[Nov 28, 2023] 100% Pass Guarantee for 350-801 Dumps with Actual Exam Questions
Today Updated 350-801 Exam Dumps Actual Questions
Cisco 350-801 Exam Topics:
| Section | Weight | Objectives |
|---|---|---|
| Collaboration Applications | 10% | 1.Configure Cisco Unity Connection mailbox and MWI 2.Configure Cisco Unity Connection SIP integration options to call control 3.Describe Cisco Unity Connection call handlers 4.Describe Cisco Unified IM&P protocols and deployment
5.Deploy Cisco Jabber on premises |
| QoS | 10% | 1.Describe problems that can lead to poor voice and video quality
2.Describe the QoS requirements for these application types (voice and video)
4.Describe the purpose and function of these DiffServ values as it pertains to collaboration
5.Describe QoS trust boundaries and their significance in LAN-based classification and marking |
| Infrastructure and Design | 20% | 1. Describe the key design elements of the following, pertaining to the Cisco Collaboration architecture as described in the SRND/PA
2.Describe the purpose of Edge devices in the Cisco Collaboration architecture such as Expressway and Cisco Unified Border Element
4.Troubleshoot these network components in a Cisco Collaboration solution
5.Explain these components to support Cisco Collaboration solutions
|
| Call Control | 25% | 1.Describe the Cisco Unified Communications Manager digit analysis process 2.Implement toll fraud prevention on Cisco Unified CM 3.Configure globalized call routing in Cisco Unified CM
4.Describe Mobile and Remote Access (MRA) |
Understanding functional and technical aspects of Implementing Cisco Collaboration Core Technologies (350-801 CLCOR) Protocols, codecs, and endpoints
The following will be discussed in CISCO 350-801 exam dumps:
- Configure and troubleshoot Cisco Unity Connection call handlers
- Enabling Cisco Jabber
- Define QoS and its models
- Exploring Codecs
- Self provisioning
- Exploring Call Signaling over IP Networks
- Implementing Cisco Unified Communications Manager Provisioning Features
- Troubleshoot collaboration endpoints
- Describing Cisco Instant Messaging and Presence
- Implementing and Troubleshooting Media Resources in Cisco Unified Communications Manager
- Bulk Administration Tool (BAT)
- Describing Dial Plans and Endpoint Addressing
- Implementing Toll Fraud Prevention
- Analyze traffic patterns and quality issues in converged IP networks supporting voice, video, and data traffic
- Identify the appropriate collaboration codecs for a given scenario
- SDP
- Implementing Globalized Call Routing
- Call set up and tear down
- Configure codec negotiations
- Manual
- Deploy SIP endpoints
- Configure classification and marking options on Cisco Catalyst switches
- Integrating Cisco Unified Communications Manager LDAP
- Implementing MGCP Gateways
- Troubleshoot these elements of a SIP conversation
- Configuring Calling Privileges in Cisco Unified Communications Manager
- Describe how Mobile Remote Access (MRA) is used to allow endpoints to work from outside the company
- DTMF
- Implement classification and marking
NEW QUESTION # 162
Which settings are needed to configure the SIP route pattern in Cisco Unified Communications Manager?
- A. Pattern usage, IPv4 pattern, and SIP trunk/Route list
- B. Pattern usage, IPv6 pattern, and SIP trunk/Route list
- C. SIP trunk/Route list, description, and IPv4 pattern
- D. Pattern usage, IPv4 pattern, IPv6 pattern, and description
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmcfg/CUCM_BK_ C95ABA82_00_admin-guide-100/CUCM_BK_C95ABA82_00_admin-guide-
100_chapter_0100111.pdf
NEW QUESTION # 163
Refer to the exhibit.
Refer to the exhibit. A customer submits this debug output, captured on a Cisco IOS router. Assuming that an MGCP gateway is configured with an ISDN BRI interface, which BRI changes resolve the issue?
- A.
- B.
- C.
- D.
Answer: A
NEW QUESTION # 164
Refer to the exhibit. You deploy Mobile and Remote Access for Jabber and discover that Jabber for Windows does not register to cisco Unified Communications Manager while outside of the office. What is a cause of this issue?
- A. Server 4.2.2.2 is not a valid DNS server.
- B. The DNS record type should be changed from SRV to A.
- C. The DNS record should be created for _ cisco-uds _tcp example.com.
- D. The DNS record should be changed from _collab-edge._tcp.example.com to __collab-edge
_tls.example.com.
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_7/CJAB_BK_C606D8A
9_00_cisco-jabber-dns-configuration-guide/CJAB_BK_C606D8A9_00_cisco-jabber-dns- configuration-guide_chapter_010.html
NEW QUESTION # 165 
Refer to the exhibit. Given this "debug isdn q921" output, what is the problem with the PRI?
- A. Layer 1 is down on the controller.
- B. PRI does not have an IP address configured on the interface.
- C. Nothing, the PRI is sending keepalives.
- D. Layer 2 is down on the controller.
Answer: D
Explanation:
Section: Cisco IOS XE Gateway and Media Resources
NEW QUESTION # 166
Refer to the exhibit.
The SOP offer/answer has been completed successfully but there is no DTMF when users press keys. What is the cause of the issue?
- A. G.729 rather than G.711ulaw was negotiated.
- B. DTMF was negotiated properly in these messages.
- C. DTMF was not negotiated on the call.
- D. Payload type 110 was negotiated rather than type 101.
Answer: C
NEW QUESTION # 167
Refer to the exhibit.
The translation rule is configured on the voice gateway to translate DNIS. What is the outcome if the gateway receives 0255-343-1234 as DNIS?
- A. The translation rule is matched and the translated number is 025553431234.
- B. The translation rule is matched and the translated number is 02553431234.
- C. The translation rule is not matched because DNIS does not end with a "$".
- D. The translation rule is not matched because DNIS contains "-".
Answer: B
NEW QUESTION # 168
A user dials 9011841234567 to reach Vietnam. Which steps send the call to the PSTN provider as
011841234567?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: A
NEW QUESTION # 169
An engineer configures Cisco Unified Communications Manager to prevent toll fraud.
At which two point does the engineer block the pattern in Cisco Unified CM to complete this task?
(Choose two.)
- A. translation pattern
- B. CSS
- C. route group
- D. partition
- E. route pattern
Answer: A,E
Explanation:
If we focus on patterns only, both translation pattern & route pattern have the ability to check box (block this pattern).
NEW QUESTION # 170
Refer to the exhibit. Which codec should an engineer select for a call mode between "Dallas- REG" & "Austin-REG"?
- A. MP4A-LATM
- B. G.729
- C. OPUS
- D. G.711
Answer: B
NEW QUESTION # 171
Refer to the exhibit.
Refer to the exhibit. A customer wants the SIP 200 OK shown to advertise codecs in the following order:
After correcting the codec preferences. What should the audio payload show in the SIP Traces?
- A. Option B
- B. Option A
- C. Option D
- D. Option C
Answer: C
NEW QUESTION # 172
A Cisco UCM administrator wants to enable the Self-Provisioning feature for end users.
Which two prerequisites must be met first? (Choose two.)
- A. End users must have a primary extension.
- B. End users must be associated to a user profile or feature group template that includes a universal line template and universal device template.
- C. Cisco Extended Functions service must be running
- D. End users must have a secondary extension.
- E. End users must belong to Standard CCM Admin Users group, the Standard CCM End Users group, and the Standard CCM Self-Provisioning group.
Answer: A,B
NEW QUESTION # 173
An engineer is configuring IP telephony. The network relies on DHCP to provide TFTP server addresses to the endpoints. Policy requires the endpoints to receive two server addresses. Which DHCP option must be configured?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
Option 66 provides a single TFTP server address. Option 150 provides a list of TFTP server addresses. Also if both are configured, Cisco phones will target 150 by default before 66.
NEW QUESTION # 174
Refer to the exhibit.
Which outgoing m-line SDP is sent to Cisco UCM after matching the appropriate dial peers via Cisco Unified Border Element?
A)
B)
C)
D)
- A. Option
- B. Option
- C. Option
- D. Option
Answer: B
NEW QUESTION # 175
An administrator is developing an 8-class QoS baseline model. The CS3 standards-based marking recommendation is used for which type of class?
- A. best effort
- B. Scavenger
- C. voice
- D. call signaling
Answer: B
NEW QUESTION # 176
Refer to the exhibit.
When a UC Administrator is troubleshooting DTMF negotiated by this SIP INVITE, which two messages should be examined next to further troubleshoot the issue? (Choose two.)
- A. SUBSCRIBE
- B. NOTIFY
- C. PRACK
- D. UPDATE
- E. REGISTER
Answer: A,B
NEW QUESTION # 177
An administrator must make a pattern to route calls to two different destinations john doe@company com and jane doe@company com.
Which type of patterns are needed in the Cisco UCM, and what must the pattern look like?
- A. A SIP route pattern that looks like this: *@company.com
- B. A SIP route pattern that looks like this: company.com
- C. A regular route pattern with the URI feature enabled in the configuration page.
The pattern must look like this: MATCH(*[email protected]) - D. A regular route pattern with the URI feature enabled in the configuration page.
The pattern must look like this: (*@company.com)
Answer: D
NEW QUESTION # 178
Refer to the exhibit. The SDP offer/answer has been completed successfully but there is no DTMF when users press keys. What is the cause of the issue?
- A. G.729 rather than G.711ulaw was negotiated.
- B. DTMF was negotiated property in these messages.
- C. DTMF was not negotiated on the call.
- D. Payload type 110 was negotiated rather than type 101.
Answer: C
NEW QUESTION # 179
Which statement describes the outcome when the trust boundary is defined at the Cisco IP phone?
- A. Packets of Ethernet frames are not remarked at the access layer switch.
- B. Packets or Ethernet frames are not remarked by the IP phone.
- C. Packets of Ethernet frames are remarked at the access layer switch.
- D. Packets or Ethernet frames are remarked at the distribution layer switch.
Answer: A
Explanation:
In the picture above the trust boundary is at the Cisco IP phone, this means that we won't remark any packets or Ethernet frames anymore at the access layer switch.
https://networklessons.com/quality-of-service/how-to-configure-qos-trust-boundary-on-cisco- switches
NEW QUESTION # 180
An engineer must enable onboarding of on-premises devices by using activation to a Cisco UCM server The engineer activated the CISCO Device Activation Service and set the default registration method to use the codes. Which action completes the configuration?
- A. Create a Bulk Administration Tool provisioning template.
- B. Generate 16-digit codes by using the Bilk Administration Tool
- C. Manually provision new phones that have an activation code requirement
- D. Set Enable Activation Code enterprise parameter to True-
Answer: D
Explanation:
The engineer must set the Enable Activation Code enterprise parameter to True. This will enable the use of activation codes for onboarding on-premises devices to a Cisco UCM server. The other options are not necessary to complete the configuration.
Here are the steps to complete the configuration:
Log in to the Cisco Unified Communications Manager (CUCM) Administration interface.
Go to System > Enterprise Parameters.
Set the Enable Activation Code enterprise parameter to True.
Click Save.
The activation code onboarding feature is now enabled. You can use it to onboard new phones to the CUCM server.
NEW QUESTION # 181 
Refer to the exhibit A user takes a phone from San Francisco to New York for a short reassignment. The phone was set up to use the San Francisco device pool, and device mobility is enabled on the Cisco UCM. The user makes a call that matches a route pattern in a route list that contains the Standard Local Route Group. To where does the call retreat?
- A. The call egresses in San Francisco because the user uses device mobility and is allowed to roam while still keeping the number and resources assigned in San Francisco
- B. The call fails because device mobility is turned on. and the phone is not configured in New York The engineer must configure which sites the device should be roaming to
- C. The call egresses in New York because the device automatically is assigned a New York device pool and uses the local gateway
- D. The call fails because the Standard Local Route Group is being used only if no configuration is set for the device pools
Answer: A
NEW QUESTION # 182
Which type of greeting in the Call Handler configuration in Cisco Unity Connection overrides all other greetings?
- A. priority
- B. supervisory
- C. alternate
- D. holidays
Answer: C
Explanation:
Alternate
Can be used for a variety of special situations, such as vacations or a leave. An alternate greeting overrides all other greetings.
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/administration/guide/10xc ucsagx/10xcucsag080.html
NEW QUESTION # 183
An engineer implements a new Cisco UCM based telephony system per these requirements:
- The local Ethernet bandwidth is sized based on the total bandwidth
per call
- A G.736 codec is used.
- The bit rate is 64 kbps
- The codec sample interval is 10 ms.
- The voice payload size is 160 bytes per 20 ms.
What should the size of the Ethernet bandwidth be per call?
- A. 38.4 kbps
- B. 87.2 kbps
- C. 31.2 kbps
- D. 55.2 kbps
Answer: B
Explanation:
All details match with G711 protocol, for which the calculation is :
(160+(40+18))/160 x 64 =87.2 kbps
https://www.cisco.com/c/en/us/support/docs/voice/voice-quality/7934-bwidth-consume.html Codec Information Bandwidth Calculations Codec & Bit Rate (Kbps) Codec Sample Size (Bytes) Codec Sample Interval (ms) Mean Opinion Score (MOS) Voice Payload Size (Bytes) Voice Payload Size (ms) Packets Per Second (PPS) Bandwidth MP or FRF.12 (Kbps) Bandwidth w/cRTP MP or FRF.12 (Kbps) Bandwidth Ethernet (Kbps)
G.711 (64 Kbps) 80 Bytes 10 ms 4.1 160 Bytes 20 ms 50 82.8 Kbps 67.6 Kbps 87.2 Kbp
NEW QUESTION # 184
An engineer is going to redesign a network, and while looking at the QoS configuration, the engineer sees that a portion of the network is marked with AF42.
Which type of traffic is marked with this tag?
- A. video conference
- B. voice
- C. streaming video
- D. signaling
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Collaboration/hybrid/12x/hybcvd/bwm.html
NEW QUESTION # 185
Given this H.323 gateway configuration and using Cisco best practices, how must the called party transformation pattern be configured to ensure that a proper ISDN type of number is set?
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION # 186
......
350-801 exam dumps with real Cisco questions and answers: https://www.braindumpspass.com/Cisco/350-801-practice-exam-dumps.html
350-801 Exam in First Attempt Guaranteed: https://drive.google.com/open?id=178A-D_wZ4MHP5niprsMrb3dVp37YGQRC
