosures spanning 18 HPE Synergy frames. The customer needs to add one more logical enclosure based on 5 HPE Synergy frames How will this change impact the customer environment?
- A. The customer can add a new logical enclosure to an existing setup once all required licenses are added lo HPE OneView and associated with the new frames.
- B. The customer has to create a new management ring for new logical enclosure because the maximum number of frames m a single management ring is reached.
- C. The customer can add a new logical enclosure to the existing setup because the maximum number of logical enclosures in a single management ring is not reached.
- D. The customer has to expand the management ring capacity either by adding HPE Composer 2 modules or adding memory to reach 128GB per module.
Answer: C
NEW QUESTION # 35
Which statement about a new HPE SimpliVity deployment is true?
- A. All new HPE SimpliVity models are based on AMD CPUs
- B. New HPE SimpliVity deployments give customer flexible choice of hypervisor
- C. New HPE SimpliVity deployments are licensed per node not per physical socket
- D. All new HPE SimpliVity models support deduplication and compression
Answer: D
NEW QUESTION # 36
Which statement about login redistribution is true?
- A. Login redistribution is supported only on the HPE Synergy Virtual Connect SE 32Gb FC Modules
- B. Login redistribution is a licensed feature and the number of licenses required depends on the number of active ports
- C. Login redistribution is available only If HPE Primera or HPE Alletra is connected directly to the HPE Synergy frame
- D. Login redistribution is used for login balancing when they are not distributed evenly over the FC links
Answer: A
NEW QUESTION # 37
Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that compute nodes cannot access the storage module. What should you verify first when troubleshooting this problem?
- A. If there Is a logical interconnect created based on the 12Gb SAS switches.
- B. If there is at least one ISCSI network configured that will provide access to the module.
- C. If the D3940 module is imported in managed state that allows volume provisioning.
- D. If the D3940 storage module is property licensed through HPE OneView interface.
Answer: C
NEW QUESTION # 38
What is a restriction of using a RoCE network?
- A. It does not support Private VLAN and Multicast VLAN.
- B. It does not support smart link and private network features.
- C. it is not supported with HPE Virtual Connect SE 40 GD F8 Module for HPE Synergy.
- D. It is by default configured as an untagged network and cannot be a part of a network set.
Answer: D
NEW QUESTION # 39
Which tool can be used to evaluate me health of an HPE Oneview appliance before proceeding with an appliance updated.
- A. HPE OneView Firmware Compliance Report
- B. HPE OneView Update Readiness Checker
- C. HPE Composer Maintenance Console
- D. HPE OneView Global Dashboard
Answer: C
NEW QUESTION # 40
Your customer plans to deploy HPE OneView for VMware vCenter Server together with HPE Storage Integration Pack for VMware vCenter. The customer wants to use them to manage HPE Synergy Gen10 compute modules. HPE ProLiant Gen 10 servers and an MSA array.
Which statement about compatibility of the existing environment with the planned software components is true?
- A. HPE OneView for VMware vCenter Server does not support standalone HPE ProLiant servers
- B. Both HPE Synergy Gen10 full-height compute module plugins will require a license
- C. HPE Storage integration Pack for VMware vCenter does not support MSA arrays
- D. To use the required plugins HPE ProLiant Gen10 systems must be managed using HPE OneView
Answer: A
NEW QUESTION # 41
Your customer has the following HPE Synergy setup
- 3 HPE Synergy 12000 Frames
- 4 HPE Virtual Connect SE 100 Gb F32 Modules
- 2 HPE Synergy 50 GO Interconnect Link Modules
- 36 HPE Synergy 480 Gen10 Plus compute modules
- 2 HPE Composer 2 modules
Which statement about this setup is true?
- A. The customer can add one D3940 storage Module to each of the frames
- B. To use all compute nodes, the customer must create at least two logical enclosures
- C. To manage all frames, the customer must buy two additional HPE Composer 2 modules
- D. The customer must buy 36 HPE OneView Advanced licenses to manage compute modules
Answer: D
NEW QUESTION # 42
Your customer wants to compare HPE Superdome Flex with HPE Superdome Flex 280.
Which statement about these two systems is true?
- A. Only HPE Superdome Rex 280 can be managed using HPE OneView
- B. Only HPE Superdome Flex supports 32 sockets and 48TB of memory
- C. Only HPE Superdome Flex 280 can support multiple nPars
- D. Only HPE Superdome Flex supports HPE Persistent Memory
Answer: A
NEW QUESTION # 43
In the past a customer experienced a networking issue where network ports went down and came back up in quick succession.
Which HPE Virtual Connect SE 100 GD F32 Module for HPE Synergy feature can be configured to disable such ports?
- A. Port flap protection
- B. Storm control
- C. sFlow
- D. Pause flood protection
Answer: C
NEW QUESTION # 44
Which statement about an HPE Oneview support dump is true?
- A. Support dump is a binary file that can be opened only in a dedicated application
- B. Appliance support dump by default contains a logical enclosure support dump
- C. Preview support dump is available only when creating an appliance support dump
- D. Support dump can be created if HPE Virtual Connect modules are installed in the frame
Answer: A
NEW QUESTION # 45
As a result of the troubleshooting process, you recommend replacing, HPE Synergy Composer modules which HPE Synergy Composer 2 Why would you recommend this change?
- A. HPE Composer 2 can support more than the maximum 21 frames that are supported with HPE Composer 1 and HPE OneView.
- B. HPE Composer 2 provides access to 105 interface that can be used for full management of HPE Composer 2 remotely
- C. HPE Composer 1 running HPE OneView 5 2 or later can support only 12 frames within a single management nog
- D. HPE Composer 1 cannot support remote frames, which doubles the configuration and management procedures effort
Answer: C
NEW QUESTION # 46
Which statement about the SY480 Gen10 Plus Compute Module is true?
- A. It supports "3rd Gen AMO EPYC Server Processors with 64 cores.
- B. It cannot be mixed with Gen9 compute modules in the same frame.
- C. It supports 8 memory channels and memory DIMMs of up to 256GB.
- D. It only supports NVDIMM Persistent Memory.
Answer: D
NEW QUESTION # 47
After HPE Superdome Flex deployment and nPar setup, you need to verify health status of HPE Superdome Flex components.
Put the steps on the left into the coned order on the right to perform this task.
Answer:
Explanation:
NEW QUESTION # 48
......
HPE0-S60 Real Exam Questions and Answers FREE: https://www.braindumpspass.com/HP/HPE0-S60-practice-exam-dumps.html
2023 Realistic Verified Free HP HPE0-S60 Exam Questions: https://drive.google.com/open?id=17rEWbdiTF6Zg6a0lQEEQUwi1q79Agh0J
