[May 03, 2024] 100% Pass Guarantee for 5V0-35.21 Dumps with Actual Exam Questions
Today Updated 5V0-35.21 Exam Dumps Actual Questions
VMware 5V0-35.21 certification exam is intended for professionals who have experience working with VMware vRealize Operations and want to demonstrate their expertise in this area. 5V0-35.21 exam is ideal for system administrators, IT managers, and other professionals who are responsible for managing virtualized environments. VMware vRealize Operations Specialist certification is also a valuable credential for individuals who are looking to advance their careers in the field of virtualization and cloud computing.
VMware vRealize Operations is a powerful tool that provides comprehensive monitoring, performance management, and capacity planning for virtualized environments. It helps IT professionals to optimize resource utilization, reduce downtime, and enhance the overall performance of their virtual infrastructure. Anyone who wants to become a VMware vRealize Operations Specialist should take 5V0-35.21 exam.
NEW QUESTION # 22
An administrator has been tasked with configuring vRealize Operations cost drivers to assign a different cost per GB for different storage tiers.
Which steps should the administrator complete to meet this objective?
- A. Create a custom group in vRealize Operations for each of the storage tiers, and then assign a cost per GB to each custom group.
- B. Assign different costs per GB to each of the storage types discovered by vRealize Operations.
- C. Use a vSphere tag category, assign different tag values for that category to the different tiers in the vSphere client, and then assign different costs per GB for each tag value.
- D. Use a vRealize Operations tag with different tag values manually configured for each datastore or datastore cluster object on the Inventory page, and then assign a cost per GB for each tag value.
Answer: C
Explanation:
To configure vRealize Operations cost drivers to assign a different cost per GB for different storage tiers, the administrator should use a vSphere tag category, assign different tag values for that category to the different tiers in the vSphere client, and then assign different costs per GB for each tag value. This is because vRealize Operations uses vSphere tags to identify the storage tiers and apply the corresponding cost drivers. vSphere tags are metadata that can be attached to objects in the vSphere inventory, such as datastores, clusters, hosts, VMs, etc. A vSphere tag category is a logical grouping of tags that share a common characteristic, such as storage tier, license type, backup policy, etc. A vSphere tag value is a specific label within a category that can be assigned to one or more objects, such as Tier 1, Tier 2, Tier 3, etc. By using a vSphere tag category and tag values for storage tiers, the administrator can easily classify the datastores into different tiers based on their performance, availability, or other criteria. Then, the administrator can assign different costs per GB for each tag value in vRealize Operations, which will reflect the different storagebase rates for each tier. This way, the administrator can achieve a granular and accurate cost visibility and analysis for the storage resources in vRealize Operations. References: Overview of Cost Drivers; VM Cost with VMware vRealize Operations; Using Tags to Organize Your Inventory
NEW QUESTION # 23
An administrator has configured Service Discovery within vRealize Operations. Service Discovery has successfully discovered services on all of the Windows Virtual Machines, but all of the Linux Virtual Machines are reporting the Authentication status as "VM authentication status is failed".
Which two issues could produce this type of response? (Choose two.)
- A. Endpoint Operations agent is not installed on the Linux virtual machines.
- B. The version of VMware Tools needs to be upgraded.
- C. The required network ports are not opened on the Linux virtual machines.
- D. Telegraf agent is not installed on the Linux virtual machines.
- E. The open-vm-tools-sdmg package is not enabled on the Linux virtual machines.
Answer: D,E
Explanation:
According to the VMware vRealize Operations Reference Materials, Service Discovery is a feature that allows you to automatically discover and monitor the services running on your virtual machines. Service Discovery can use two methods: credential-based and credential-less. Credential-based Service Discovery requires you to provide guest credentials for each virtual machine, while credential-less Service Discovery uses VMware Tools to run scripts on the guest operating system without requiring credentials.
For Linux virtual machines, credential-less Service Discovery requires the installation of Telegraf agent, which is a data collection and reporting agent that communicates with VMware Tools. If the Telegraf agent is not installed on the Linux virtual machines, Service Discovery will fail to authenticate and collect data from them. Therefore, option A is correct.
Another requirement for Linux virtual machines is to enable the open-vm-tools-sdmg package, which is a service discovery management pack that allows VMware Tools to runscripts for Service Discovery. If the open-vm-tools-sdmg package is not enabled on the Linux virtual machines, Service Discovery will also fail to authenticate and collect data from them. Therefore, option D is correct.
The other options are not correct because they are not related to the authentication status of Service Discovery.
Option B is not correct because the required network ports are not specific to Linux virtual machines, and they are only needed for credential-based Service Discovery. Option C is not correct because the version of VMware Tools does not affect the authentication status of Service Discovery, as long as it supports the credential-less method. Option E is not correct because the Endpoint Operations agent is not required for Service Discovery, and it is used for a different purpose of collecting metrics and properties from the guest operating system and applications. References:
Service Discovery Overview
Credential-Less Service Discovery with vRealize Operations
Install Telegraf Agent on Linux Virtual Machines
[Enable open-vm-tools-sdmg Package on Linux Virtual Machines]
NEW QUESTION # 24
Which two pricing card types are available in vRealize Operations? (Choose two.)
- A. Static-based
- B. Allocation-based
- C. Rate-based
- D. Cost-based
- E. Demand-based
Answer: C,D
Explanation:
vRealize Operations provides two types of pricing cards, cost-based and rate-based, to calculate the price associated with your virtual infrastructure. You can assign pricing cards to vCenters or Clusters, depending on the pricing strategy determined by vRealize Operations administrator. The pricing cards help you to set the price for each resource present in your virtual environment. You can customize the pricing card as per your requirement.
Cost-based pricing card: A cost-based pricing card calculates the price based on the cost of the resources defined in vRealize Operations. You can specify a multiplication factor for each resource type, such as CPU, memory, storage, etc., to adjust the price according to your business needs. The price equation using cost is: <cost> x <multiplication factor> = Price Rate-based pricing card: A rate-based pricing card calculates the price based on the rate of the resources defined by you. You can specify a rate for each resource type, such as CPU, memory, storage, etc., in terms of units, such as MHz, GB, etc. You can also specify the charging period and the power state for each resource type.The price equation using rate is: <rate> x <usage> = Price References: Pricing Overview; Add New Pricing Card
NEW QUESTION # 25
Which Grouping Option in vRealize Operations allows the configuration of Tiers?
- A. Applications
- B. Custom Datacenter
- C. Tags
- D. Cloud Zones
Answer: A
NEW QUESTION # 26
Which two additional parameters are taken into account when sizing a vRealize Operations cluster using the sizing tool? (Choose two.)
- A. Node size
- B. Number of current users
- C. Time Series Data Retention
- D. Number of nodes
- E. Projected Growth
Answer: C,E
NEW QUESTION # 27
For the past 12 hours, a vRealize Operations Cluster has exhibited erratic behavior, and the remote collectors appear to be the cause. The administrator has contacted VMware support, and they have requested all relevant logs.
Because of bandwidth constraints, the customer will only be able to send the minimum amount of information to VMware support.
Which support bundle should the customer send that fits these constraints?
- A. Light-support bundle from the Primary nodes only
- B. Full-support bundle from all nodes
- C. Light-support bundle from all nodes
- D. Full-support bundle from the Primary nodes only
Answer: A
NEW QUESTION # 28
Which step is required before a Super Metric's data collection may begin?
- A. Enable in Objects
- B. Enable in Policy
- C. Enable in Alerts
- D. Enable in Object Types
Answer: D
NEW QUESTION # 29
An administrator is using the troubleshooting workbench in vRealize Operations for troubleshooting purposes.
Which other vRealize Suite product's data will be shown in this view when the integration is configured?
- A. vRealize Log Insight
- B. vRealize Automation
- C. vRealize Network Insight
- D. vRealize AI Cloud
Answer: C
Explanation:
The troubleshooting workbench is a feature of vRealize Operations that provides a unified and interactive view of the alerts, metrics, events, and logs related to an object or a problem in your environment. You can use the troubleshooting workbench to quickly identify the root cause of an issue, analyze the impact and symptoms, and take corrective actions12.
The troubleshooting workbench can show the data from other vRealize Suite products when the integration is configured. The integration enables vRealize Operations to collect and display the data from the other products as additional sources of information and context for troubleshooting purposes. The integration also enables vRealize Operations to launch the other products from the troubleshooting workbench to perform further analysis or actions34.
The other vRealize Suite product that can show its data in the troubleshooting workbench when the integration is configured is vRealize Network Insight. vRealize Network Insight is a product that provides visibility and analytics for network and security across physical, virtual, and cloud environments. It helps you to plan, operate, troubleshoot, and optimize your network and security infrastructure, as well as ensure compliance and security posture56.
When vRealize Operations is integrated with vRealize Network Insight, you can see the network and security data from vRealize Network Insight in the troubleshooting workbench. For example, you can see the network flows, firewall rules, network paths, and network health of the objects or problems that you are troubleshooting. You can also launch vRealize Network Insight from the troubleshooting workbench to perform deeper network and security analysis or actions .
References:
1: Troubleshooting Workbench - VMware Docs 2: Use the Troubleshooting Workbench 3: Integrate vRealize Operations with Other Products - VMware Docs 4: Launch Other Products from vRealize Operations Manager 5: vRealize Network Insight - VMware 6: vRealize Network Insight User Guide : [vRealize Network Insight Integration - VMware Docs] : [Use vRealize Network Insight Data in vRealize Operations Manager] :
[vRealize Operations Manager User Guide] : [vRealize Operations Manager Installation and Configuration Guide] : [vRealize Operations Manager Concepts Guide] : [vRealize Operations Manager Administration Guide] : [vRealize Operations Manager Customization and Extensibility Guide] : [vRealize Operations Manager Troubleshooting Guide] : [vRealize Operations Manager API Programming Guide] : [vRealize Operations Manager Certification Exam Guide]
NEW QUESTION # 30
An administrator needs to manage a vRealize Operations cluster using the Admin UI.
Which two actions are possible? (Choose two.)
- A. Configuring a DNS server on the vRealize Operations nodes
- B. Activating a vRealize Operations native management pack
- C. Deploying a new vRealize Operations node OVA
- D. Uploading and installing vRealize Operations PAK files
- E. Enabling or disabling high availability for the vRealize Operations cluster
Answer: D,E
Explanation:
The two actions that are possible to manage a vRealize Operations cluster using the Admin UI are uploading and installing vRealize Operations PAK files, and enabling or disabling high availability for the vRealize Operations cluster.
Uploading and installing vRealize Operations PAK files is an action that allows the administrator to update the vRealize Operations software, add new features, or install management packs1.
Enabling or disabling high availability for the vRealize Operations cluster is an action that allows the administrator to configure the cluster to tolerate the failure of one or more nodes, and to ensure the continuity and availability of the vRealize Operations services2.
Deploying a new vRealize Operations node OVA (option A) is not an action that can be performed using the Admin UI, as it requires the use of the vSphere Client or the vSphere Web Client to deploy the OVA file to the vCenter Server3.
Activating a vRealize Operations native management pack (option C) is not an action that can be performed using the Admin UI, as it requires the use of the vRealize Operations Manager UI to access the Solutions page and activate the management pack4.
Configuring a DNS server on the vRealize Operations nodes (option E) is not an action that can be performed using the Admin UI, as it requires the use of the command-line interface (CLI) to access the node settings and configure the DNS server5.
References:
1: VMware vRealize Operations Specialist Exam 2023 (5V0-35.21) Exam Guide, VMware, 2021, p. 11.
2: VMware vRealize Operations Specialist Exam 2023 (5V0-35.21) Exam Guide, VMware, 2021, p. 12.
3: vRealize Operations Manager Installation and Configuration Guide, VMware, 2021, p. 17.
4: vRealize Operations Manager Installation and Configuration Guide, VMware, 2021, p. 31.
5: vRealize Operations Manager Installation and Configuration Guide, VMware, 2021, p. 25.
NEW QUESTION # 31
An administrator has been tasked with configuring vRealize Operations to ensure that workload performance across the VMware SDDC is the main priority. In the event of an issue, remediation activities should be automatically completed to minimize any impact to running workloads. A maximum of 10% cluster resources should be reserved for burst capacity.
Which option should the administrator configure to meet these requirements?
- A. Rightsizing
- B. Reclamation
- C. Operational Intent
- D. Business Intent
Answer: D
NEW QUESTION # 32
A trainee system administrator has been tasked with expanding an existing vRealize Operations Manager cluster by adding an additional node. A senior administrator allows the trainee system administrator to complete the task without providing unnecessary administrator credentials.
How did the senior administrator take this action?
- A. By asking the trainee administrator to generate a one-time passphrase to authenticate into the vRealize Operations Manager administration interface and then adding a new node into the cluster.
- B. By directing the trainee administrator to clone an existing vRealize Operations Manager data node and then adding it into the cluster.
- C. By utilizing the Reload Nodes option from the vRealize Operations Manager administration interface to add a new node into the existing cluster.
- D. By using the generate passphrase option from the vRealize Operations Manager administration interface and having the trainee administrator add a new node into the existing cluster.
Answer: D
Explanation:
The generate passphrase option allows the vRealize Operations administrator to create a one-time passphrase that can be used instead of the administrator credentials to add a node to the cluster. This option is useful when the administrator wants to delegate the task of adding a node to another user without exposing the administrator password. The passphrase is valid for 24 hours and can be used only once. The trainee administrator can use the passphrase to authenticate into the vRealize Operations Manager administration interface and then select the Expand an Existing Installation option to add a new node intothe cluster1. References: 1: Expand an Existing Installation to Add a Data Node
NEW QUESTION # 33
When Workload Planning is performed, it returns that an existing cluster does not have the capacity to accommodate the selected virtual machines.
Which alternative is offered by default?
- A. Cost comparisons for running in hybrid/private/public cloud
- B. Cost options for increasing cluster capacity with additional hosts
- C. Modifications to host configurations
- D. Modifications to virtual machine configuration
Answer: B
NEW QUESTION # 34
A customer has a requirement to assign different vRealize Operations policy to a particular set of objects.
Which option will help the customer satisfy this requirement?
- A. Custom Datacenter
- B. Tags
- C. Applications
- D. Custom Groups
Answer: D
Explanation:
Custom groups are collections of objects that you define based on criteria that you specify. You can use custom groups to assign different vRealize Operations policies to a particular set of objects that share common characteristics or belong to a specific business unit1. Custom groups allow you to override the default policy settings for the objects in the group and apply a different policy that suits your requirements2. For example, you can create a custom group of ESXi clusters that run database servers and assign a different capacity policy to them than the rest of the clusters in your environment2. References: = 1 Managing Custom Object Groups in vRealize Operations - VMware Docs, 2 Policies - VMware Docs
NEW QUESTION # 35
An administrator discovered a problem in the virtual infrastructure and obtained instructions that would resolve the triggered alert.
Which alert component was used by the administrator?
- A. Reclamation
- B. Symptom
- C. Recommendation
- D. Threshold
Answer: C
NEW QUESTION # 36
An administrator wants to enable a custom metric configuration file to a scoreboard widget in a dashboard, but after configuring it, the scoreboard does not show the new metrics at all.
Which scoreboard widget configuration option possibly caused this problem?
- A. Refresh content set to On
- B. Refresh content set to Off
- C. Self Provider set to On
- D. Self Provider set to Off
Answer: C
Explanation:
The scoreboard widget configuration option that possibly caused this problem is Self Provider set to On. The Self Provider option determines whether the widget shows metrics of the objects selected during editing of the widget or selected on another widget. When the Self Provider option is set to On, the widget shows metrics of the objects selected during editing of the widget. When the Self Provider option is set to Off, the widget shows metrics of the objects selected on another widget. Therefore, if the administrator wants to enable a custom metric configuration file to a scoreboard widget in a dashboard, and the custom metrics are defined for a specific object type, the administrator should set the Self Provider option to Off and select the appropriate object type on another widget. Otherwise, the scoreboard widget will not show the new metrics at all, because the custom metric configuration file will not match the object type selected during editing of the widget. References: How the Scoreboard Widget and Configuration Options Work; Solved: How to configure Generic Scoreboard widget to interact with...
NEW QUESTION # 37
An active policy has been enabled with this alert definition:
"Virtual machine CPU usage is at 100% for an extended period of time."
This is causing alerts to be triggered frequently by test/development VMs, so the administrator would like to exclude alerts triggered by the test/development VMs, but not other VMs.
Which action would help achieve this goal?
- A. On the Environment tab, select all test/development VMs, and then unassign the active policy that is currently assigned to the test/development VM.
- B. Under Alerts, select Alerts Definitions, and then set the alert definition to "Disabled" for test/development VMs.
- C. Create a policy inherited from the current active policy, set the alert definition state to "Disabled", and then assign to test/development VMs.
- D. Under Alerts, select Alerts Definitions, and then remove the Symptoms Definition.
Answer: C
Explanation:
The action that would help achieve the goal of excluding alerts triggered by the test/development VMs, but not other VMs, is to create a policy inherited from the current active policy, set the alert definition state to
"Disabled", and then assign to test/development VMs. A policy is a set of configuration settings that define the behavior and appearance of vRealize Operations for the objects to which it is applied1. A policy can be inherited from another policy, and it can override or customize the settings of the parent policy2. An alert definition is a configuration that defines the conditions and actions for generating analert3. An alert definition can be enabled or disabled in a policy, and it can be assigned to specific object types or groups4. By creating a policy inherited from the current active policy, the administrator can preserve the existing settings for the other VMs, and only modify the alert definition state for the test/development VMs. By setting the alert definition state to "Disabled", the administrator can prevent the alert from being triggered by the test/development VMs, and avoid the unnecessary noise and notifications. By assigning the policy to the test/development VMs, the administrator can apply the customized settings to the desired objects, and ensure the policy precedence and inheritance. Under Alerts, select Alerts Definitions, and then remove the Symptoms Definition (option B) is not a correct action, as it would affect the alert definition for all the VMs, not just the test/development VMs, and it would also remove the ability to detect the CPU usage issue for the other VMs. On the Environment tab, select all test/development VMs, and then unassign the active policy that is currently assigned to the test/development VM (option C) is not a correct action, as it would not disable the alert definition for the test/development VMs, but rather assign them the default policy, which may have different settings and alert definitions than the current active policy. Under Alerts, select Alerts Definitions, and then set the alert definition to "Disabled" for test/development VMs (option D) is not a correct action, as it would not create a separate policy for the test/development VMs, but rather modify the current active policy, which may affect the other VMs that are using the same policy. References:
1: vRealize Operations Manager User Guide, VMware, 2021, p. 51.
2: vRealize Operations Manager User Guide, VMware, 2021, p. 52.
3: vRealize Operations Manager User Guide, VMware, 2021, p. 93.
4: vRealize Operations Manager User Guide, VMware, 2021, p. 94.
[5]: vRealize Operations Manager User Guide, VMware, 2021, p. 55.
NEW QUESTION # 38
An administrator has deployed a vRealize Operations (vROps) cluster in a Continuous Availability configuration across the two racks in two fault domains. Following a network outage that occurred for several minutes, the administrator has been tasked to ensure that the vROps deployment is still healthy. They have noted that one cluster can still contact the witness node.
Which two events will occur as a result of the outage? (Choose two.)
- A. Both fault domains will be offline.
- B. The administrator will need to bring the other fault domain online manually.
- C. The vROps cluster will bring the fault domain back automatically once the network has been restored.
- D. One fault domain will go offline.
- E. The administrator will need to restart and resync the vROps cluster.
Answer: C,D
Explanation:
A vROps cluster in a Continuous Availability configuration consists of two fault domains, which are separate physical locations that can tolerate failures of an entire rack or site. The fault domains contain the primary node, the primary replica node, and the data nodes that store and replicate the data and configuration of the cluster. The witness node is deployed in a third location to monitor the network connectivity between the two fault domains and prevent split-brain scenarios, which occur when both fault domains assume the role of the master node due to network isolation1.
When a network outage occurs between the two fault domains, the witness node detects the situation and makes one of the fault domains offline to avoid data inconsistency. The fault domain that can still contact the witness node remains online and continues to function as the master node. The fault domain that cannot contact the witness node goes offline and stops serving requests. The VMs on the offline fault domain are restarted on the online fault domain by the vSphere HA feature1.
When the network outage is resolved and the connectivity between the two fault domains is restored, the vROps cluster will bring the offline fault domain back automatically. The offline fault domain will resync the data and configuration from the online fault domain and resume its normal operations. The administrator does not need to bring the offline fault domain online manually or restart and resync the vROps cluster1.
Therefore, the two events that will occur as a result of the outage are A.
The vROps cluster will bring the fault domain back automatically once the network has been restored and D.
One fault domain will go offline.
References: 1: About vRealize Operations Continuous Availability
NEW QUESTION # 39
An administrator is asked to onboard an on-premises vCenter instance into an existing vRealize Operations Cloud instance.
Which two steps are needed to accomplish this goal? (Choose two.)
- A. Deploy and configure a Primary node.
- B. Deploy and configure a Data node.
- C. Deploy and configure a cloud proxy.
- D. Add a vRealize Operations Cloud account.
- E. Add a vCenter cloud account.
Answer: C,E
NEW QUESTION # 40
An administrator has been tasked with creating a custom view that displays information about specific virtual machine objects in a tabular format.
Which type of view should the administrator create?
- A. Distribution
- B. List
- C. Trend
- D. Text
Answer: B
Explanation:
A list view displays information about specific objects in a tabular format. You can select the object type, the metrics or properties to display, and the sorting and filtering options for the table. A list view is useful for comparing data across multiple objects or for exporting data to a CSV file. References:
Create and Configure a View
[List View]
NEW QUESTION # 41
An administrator is importing an Active Directory group with a role, and group members can login into vRealize Operations successfully. After a while, the administrator adds some new users into Active Directory group and is covers that newly added group members are not seen under User Accounts section and cannot login into vRealize Operations. Everything is working as expected for the old group members.
The administrator needs to take further steps to allow the newly added group members to login quickly into vRealize Operations.
Which two steps should the administrator take? (Choose two.)
- A. Delete the existing Authentication Source.
- B. Synchronize the User Groups.
- C. Re-add the Authentication Source.
- D. Add a SAML IdP as Authentication Source, and select source type as SSO SAML.
- E. Check if Automatically synchronize user membership for configured groups is selected.
Answer: B,E
Explanation:
To allow the newly added group members to login quickly into vRealize Operations, the administrator needs to synchronize the user groups from the Active Directory source and check if the automatic synchronization option is enabled. Synchronizing the user groups imports the latest user group information from the source to vRealize Operations. Checking the automatic synchronization option ensures that the user group membership is updated periodically without manual intervention. Re-adding or deleting the authentication source are not necessary steps, as they would disrupt the existing user access control. Adding a SAML IdP as authentication source is not relevant, as the question is about Active Directory groups. References: Import User Groups From Source, Export and Import of User Groups, Synchronize the Active Directory Groups for VMware Aria Operations in Workspace ONE Access
NEW QUESTION # 42
An administrator has enabled the allocation model in a policy and set the CPU overcommit ratio to 4:1 for all vSphere clusters in a vSphere datacenter.
Why would vRealize Operations report that the cluster has 0 days remaining when the actual CPU overcommit ratio is less than the 4:1 configured value?
- A. The CPU demand in the cluster is greater than the total CPU capacity.
- B. The allocation model does not account for powered off virtual machines.
- C. The CPU demand in the cluster is less than the total CPU capacity.
- D. The allocation model will always report zero remaining capacity when the actual ratio is less than the configured ratio.
Answer: A
Explanation:
The reason why vRealize Operations reports that the cluster has 0 days remaining when the actual CPU overcommit ratio is less than the 4:1 configured value is that the CPU demand in the cluster is greater than the total CPU capacity. The allocation model is a method of calculating the capacity and utilization of resources based on the amount of resources that are allocated to the objects, such as virtual machines, clusters, or datastores. The allocation model allows the administrator to set the overcommit ratio for CPU, memory, or disk space, which is the ratio of the allocated resources to the available resources. The overcommit ratio determines how much the resources can be overcommitted without affecting the performance or availability of the objects1.
When the administrator enables the allocation model in a policy and sets the CPU overcommit ratio to 4:1 for all vSphere clusters in a vSphere datacenter, it means that the administrator allows the CPU resources to be allocated four times more than the availableCPU resources in the clusters. For example, if a cluster has 100 GHz of CPU capacity, the administrator can allocate up to 400 GHz of CPU resources to the virtual machines in the cluster. However, this does not mean that the virtual machines can consume up to 400 GHz of CPU resources without any impact. The actual CPU consumption of the virtual machines depends on the CPU demand, which is the amount of CPU resources that the virtual machines require to run their workloads. The CPU demand can vary depending on the workload type, intensity, and pattern2.
If the CPU demand in the cluster is greater than the total CPU capacity, it means that the virtual machines are requesting more CPU resources than the cluster can provide. This can result in CPU contention, performance degradation, and SLA violations. In this case, vRealize Operations reports that the cluster has 0 days remaining, which means that the cluster has reached its maximum capacity and cannot accommodate any more CPU demand. The cluster has 0 days remaining even if the actual CPU overcommit ratio is less than the 4:1 configured value, because the overcommit ratio only reflects the allocated resources, not the consumed resources. The overcommit ratio does not guarantee that the cluster can support the CPU demand of the virtual machines, but only indicates the potential capacity of the cluster based on the allocation model1.
References: 1: Allocation Model - VMware Docs 2: Demand Model - VMware Docs
NEW QUESTION # 43
An architect is designing a monitoring solution for a VMware SDDC, using vRealize OperationsManager (vROps). One of the key requirements is that the solution must ensure that no monitoring data is lost in the event of a whole rack failure.
Which option will address this company's needs?
- A. Deploy vROpj. using a High Availability configuration.
- B. Deploy vROps with a Continuous Availability configuration.
- C. Deploy an additional vROps deployment as a standby.
- D. Deploy and configure remote collector groups.
Answer: B
Explanation:
Continuous Availability (CA) is a feature of vROps that separates the analytics cluster into two fault domains, stretching across vSphere clusters, and protects the analytics cluster against the loss of an entire fault domain.
CA requires a witness node to be deployed in the cluster, which acts as a tiebreaker in case of a network partition between the two fault domains. CA ensures that the data stored in the primary node and data nodes in one fault domain is always 100% synced to the replica node and data nodes in the other fault domain. CA is not a disaster recovery solution, but it provides a higher level of availability and data protection than High Availability (HA), which only protects against the loss of a single node. HA creates a replica for the primary node, but does not replicate the data nodes. Therefore, if a whole rack fails, HA may not be able to prevent data loss. Deploying an additional vROps deployment as a standby or configuring remote collector groups are not options that address the requirement of ensuring no monitoring data is lost in the event of a whole rack failure. These options may provide some redundancy or scalability, but they do not guarantee data consistency or availability across fault domains. References: 1: About vRealize Operations Continuous Availability 2: Continuous Availability Considerations 3: About vRealize Operations High Availability 4: High Availability Considerations
NEW QUESTION # 44
What is the correct process to add a custom metric configuration file to a scoreboard widget in a dashboard?
- A. 1. Create a metric file in XML format.
2. Set the scoreboard widget Self Provider to On.
3. Create a widget interaction with a receiving widget. - B. 1. Create a metric file in XML format.
2. Set the scoreboard widget Self Provider to Off.
3. Create a widget interaction with a provider widget. - C. 1. Create a metric file in XML format.
2. Set the scoreboard widget Self Provider to Off.
3. Create a widget interaction with a receiving widget. - D. 1. Create a metric file in XML format.
2. Set the scoreboard widget Self Provider to On.
3. Create a widget interaction with a provider widget.
Answer: B
Explanation:
To add a custom metric configuration file to a scoreboard widget in a dashboard, the correct process is to create a metric file in XML format, set the scoreboard widget Self Provider to Off, and create a widget interaction with a provider widget. A custom metric configuration file is a file that defines the metrics that the scoreboard widget displays for different object types. The file must be in XML format and follow a specific schema. The file must be uploaded to the vRealize Operations server and selected in the Metric Configuration option of the scoreboard widget. The Self Provider option determines whether the widget shows metrics of the objects selected during editing of the widget or selected on another widget. When the Self Provider option is set to Off, the widget shows metrics of the objects selected on another widget. The widget interaction is a mechanism that allows widgets to communicate with each other and pass data. A provider widget is a widget that provides data to another widget. A receiving widget is a widget that receives data from another widget. To create a widget interaction, the administrator must edit the dashboard and select the provider widget and the receiving widget, and then configure the interaction type and the data to pass. By creating a widget interaction with a provider widget, the administrator can enable the scoreboard widget to display the custom metrics for the objects selected on the provider widget. References: How the Scoreboard Widget and Configuration Options Work; Question on How to Scoreboard Dashboard - Metric Configuration XML - Max & Avg Metric Values; Dashboard widget can set default metric key
NEW QUESTION # 45
An administrator has deployed a vRealize Operations (vROps) cluster in a Continuous Availability configuration across the two racks in two fault domains. Following a network outage that occurred for several minutes, the administrator has been tasked to ensure that the vROps deployment is still healthy. They have noted that one cluster can still contact the witness node.
Which two events will occur as a result of the outage? (Choose two.)
- A. Both fault domains will be offline.
- B. The administrator will need to bring the other fault domain online manually.
- C. The vROps cluster will bring the fault domain back automatically once the network has been restored.
- D. One fault domain will go offline.
- E. The administrator will need to restart and resync the vROps cluster.
Answer: C,D
NEW QUESTION # 46
Users have reported several application VMs are performing very slowly. The system administrator was requested to find out the source of the problem on both VMs and/or ESXi hosts level. vRealize Operations has not been configured with Application Remote Collector.
Which action will help the administrator to quickly identify the underlying problem?
- A. Under Inventory, select Manage Agent, then select the VMs, and run Remote Checks on ICMP, HTTP checks.
- B. Under Administration, choose Configuration, select Object Relationships, and then identify the VMs and ESXi hosts relationship to generate a correlation of the metric, and finally, isolate theissue.
- C. Under Dashboard, choose the out-of-the-box Performance dashboards that displays contention on both VMs and ESXi hosts.
- D. Under Report, use Configuration Report - Virtual Machines to list down possible changes that have occurred.
Answer: C
Explanation:
According to the vRealize Operations User Guide1, one of the best ways to quickly identify the underlying problem of slow application VMs is to use the out-of-the-box Performance dashboards that display contention on both VMs and ESXi hosts. These dashboards show the key performance indicators (KPIs) of CPU, memory, disk, and network for the selected objects, and highlight any contention or saturation issues that may affect the performance. The administrator can use these dashboards to drill down into the details of the metrics, alerts, events, and properties of the objects, and isolate the root cause of the problem. The other options are not correct because:
Under Inventory, selecting Manage Agent, then selecting the VMs, and running Remote Checks on ICMP, HTTP checks is not a helpful action, as it only verifies the connectivity and availability of the VMs, but does not provide any information about the performance or contention of the VMs or the ESXi hosts2.
Under Report, using Configuration Report - Virtual Machines to list down possible changes that have occurred is not a helpful action, as it only shows the configuration details of the VMs, such as name, UUID, power state, guest OS, CPU, memory, disk, and network, but does not show any performance or contention metrics or alerts of the VMs or the ESXi hosts3.
Under Administration, choosing Configuration, selecting Object Relationships, and then identifying the VMs and ESXi hosts relationship to generate a correlation of the metric, and finally, isolate the issue is not a helpful action, as it only shows the hierarchical and logical relationships between the objects, such as parent, child, sibling, and peer, but does not show any performance or contention metrics or alerts of the objects4. References: 1: vRealize Operations User Guide, pages 57-59, 62-632: vRealize Operations User Guide, pages 69-703: vRealize Operations User Guide, pages 81-824: vRealize Operations User Guide, pages 84-85.
NEW QUESTION # 47
......
VMware 5V0-35.21 exam is designed to test an individual's understanding of vRealize Operations and its various components. 5V0-35.21 exam covers topics such as performance and capacity management, troubleshooting, customization, and integration with other VMware products. 5V0-35.21 exam is intended for IT professionals who are responsible for managing and optimizing VMware vSphere environments using vRealize Operations.
5V0-35.21 exam dumps with real VMware questions and answers: https://www.braindumpspass.com/VMware/5V0-35.21-practice-exam-dumps.html
5V0-35.21 Exam in First Attempt Guaranteed: https://drive.google.com/open?id=1hwwcpCPrSS6GQwU2BGJ4ojDI7JwDsaIw
