EMC Exam 2024 DEA-5TT2 Dumps Updated Questions UPDATED Feb-2024
Get The Most Updated DEA-5TT2 Dumps To DCA-Networking Certification
Passing the EMC DEA-5TT2 certification exam is a great way for networking professionals to demonstrate their skills and expertise in the field of enterprise networking. Associate - Networking Exam certification is highly valued by employers and can help candidates advance their careers. It is also a great way for candidates to stay up-to-date with the latest networking technologies and best practices. Overall, the DEA-5TT2 certification exam is an excellent choice for networking professionals who want to validate their skills and take their careers to the next level.
NEW QUESTION # 10
On Switch A, a static route has been redistributed into OSPF. Which type of OSPF router will this process make Switch A?
- A. Backbone Router (BR)
- B. Area Border Router (ABR)
- C. Autonomous System Boundary Router (ASBR)
- D. Designated router (DR)
Answer: C
NEW QUESTION # 11
Which topology is considered a best practice when stacking switches?
- A. Ring
- B. Daisy-chain
- C. Cascade
- D. Serial
Answer: A
NEW QUESTION # 12
Which Dell EMC Networking M-Series 10 GbE switch model supports a VLT?
- A. M6220
- B. M6348
- C. M8024-K
- D. MXL
Answer: D
NEW QUESTION # 13
Router A is directly connected to Router B over an Ethernet link. The local interface address for the Router A Fo0/48 interface is 144.254.32.2/24. Which routing table entry is visible on Router A?
- A. 144.254.32.0/24
- B. 144.254.0.0/24
- C. 144.254.0.0/16
- D. 144.254.32.2/24
Answer: A
NEW QUESTION # 14
What is the correct sequence of steps that occur in the communications between the client and server to obtain an IP address from a DHCP server?
Answer:
Explanation:
NEW QUESTION # 15
A network administrator has a stack of four Dell EMC Networking S4800 Series switches. Each stack unit is configured with a different priority. Which switch will be elected as the management device?
- A. Switch with priority 14
- B. Switch with priority 1
- C. Switch with priority 21
- D. Switch with priority 0
Answer: B
NEW QUESTION # 16
Which message is sent by a router when TTL expires?
- A. Echo request
- B. Echo reply
- C. Time exceeded
- D. Destination unreachable
Answer: C
NEW QUESTION # 17
Which port and protocol is used by NTP to communicate?
- A. TCP port 123 for both the source and destination
- B. TCP port 123 for the source and TCP port 80 for the destination
- C. UDP port 123 for the source and TCP port 80 for the destination
- D. UDP port 123 for both the source and destination
Answer: D
NEW QUESTION # 18
When configuring a switch, which CLI mode only supports limited show commands?
- A. EXEC Privilege
- B. EXEC
- C. Configuration
- D. Maintenance
Answer: B
NEW QUESTION # 19
A network administrator wants to use a subnet that will only have two host addresses. Which subnet mask meets this requirement?
- A. 255.255.255.256
- B. 255.255.255.252
- C. 255.255.255.254
- D. 255.255.255.248
Answer: B
NEW QUESTION # 20
On which Dell EMC Networking switches can Multi-Chassis Link Aggregation (MLAG) be configured?
- A. S-Series
- B. N-Series
- C. Z-Series
- D. C9000 Series
Answer: B
NEW QUESTION # 21
At which layer of the OSI model is the Rapid Spanning Tree protocol used to prevent switching loops?
- A. Transport
- B. Physical
- C. Network
- D. Data Link
Answer: D
NEW QUESTION # 22
What is the aggregated lanes' maximum speed rating for a QSFP28 transceiver?
- A. 4 Gbps
- B. 128 Gbps
- C. 40 Gbps
- D. 112 Gbps
Answer: D
NEW QUESTION # 23
What is the default OSPF "hello interval"?
- A. 10 seconds
- B. 15 seconds
- C. 5 seconds
- D. 30 seconds
Answer: A
NEW QUESTION # 24
A network administrator is troubleshooting an OSPF routing issue. There are two paths to a destination network from one switch. In addition, one path is comprised of four 1 Gb links. The other path is comprised of two 1 Gb and two 100 Mb links. The administrator ran several trace routes and notices that the packets are swapping back and forth between the two paths.
Which corrective action must be taken on the switch infrastructure to correct this issue?
- A. Manually specify the OSPF Router ID on each switch within the path.
- B. Switch all routing protocols to RIPv2.
- C. Change the reference speed used by OSPF in cost calculations on all switches within the path.
- D. Break the paths into multiple OSPF areas.
Answer: C
NEW QUESTION # 25
......
EMC Certified DEA-5TT2 Dumps Questions Valid DEA-5TT2 Materials: https://www.braindumpspass.com/EMC/DEA-5TT2-practice-exam-dumps.html
Current DEA-5TT2 Exam Dumps [2024] Complete EMC Exam Smoothly: https://drive.google.com/open?id=1VILFCiaew73QahAXtIAyrF7VgCi0qalf
