Free 300-410 Exam Files Verified & Correct Answers Downloaded Instantly
Instant Download 300-410 Dumps Q&As Provide PDF&Test Engine
What's Next After Cisco ENARSI?
Once you have passed the Cisco ENARSI 300-410 exam, assuming you have already passed the core 350-401 ENCOR test, and have been awarded the prestigious CCNP Enterprise certification, you get new prospects for professional improvement. Earning this certificate automatically earns you the right to boast about it on social media platforms such as LinkedIn to attract more and more job offers with high paying salaries. CCNP Enterprise is valid for a total of 3 years, after which recertification should be done by keeping up with educational activities offered by Cisco or completing exams. Finally, one can also opt for expert-level certifications such as CCIE Enterprise Infrastructure or CCIE Enterprise Wireless. Each of them requires applicants to only pass one extra lab exam.
NEW QUESTION # 97
Which protocol does MPLS use to support traffic engineering?
- A. Label Distribution Protocol (LDP)
- B. Border Gateway Protocol (BGP)
- C. Resource Reservation Protocol (RSVP)
- D. Tag Distribution Protocol (TDP)
Answer: C
Explanation:
NEW QUESTION # 98
Drag and drop the MPLS terms from the left onto the correct definitions on the right.
Answer:
Explanation:
NEW QUESTION # 99 
Refer to the exhibit. Users on a call center report that they cannot browse the internet on Saturdays during the afternoon. Which configuration resolves the issue?
- A.
- B.
- C.
- D.
Answer: C
NEW QUESTION # 100
Refer to the exhibit.
An error message "an OSPF-4-FLOOD_WAR" is received on SW2 from SW1. SW2 is repeatedly receiving its own link-state advertisement and flushes it from the network. Which action resolves the issue?
- A. Resolve duplicate IP address issue in the network
- B. Resolve different subnet mask issue on the link
- C. Configure Layer 3 port channel on interfaces between switches
- D. Change area 5 to a normal area from a nonstub area
Answer: A
NEW QUESTION # 101
Drag and drop the ICMPv6 neighbor discovery messages from the left onto the correct packet types on the right.
Answer:
Explanation:
NEW QUESTION # 102
Refer to the exhibit.
The administrator can see the traps for the failed login attempts, but cannot see the traps of successful login attempts. What command is needed to resolve the issue?
- A. Configure logging history 4
- B. Configure logging history 3
- C. Configure logging history 5
- D. Configure logging history 2
Answer: C
Explanation:
Explanation
By default, the maximum severity sent as a syslog trap is warning. That is why you see syslog traps for login failures. Since a login success is severity 5 (notifications), those syslog messages will not be converted to traps. To fix this, configure:
Note:
The syntax of login block is:
login block-for seconds attempts tries within seconds
NEW QUESTION # 103
Refer to the exhibit.
A junior engineer updated a branch router configuration. Immediately after the change, the engineer receives calls from the help desk that branch personnel cannot reach any network destinations. Which configuration restores service and continues to block 10.1.1.100/32?
- A. route-map FILTER-IN deny 5
- B. ip prefix-list 102 seq 15 permit 0.0.0.0/32 le 32
- C. ip prefix-list 102 seq 5 permit 0.0.0.0/32 le 32
- D. route-map FILTER-IN permit 20
Answer: C
NEW QUESTION # 104
Refer to the exhibit.
An engineer is trying to generate a summary route in OSPF for network 10.0.0.0/8, but the summary route does not show up in the routing table. Why is the summary route missing?
- A. There is no route for a subnet inside 10.0.0.0/8, sp the summary route is not generated.
- B. The summary route is not visible on this router, but it is visible on other OSPF routers in the same area.
- C. The summary-address command is used only for summary prefixes between areas.
- D. The summary route is visible only in the OSPF database not in the routing table.
Answer: A
NEW QUESTION # 105 
Refer to the exhibit A network administrator is troubleshooting to reduce the routing table of R4 and R5 to learn only the default route to communicate from Inter-Area and Intra-Area networks Which configuration resolves the issue?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION # 106
Drag and drop the MPLS concepts from the left onto the descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 107
An engineer must configure a Cisco router to initiate secure connections from the router to other devices in the network but kept failing. Which two actions resolve the issue? (Choose two.)
- A. Configure a crypto key to be generated
- B. Configure a TACACS+ server and enable it
- C. Configure transport input ssh command on the console
- D. Configure a domain name
- E. Configure a source port for the SSH connection to initiate
Answer: A,D
Explanation:
Explanation
Follow these guidelines when configuring the switch as an SSH server or SSH client:
+ An RSA key pair generated by a SSHv1 server can be used by an SSHv2 server, and the reverse.+ If the SSH server is running on a stack master and the stack master fails, the new stack master uses the RSA key pair generated by the previous stack master
+ If you get CLI error messages after entering the crypto key generate rsa global configuration command, an RSA key pair has not been generated. Reconfigure thehostname and domain, and then enter the crypto key generate rsa command.+ When generating the RSA key pair, the message No host name specified might appear. If it does, you must configure a hostname by using the hostname globalconfiguration command.+ When generating the RSA key pair, the message No domain specified might appear. If it does, you must configure an IP domain name by using the ip domain-nameglobal configuration command.+ When configuring the local authentication and authorization authentication method, make sure that AAA is disabled on the console.
NEW QUESTION # 108
Refer to the exhibit. R1 and R2 cannot establish an EIGRP adjacency. Which action establishes EIGRP adjacency?
- A. Remove the passive-interface command from the R2 configuration so that it matches the R1 configuration.
- B. Remove the current autonomous system number on one of the routers and change to a different value.
- C. Add the no auto-summary command to the R2 configuration so that it matches the R1 configuration.
- D. Add the passive-interface command to the R1 configuration so that it matches the R2 configuration.
Answer: A
NEW QUESTION # 109
Refer to the exhibit.
BGP and EIGRP are mutually redistributed on R3, and EIGRP and OSPF are mutually redistributed on R1. Users report packet loss and interruption of service to applications hosted on the 10.1.1.0724 prefix. An engineer tested the link from R3 to R4 with no packet loss present but has noticed frequent routing changes on R3 when running the debug ip route command. Which action stabilizes the service?
- A. Place an OSPF distribute-list outbound on R3 to block the 10.1.10/24 prefix from being advertised back to R3.
- B. Tag the 10.1.1.0/24 prefix and deny the prefix from being redistributed into OSPF on R1.
- C. Reduce frequent OSPF SPF calculations on R3 that cause a high CPU and packet loss on traffic traversing R3.
- D. Repeat the test from R4 using ICMP ping on the local 10.1.1.0/24 prefix, and fix any Layer 2 errors on the host or switch side of the subnet.
Answer: B
Explanation:
After redistribution, R3 learns about network 10.1.1.0/24 via two paths:
+ Internal BGP (IBGP): advertised from R4 with AD of 200 (and metric of 0)
+ OSPF: advertised from R1 with AD of 110 (O E2) (and metric of 20)
Therefore R3 will choose the path with the lower AD via OSPF
But this is a looped path which is received from R3 -> R2 -> R1 -> R3. So when the advertised route from R4 is expired, the looped path is also expired soon and R3 will reinstall the main path from R4.
This is the cause of intermittent connectivity.
We can solve this problem by denying the 10.1.1.0/24 prefix from being redistributed into OSPF on R1. So R3 will not learn this prefix from R1.
Or another solution is to place an OSPF distribute-list inbound on R3 to block the 10.1.1.0/24 prefix from being advertised back to R3.
NEW QUESTION # 110
Refer to the exhibit.
- A. access-list 20 permit 10.221.10.12
- B. snmp-server group NETVIEW v2c priv read NETVIEW access 20
- C. access-list 20 permit 10.221.10.11
- D. snmp-server group NETADMIN v3 priv read NETVIEW write NETADMIN access 22
Answer: C
NEW QUESTION # 111
Refer to the exhibit.
A network administrator logs into the router using TACACS+ username and password credentials, but the administrator cannot run any privileged commands Which action resolves the issue?
- A. Configure an authorized IP address for this user to access this router
- B. Configure TACACS+ synchronization with the Active Directory admin group
- C. Configure the username from a local database
- D. Configure full access for the username from TACACS+ server
Answer: D
NEW QUESTION # 112
Refer to Exhibit.
A network administrator added one router in the Cisco DNA Center and checked its discovery and health from the Network Health Dashboard. The network administrator observed that the router is still showing up as unmonitored. What must be configured on the router to mount it in the Cisco DNA Center?
- A. Configure router with SNMPv2c or SNMPv3 traps
- B. Configure router with routing to reach Cisco DNA Center
- C. Configure router with the telemetry data
- D. Configure router with NetFlow data
Answer: C
Explanation:
Explanation
Unmonitored: Unmonitored devices are devices for which Assurance did not receive any telemetry data during the specified time range.
NEW QUESTION # 113
......
Cisco 300-410: Implementing Cisco Enterprise Advanced Routing and Services (ENARSI) exam is a certification designed for network professionals who want to develop their skills in implementing advanced routing and services technologies. Implementing Cisco Enterprise Advanced Routing and Services certification is aimed at individuals who have already gained basic knowledge in networking, and are now looking to take their career to the next level by expanding their expertise in the field.
Exam Valid Dumps with Instant Download Free Updates: https://www.braindumpspass.com/Cisco/300-410-practice-exam-dumps.html
Fast Exam Updates 300-410 dumps with PDF Test Engine Practice: https://drive.google.com/open?id=1AITuALf24KkZ_hIKlvOXl8asD9QoewUu
