Pass Citrix 1Y0-241 Exam Quickly With BraindumpsPass
Prepare 1Y0-241 Question Answers - 1Y0-241 Exam Dumps
Citrix 1Y0-241: Deploy and Manage Citrix ADC 13 with Traffic Management Exam Topics
Candidates must know the exam topics before they start preparation. Because it will help them in hitting the core. Our 1Y0-241 dumps will include the following topics:
Section 1: Identification of Basic Components
- Determine the deployment and licensing options for a given environment.
- Determine how to configure Access Control Lists based on given requirements.
- Determine which interfaces IP address types and VLANS to use during configuration of a given environment.
- Identify Citrix ADC hardware and its components.
- Determine how to set up and configure Citrix ADC.
- Identify which Citrix ADC routing and traffic-handling mode should be used for a given environment
Section 2: Basic Networking
- Determine the specific function of the SDX when given various SDX interface allocation scenarios
- Understand how the high availability (HA) process works on Citrix ADC.
- Determine which networking topology to use with Citrix ADC based on given requirements.
Section 3: Citrix ADC Platforms
- Determine how to resolve common high availability issues.
- Identify the pieces of the multi-tenant structure for Citrix ADC SDX.
- Determine which method should be used to manage a Citrix ADC high availability configuration given a scenario.
- Determine which hardware to use (Citrix ADC MPX, VPX, CPX, BLX, or SDX) when given a use case.
- Determine the appropriate Citrix ADC high availability configuration options, including advanced settings, described an environment.
Section 4: Load Balancing
- Determine when to use the different load-balancing and monitoring options
- Determine how to customize monitoring and service options based on a scenario.
- Identify the Citrix ADC load-balancing role of entities.
- Determine which method to use to protect and troubleshoot a Citrix ADC load-balancing configuration based on a given scenario.
- available on the Citrix ADC.
Section 5: SSL Offload
- Determine how to create SSL virtual servers.
- Determine which Citrix ADC configuration settings can prevent a given SSL Exploit.
- Determine which SSL deployment to use for a given environment.
- Determine the process and requirement for creating and uploading SSL Certificates.
Section 6: Securing the Citrix ADC
- Determine how to utilize Content Switching components.
- Determine how to monitor the Citrix ADC environment with Simple Network Management Protocol data.
- Determine how to resolve Citrix ADC log issues.
- Determine how to use Content Switching policies in a given environment.
- Determine how to utilize responder policies for a given environment.
- Determine how to utilize authentication, authorization, and auditing.
- Determine how to utilize the rewrite feature for a given environment.
- Determine how to use the Citrix Application Delivery Management to troubleshoot a given issue.
- features to troubleshoot an issue within Citrix ADC.
- Determine how to utilize admin partitions in a given scenario.
- Determine which Citrix ADC troubleshooting tool to use to identify a given issue in an environment.
- Determine the components and steps required to secure a Citrix ADC configuration.
- Determine how to use AppFlow and Citrix Application Delivery Management
- Determine how to utilize patterns and data sets within a given environment.
- Determine how to use URL transformation in a given environment.
- Determine how to configure authentication and authorization on Citrix ADC.
- Determine how to rule precedence affects policies.
Section 7: Optimization
- Determine how to deploy Domain Name System (DNS) to support GSLB in a given environment.
- Determine how to Implement GSLB in a Citrix ADC environment.
- Determine how to customize a GSLB configuration based on the needs of an environment.
- Determine how to utilize Content Switching to implement GSLB.
- Determine how to implement traffic compression in a Citrix ADC environment.
- Determine how to use GSLB metric exchange protocol.
- Determine how to configure front-end optimization to render the web browser more efficient.
NEW QUESTION 12
Scenario: A Citrix ADC receives packets destined for a MAC address owned by the Citrix ADC. The destination IP address of the packets does NOT belong to the Citrix ADC. Layer 3 mode is enabled by default on the Citrix ADC.
The Citrix ADC will __________ the packets in this scenario. (Choose the correct option to complete the sentence.)
- A. drop
- B. process
- C. route
- D. bridge
Answer: C
NEW QUESTION 13
A Citrix Administrator receives user complaints about latency while accessing an application that is load balanced on the Citrix ADC.
Which tool can the administrator use to gather information regarding response time, client network latency, and server-side processing time?
- A. WAN Insight
- B. Security Insight
- C. Citrix Application Delivery Management (ADM)
- D. HDX Insight
Answer: D
NEW QUESTION 14
Scenario: A Citrix Administrator configured Citrix ADC load balancing to send requests to one of three identical backend servers. Each server handles multiple protocols, and load balancing is set up in round-robin mode.
The current load-balancing setup on the Citrix ADC is:
* One load-balancing vServer with one externally accessible VIP
* One service created for each protocol type
* One server entity for each backend resource
During business hours, the administrator wants to make changes to one backend server without affecting the other servers.
What is the most efficient way for the administrator to ensure that all traffic is routed away from the server without impeding responses from other resources?
- A. Disable the backend service entity targeted for change.
- B. Disable the backend server entity targeted for change.
- C. Disable the load-balancing vServer.
- D. Unbind the correct server entity from the load-balancing vServer.
Answer: C
NEW QUESTION 15
A Citrix Administrator is creating a new SSL vServer and notices the ns_default_ssl_profile frontend SSL profile is automatically bound to the SSL vServer.
Which two actions can the administrator perform to change or remove the ns_default_ssl_profile_frontend SSL profile once it is enabled? (Choose two.)
- A. Globally disable the ns_default_ssl_profile_frontend SSL profile.
- B. Create a separate SSL profile.
- C. Unbind the ns_default_ssl_profile_frontend SSL profile from the SSL vServer without binding a replacement SSL profile.
- D. Globally unbind the ns_default_ssl_profile_frontend SSL.
- E. Unbind the default SSL profile and bind the newly created SSL profile.
Answer: A,E
NEW QUESTION 16
Scenario: A load-balancing vServer is configured to utilize the least bandwidth load-balancing method. A service attached to this vServer is brought into the effective state during production hours.
During the startup of a vServer, which load-balancing method is used by default?
- A. Round-robin
- B. Least bandwidth
- C. Least connections
- D. Custom load
Answer: C
NEW QUESTION 17
Scenario: A Citrix Administrator needs to improve website loading speed. End users are reporting slow GIF image rendering speeds as they scroll down a website, which affects overall page load time.
Which Citrix ADC feature can the administrator enable to improve website performance?
- A. Image optimization
- B. Image lazy loading
- C. Image shrink-to attributes
- D. Domain sharding
Answer: A
Explanation:
Explanation
NEW QUESTION 18
A Citrix Administrator configured an external syslog server but is NOT seeing detailed TCP information?
What could be causing this?
- A. Log facility is NOT configured.
- B. TCP logging is NOT enabled.
- C. Log level is NOT enabled.
- D. User-defined audit log is NOT configured.
Answer: C
NEW QUESTION 19
Which two policies can a Citrix Administrator configure using only the advanced policy expression? (Choose two.)
- A. DNS
- B. Integrated caching
- C. System
- D. SSL
Answer: A,B
NEW QUESTION 20
Which two protocols would provide end-to-end data encryption, while allowing a Citrix ADC to optimize the responses? (Choose two.)
- A. HTTP protocol for the vServer
- B. HTTP protocol for the services
- C. SSL bridge protocol for the services
- D. SSL protocol for the vServer
- E. SSL bridge protocol for the vServer
- F. SSL protocol for the services
Answer: D,F
NEW QUESTION 21
Which step can a Citrix Administrator take to use default compression policies?
- A. Enable compression on the associated bound services.
- B. Bind the default compression policies to the vServer.
- C. Select the compression algorithm (gzip/deflate/identity).
- D. Disable the Citrix ADC compression feature at a global level.
Answer: C
NEW QUESTION 22
What
is the effect of the "set cs vServer-CS-1 -redirectURL http://www.newdomain.com/mysite/" command?
- A. All the requests without URL path/mysite/ will be redirected to http://www.newdomain.com/mysite/.
- B. If
the status of vServer-CS-1 is DOWN, then users will be redirected to http://www.newdomain
.com/mysite/. - C. If
the vServer-CS-1 encounters a high connection rate, then users will be redirected to
http://www.newdomain.com/mysite/. - D. All
the requests to vServer-CS-1 will be redirected to http://www.newdomain.com/mysite/.
Answer: B
NEW QUESTION 23
Scenario: A Citrix Administrator configured a global server load balancing (GSLB) setup for internal and external users using the same host name. For internal users, cvad.citrite.net should go to the Citrix StoreFront site; for external users, it should connect to the Citrix ADC Gateway VPN site.
Which feature should the administrator configure to accomplish this?
- A. DNS Record
- B. DNS View
- C. DNS Preferred Location
- D. DNS Proxy
Answer: B
NEW QUESTION 24
To protect an environment against Hash DoS attacks, which two configurations can a Citrix Administrator use to block all post requests that are larger than 10,000 bytes? (Choose two.)
- A. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\")&&
http.REQ.CONTENT_LENGTH.GT(10000)"
> add responder policy pol_resp_hashdos_prevention expr_hashdos_prevention DROP NOOP
> bind responder global pol_resp_hashdos_prevention 70 END -type REQ_OVERRIDE - B. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\") ||
http.REQ.CONTENT_LENGTH.GT(10000)"
> add rewrite policy drop_rewrite expr_hashdos_prevention DROP
> bind rewrite global drop_rewrite 100 END -type REQ_OVERRIDE - C. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\")&&
http.REQ.CONTENT_LENGTH.GT(10000)"
> add rewrite policy drop_rewrite expr_hashdos_prevention DROP
> bind rewrite global drop_rewrite 100 END -type REQ_OVERRIDE - D. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\") ||
http.REQ.CONTENT_LENGTH.GT(10000)"
> add responder policy pol_resp_hashdos_prevention expr_hashdos_prevention DROP NOOP
> bind responder global pol_resp_hashdos_prevention 100 END -type REQ_OVERRIDE - E. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\") ||
http.REQ.CONTENT_LENGTH.GT(10000)"
> add responder policy pol_resp_hashdos_prevention expr_hashdos_prevention DROP NOOP
> bind responder global pol_resp_hashdos_prevention 70 END -type REQ_OVERRIDE - F. > add policy expression expr_hashdos_prevention "http.REQ.METHOD.EQ(\"POST\") ||
http.REQ.CONTENT_LENGTH.GT(10000)"
> add rewrite policy drop_rewrite expr_hashdos_prevention DROP
> bind rewrite global drop_rewrite 70 END -type REQ_OVERRIDE
Answer: A,D
Explanation:
Explanation/Reference: https://support.citrix.com/article/CTX131868
NEW QUESTION 25
Scenario: While using the GUI, a Citrix ADC MPX appliance becomes unresponsive. A Citrix Administrator needs to restart the appliance and force a core dump for analysis.
What can the administrator do to accomplish this?
- A. Use the reset button on the front of the appliance.
- B. Turn off the appliance using the power button.
- C. Use the NMI button on the back of the appliance.
- D. Connect to a USB port to issue a restart command.
Answer: C
NEW QUESTION 26
Which feature can a Citrix Administrator use to create a consistent set of front-end SSL parameters across multiple SSL vServers?
- A. SSL policy
- B. SSL multiplexing
- C. SSL bridge
- D. SSL profile
- E. SSL policy
Answer: D
NEW QUESTION 27
Scenario: A Citrix Administrator executed the command below:
> set httpcallout httpcallout1 -cacheForSecs 120
This command changes the cache duration of the HTTP ____________ to be set to 120 seconds. (Choose the correct option to complete the sentence.)
- A. callout response
- B. request
- C. callout request
- D. response
Answer: A
NEW QUESTION 28
Scenario: A Citrix Administrator executed the following command in a global server load balancing (GSLB) environment:
set gslb site SiteB -triggerMonitor MEPDOWN
What will be the effect of this command on the default service monitoring behavior on a remote site?
- A. The service monitor will take precedence over Metric Exchange Protocol (MEP).
- B. The service monitor is invoked only when Metric Exchange Protocol (MEP) has marked the service as DOWN.
- C. The service monitor is invoked only when Metric Exchange Protocol (MEP) connectivity has been lost between Site A and Site B.
- D. The state of the GSLB service will always be controlled by Metric Exchange Protocol (MEP).
Answer: B
NEW QUESTION 29
Scenario: A Citrix Administrator configured a load-balancing vServer. The URL for this vServer is vpn.citrix.com. The backend server has the host name configured as server1.citrix.com.
The administrator needs to implement the policy to change the host name from vpn.citrix.com to server1.citrix.com, and vice versa.
Which does the administrator need to configure to meet this requirement?
- A. set transform action "host change" -priority 10 -reqUrlFrom "https://server1.citrix.com/*" -reqUrlInto
"https://vpn.citrix.com/*" -resUrlFrom "https://server1.citrix.com/*" -resUrlInto "https://vpn.citrix.com/*" - B. set transform action "host change" -priority 10 -reqUrlFrom "https://vpn.citrix.com/*" -reqUrlInto "https:// server1.citrix.com/*" -resUrlFrom "https://vpn.citrix.com/*" -resUrlInto "https://server1.citrix.com/*"
- C. set transform action "host change" -priority 10 -reqUrlFrom "https://vpn.citrix.com/*" -reqUrlInto "https:// server1.citrix.com/*" -resUrlFrom "https://server1.citrix.com/*" -resUrlInto "https://vpn.citrix.com/*"
- D. set transform action "host change" -priority 10 -reqUrlFrom "https://server1.citrix.com/*" -reqUrlInto
"https://vpn.citrix.com/*" -resUrlFrom "https://vpn.citrix.com/*" -resUrlInto "https://server1.citrix.com/*"
Answer: B
NEW QUESTION 30
Scenario: A Citrix Administrator downloaded and deployed Citrix Application Delivery Management (ADM) in an environment consisting of six Citrix ADCs and 100 virtual servers. When viewing the Citrix ADM console, the administrator sees only 30 virtual servers.
Why is the administrator unable to see all 100 virtual servers?
- A. Additional Citrix ADM systems need to be deployed to see all virtual servers.
- B. The nsroot passwords are NOT the same across all the Citrix ADCs.
- C. Citrix ADM is using a free license.
- D. The Citrix ADC and Citrix ADM firmware versions are NOT the same.
Answer: A
NEW QUESTION 31
A Citrix Network Engineer informs a Citrix Administrator that a data interface used by Citrix ADC SDX is being saturated.
Which action could the administrator take to address this bandwidth concern?
- A. Configure a failover interface set on each Citrix ADC VPX instance.
- B. Configure LACP on the SDX for management interface.
- C. Add a second interface to each Citrix ADC VPX instance.
- D. Configure LACP on the SDX for the data interface.
Answer: D
NEW QUESTION 32
A Citrix Administrator needs to confirm that all client certificates presented to the authentication vServer are valid until the year 2023.
Which expression can the administrator use to meet this requirement?
- A. CLIENT.SSL.CLIENT_CERT.VALID_NOT_AFTER.EQ(GMT2023)
- B. CLIENT.SSL.CLIENT_CERT.DAYS_TO_EXPIRE.EQ(2023)
- C. CLIENT.SSL.ORIGIN_SERVER_CERT.VALID_NOT_AFTER.EQ(GMT2023)
- D. CLIENT.SSL.CLIENT_CERT.VALID_NOT_BEFORE.EQ(GMT2023)
Answer: A
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/ssl/ssl-actions-and-policies/config-built-in- ssl-actions.html
NEW QUESTION 33
......
How to Prepare for Citrix 1Y0-241: Deploy and Manage Citrix ADC 13 with Traffic Management Exam
Preparation Guide for Citrix 1Y0-241: Deploy and Manage Citrix ADC 13 with Traffic Management Exam
Introduction
Citrix Systems, Inc. is a US organization that offers virtualization, networking, cloud computing infrastructure, cloud, application, laptop, and software as a service (SaaS). The business was founded by Ed Iacobucci in 1989 and was president until his retirement in 2000. Citrix goods are supposed to be used by over 400,000 customers globally, including 99 percent of the Fortune 100 and 98 percent of the Fortune 500. The business has been working with the organization throughout its existence and has initiated designing remote access products for Microsoft operating systems and licensing Microsoft sources. Citrix became a pioneer in customer applications by the 1990s and enabled personalized software to reach remote servers and services. The first public offering was introduced in 1995 and the business witnessed significant sales rise with few rivals from 1995 to 1999.
This exam preparation guide is designed to provide candidates with necessary information about the Citrix 1Y0-241 exam test, including Citrix 1Y0-241, dumps and ways to interpret the exam objectives to better enable candidates to assess the types of questions that may be asked during the exam with the help of Citrix 1Y0-241 practice exams. Please be aware that the content of this guide in no way ensures a passing score on the certification exam.
Real Citrix 1Y0-241 Exam Questions [Updated 2021]: https://www.braindumpspass.com/Citrix/1Y0-241-practice-exam-dumps.html
Free 1Y0-241 Exam Dumps to Pass Exam Easily: https://drive.google.com/open?id=1BtEqJDjIuv8CsdsZRS9te0qT9hiIuzlb
