[Oct-2021] Aruba Certified Switching Associate (ACSA) V1 HPE6-A72 Exam Practice Dumps
2021 HPE6-A72 Premium Files Test pdf - Free Dumps Collection
NEW QUESTION 48
Place the OSI Layers in the correct order. Arrange them from least to greatest, starting with Layer 1 on the top, and progressing to Layer 7 on the bottom.
Answer:
Explanation:
1 - physical Layer
2 - Data Link Layer
3 - Network Layer
4 - Transport Layer
5 - Session Layer
6 - Presentation Layer
7 - Application Layer
NEW QUESTION 49
Refer to the exhibit.
What configuration is needed in order for "show LLDP configuration" to show this output?
- A. enabling LLDP on the interfaces only
- B. configuring LLDP both globally and on the interfaces
- C. configuring LLDP globally only
- D. none; LLDP is enabled by default on Aruba switches
Answer: D
NEW QUESTION 50
Refer to the exhibit
What is true regarding VLAN 50 according to the diagram above?
- A. VLAN 50 is part of a switched virtual interface (SVI) that was never routed causing it to be down.
- B. Since VLAN 50 has not been assigned to any enabled physical port, the status is down.
- C. VLAN 50 was never added to the vlan-database and therefore is in a down state.
- D. VLAN 50 is assigned only to Trunk ports which is why no ports are listed under interfaces.
Answer: B
NEW QUESTION 51
Match each description to the correct management tool for Aruba AOS-CX.
Answer:
Explanation:
NEW QUESTION 52
Which two options are the Layer 2 protocols? (Choose two.)
- A. STP
- B. 802.11af
- C. IPSec
- D. RIP
- E. 802.1Q
Answer: A,E
NEW QUESTION 53
With what other technology does Half Duplex communication closely match?
- A. CB radio using push-to-talk
- B. point-to-point connections between two switches allowing concurrent transmit and receive
- C. a pair of fiber optic strands allowing transmit on one and receive on the other at the same time
- D. a mobile phone call
Answer: A
NEW QUESTION 54
What are the commands to disable SSH and HTTPS services from the default VRF?
- A. Core-1(config)# no ssh server vrf default Core-1(config)# no https-server vrf default
- B. Core-1# no ssh server vrf default Core-1# no https-server vrf default
- C. Core-1(config)# no ssh server Core-1(config)# no https-server
- D. Core-1(config)# no ssh server enable Core-1(config)# no https-server enable
Answer: A
NEW QUESTION 55
Refer to the exhibit.
The command show LLDP neighbor-info gets typed into Access-1. All switches are Aruba OS-CX switches. What is the output of this command?
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: B
NEW QUESTION 56
Match the switching term to the correct definition.
Answer:
Explanation:
NEW QUESTION 57
Click on the colored box that corresponds with the line that best represents Broadcast traffic flow.
Answer:
Explanation:
NEW QUESTION 58
Refer to the exhibit.
The above scenario shows a packet from the Server destined for the Firewall. Switch-A and Switch-B are bundled as VSF stack. The LAG between the VSF stack and the firewall indicates a hash function to forward the packet on port 2/1/2.
Which statement is true regarding how Switch-A will forward the packet?
- A. Switch-A will encapsulate the packet using GRE to forward to Switch-B in order for the packet to egress on port 2/1/2 per the hash function.
- B. Switch-A will forward the packet along the VSF link to Switch-B so that it will egress on port 2/1/2 per the hash function.
- C. Switch-A will drop the packet. Multi-Chassis lag to multi-chassis lag is not a supported feature of VSF.
- D. Switch-A will forward the packet on port 1/1/2. VSF will override the typical LAG hash function used for the physical interface selection.
Answer: B
NEW QUESTION 59
Refer to the exhibit.
The above command was applied to an Aruba AOS-CX 6300M 24-port switch with 4-port SFP56 uplinks. All ports are set as access switchports.
Which ports carry VLAN 1 traffic?
- A. 1/1/8-1/1/10, 1/1/5-1/1/28
- B. 1/1/1-1/1/24
- C. 1/1/1-1/1/28
- D. 1/1/8, 1/1/10, 1/1/5-1/1/24
Answer: A
NEW QUESTION 60
Refer to the exhibit.
All switches are running Aruba OS-CX. While working in the terminal of Access-2, you are unable to reach Server-1 using SSH.
What is the correct command to ping Server-1 from Access-2 to test reachability?
- A. Access-2# ping 172.16.1.97
- B. Access-2# ping 172.16.1.97 vrf mgmt
- C. Access-2# ping6 172.16.1.97 vrf mgmt.
- D. Access-2# ping 172.16.1.97 vrf default
Answer: B
NEW QUESTION 61
Refer to the exhibit.
What command (output shown above) gives the optics serial number and part number information?
- A. show inventory
- B. show interface transceiver
- C. show interface optics
- D. show interface physical
Answer: B
NEW QUESTION 62
Refer to the exhibit.
The above scenario shows a packet from the Server destined for the Firewall. Switch-A and Switch-B are bundled as VSF stack. The LAG between the VSF stack and the firewall indicates a hash function to forward the packet on port 2/1/2.
Which statement is true regarding how Switch-A will forward the packet?
- A. Switch-A will encapsulate the packet using GRE to forward to Switch-B in order for the packet to egress on port 2/1/2 per the hash function.
- B. Switch-A will forward the packet along the VSF link to Switch-B so that it will egress on port 2/1/2 per the hash function.
- C. Switch-A will drop the packet. Multi-Chassis lag to multi-chassis lag is not a supported feature of VSF.
- D. Switch-A will forward the packet on port 1/1/2. VSF will override the typical LAG hash function used for the physical interface selection.
Answer: B
NEW QUESTION 63
Refer to the exhibit.
The above output is the result of issuing the command show system resource-utilization.
What command should be used to enable terminal output line by line or page by page?
- A. The command terminal length 30
- B. The command page
- C. The command less
- D. The command more
Answer: B
NEW QUESTION 64
Match each network protocol to the correct server listening port. Not all answers will be used.
Answer:
Explanation:
NEW QUESTION 65
What command displays information regarding the secondary image installed on an AOS-CX switch?
- A. show images
- B. show version detail
- C. show secondary
- D. show version
Answer: A
NEW QUESTION 66
Match the available stacking feature to the correct AOS-CX switch model. Stacking features may be used more than once.
Answer:
Explanation:
NEW QUESTION 67
What is a benefit of choosing a 3-Tier design with routing at the Aggregation layer?
- A. Connecting WAN/MPLS and Data center access to the Aggregation layer
- B. Shifting endpoint access to the Aggregation layer from the Access layer
- C. Better Core router performance by offloading processing
- D. Using access control lists (ACLs) at the Core to improve performance
Answer: C
NEW QUESTION 68
What is the login and password combination is used when first configuring an Aruba OS-CX switch from factory defaults?
- A. Login admin and password password.
- B. Login admin and password forgetme!
- C. Login admin and password admin.
- D. Login admin and password field empty.
Answer: D
NEW QUESTION 69
Which two statements accurately describe stacking with Aruba switches? (Choose two.)
- A. A VSF stack is allowed between an AOS-CX 6300M and 6300F switches.
- B. VSF and VSX are stacking option with the AOS-CX 8320. 8325. 8400. and 6400 models.
- C. A VSF stack is allowed between an AOS 5400R and an AOS-CX 6400.
- D. The VSF feature is not compatible between AOS-CX and AOS platforms.
- E. VSF is a core or aggregation layer stacking technology due to the high resiliency of sharing a single control plane.
Answer: B,E
NEW QUESTION 70
......
Get ready to pass the HPE6-A72 Exam right now using our Aruba Certified Switching Associate (ACSA) V1 Exam Package: https://www.braindumpspass.com/HP/HPE6-A72-practice-exam-dumps.html
A fully updated 2021 HPE6-A72 Exam Dumps exam guide from training expert BraindumpsPass: https://drive.google.com/open?id=1IXDxxLrBGMd1TEzSmNvQlH29FiXECHVa
