[Dec-2021] Cisco 352-001 Dumps - Secret To Pass in First Attempt
Cisco 352-001 Exam Dumps [2021] Practice Valid Exam Dumps Question
CCDE Design Written 352-001 Exam
CCDE Design Written 352-001 Exam is related to Cisco Certified Design Expert Design Certification. This exam validates the Candidate working knowledge to gather and clarify Network functional requirements, develop an implementation plan, develop network designs to meet functional specifications, convey design decisions and their rationale, and possess expert-level network infrastructure knowledge. It also tests the Candidate the ability to describe the effect of transport mechanisms and their interaction with routing protocols over different types of links and identify network application reporting requirements. Senior Network Engineers, Cisco Solution Architects, Network Design Engineers usually hold or pursue this certification and you can expect the same job role after completion of this certification.
Conclusion
So, if you want to build confidence in the evolving technologies that are salient for the CCDE 352-001 exam features, don’t miss out on the books and courses listed above. More than that, the information you’ll obtain from these materials is greatly adaptive to your tasks as a network professional.
NEW QUESTION 99 
Refer to the exhibit. A route health injector is deployed on the network to monitor reachable services. The route health injector injects /32 prefixes into BGP with the next hop of 98.18.0.2. These /32 prefixes are not being installed into the RIB of router. A which BGP feature must be deployed to make sure this design works?
- A. eBGP multihop attribute
- B. BGP community attributes
- C. BGP AS-path prepending
- D. MP-BGP
Answer: A
NEW QUESTION 100
At all sites provided in the following exhibit. OSPF is used as the PE-CE protocol Which path is preferred from CE1 to CE3?
- A. CE1-PE1-PE3-CE3
- B. CE1-PE1-PE2-CE3
- C. CE1-PE1-PE2-PE3-CE3
- D. CE1-PE1-CE2-PE2-PE3-CE3
Answer: A
Explanation:
Section: (none)
Explanation/Reference:
NEW QUESTION 101
You are a network administrator for the P4S company, study the exhibit carefully. You are responsible for this small EIGRP network and you want to change the primary path from P4S-R5 to 10.1.2.0/24 so it passes through P4S-R2. How to modify the EIGRP metrics to change the path in this way?
- A. increase the delay on the link between P4S-R5 and P4S-R3 to 25
- B. increase the delay on the link between P4S-R5 and P4S-R4 to 30; increase the delay on the link between P4S-R5 and P4S-R3 to
- C. increase the bandwidth on the link between P4S-R5 and P4S-R2 to 130; decrease the delay on the same link to 5
- D. decrease the bandwidth on the link between P4S-R5 and P4S-R4 to 90; increase the delay on the same link to 25
Answer: B
Explanation:
Section: (none)
Explanation/Reference:
NEW QUESTION 102
Which two OSPF network types can be used in the design of a hub tunnel interface for a phase 3 DMVPN that requires spoke-to-spoke direct traffic? (Choose two)
- A. broadcast
- B. point-to-multipoint nonbroadcast
- C. point-to-multipoint
- D. point-to-point
- E. nonbroadcast
Answer: A,C
NEW QUESTION 103
When adding an IPSec headend termination device to your network design, which two performance indicators are the most accurate to determine device scalability? (Choose two.)
- A. maximum tunnel termination capabilities
- B. CPU capabilities
- C. packets per second capabilities
- D. bandwidth capabilities
Answer: A,C
Explanation:
Explanation/Reference:
42
NEW QUESTION 104
Refer to the exhibit. The operations team has identified that some of the multi-tiered e-commerce applications have slow performance, due to illegitimate inbound traffic from the Internet. On which network device do you place traffic filtering to improve performance?
- A. B
- B. D
- C. A
- D. C
Answer: A
NEW QUESTION 105
A network has several routers running IS-IS L1L2 mode on the same Ethernet segment. Which action reduces to a minimum the number of IS-IS adjacencies in this segment?
- A. Make the interface priority on the backup DIS lower than the primary DIS
- B. Define only the router on the segment to be DIS
- C. Change half the routers to be L1-only and other half to be L2-only on this segment
- D. Change all routers connected to this segment to a single-level area
Answer: D
NEW QUESTION 106
Refer to the exhibit.
What limitations exist in this design, given that the access layer devices are expected to steadily increase by two devices per week for the next year?
- A. serviceability
- B. scalability
- C. redundancy
- D. resiliency
Answer: B
Explanation:
Explanation/Reference:
Explanation:
59
NEW QUESTION 107
Which restriction prevents a designer from using a GDOI-based VPN to secure traffic that traverses the Internet?
- A. Network address translation functions interfere with tunnel header preservation.
- B. The use of public addresses is not supported with GDOI.
- C. Enterprise host IP addresses are typically not routable.
- D. GDOI is less secure than traditional IPsec.
Answer: A
NEW QUESTION 108
The Internet Group Management Protocol (IGMP) is a
communications protocol used to manage the membership of Internet Protocol multicast groups. IGMP is used by IP hosts and adjacent multicast routers to establish multicast group memberships .What is the purpose of IGMP in a multicast implementation?
- A. it is used on WAN connections to determine the maximum bandwidth of a connection
- B. it is not used in multicast
- C. it is used in multicast
- D. it dynamically registers individual hosts in a multicast group on a specific LAN
Answer: D
Explanation:
Section: (none)
Explanation/Reference:
NEW QUESTION 109
Which two actions are performed at the distribution layer of the three-layer hierarchical network design model?
- A. fault isolation
- B. fast transport
- C. QoS classification and marking boundary
- D. reliability
- E. redundancy and load balancing
Answer: D,E
Explanation:
Section: Evolving Technologies
NEW QUESTION 110
Which three techniques can be used to improve fault isolation in an enterprise network design? (Choose three.)
- A. aggregate routing information on an OSPF ABR
- B. Equal-Cost Multipath routing
- C. multiple IS-IS flooding domains
- D. EIGRP query boundaries
- E. fully meshed distribution layer
- F. tuned Spanning Tree Protocol timers
Answer: A,C,D
NEW QUESTION 111
Refer to the exhibit.
Company A is running a single-area OSPF, and Company B is running RIP as the IGP with no overlapping IP address spaces. Company A has just acquired Company B and both networks must be merged. Which three design components are recommended to guarantee connectivity and redundancy between the two networks? (Choose three.)
- A. Enable mutual redistribution between OSPF and RIP on one border router.
- B.
- C. Implement an ACL on Router A and Router B to prevent OSPF external routes from being installed in the OSPF database.
- D. Increase the administrative distance to 130 for the OSPF external prefixes on Router A and Router
- E. Enable mutual redistribution between OSPF and RIP on Router A and Router B using route tags.
- F. Filter external routes on Router A and Router B based on route tags.
Answer: C,D,E
NEW QUESTION 112
A service provider hires you to design its new managed CE offering to meet these requirements:
* The CEs cannot run a routing protocol with the PE
* Provide the ability for equal or unequal ingress load balancing in dual-homed CE scenarios
* Provide support for IPv6 customer routes
* Scale up to 250,000 CE devices per customer
* Provide low operational management to scale customer growth
* Utilize low-end (inexpensive) routing platforms for CE functionality
Which tunneling technology do you recommend?
- A. DMVPN
- B. point-to-point GRE
- C. FlexVPN
- D. LISP
Answer: A
Explanation:
Section: Network Virtualization
Explanation/Reference:
NEW QUESTION 113
A BGP route reflector in the network is talking longer than expected to converge during network changes. Troubleshooting has shown that the router cannot handle all the TCP acknowledgements during route updates. Which action can be performed to tune device performance?
- A. Decrease the size of the small buffers
- B. Increase the keepalive timers for each BGP neighbor
- C. Increase the size of the hold queue
- D. Increase the size of the large buffers
Answer: C
NEW QUESTION 114 
Refer to the exhibit. The service provider ACME Internet just added a 100Gbps peering in Paris to use as the default for inbound traffic from Very Big ISP. Which routing policy achieves the desired outcome?
- A. Apply an export policy that only permits a default route in Brussels and Zurich
- B. Apply an export policy in New York and Tokyo that adds a Weight attribute to routes sent to Very Big ISP via Paris
- C. Apply an export policy in Pans by applying a MED or Community attribute with a preference M Very Big ISP ads upon
- D. Use traffic engineering by injecting a preferred LocalPref attribute to routes advertised to Very Big ISP in Paris
Answer: C
NEW QUESTION 115
Which two options are IoT use cases that require the low-latency and high reliability that 5G networks provide? (Choose two)
- A. Smart Home
- B. Automotive
- C. Sports and Fitness
- D. Smart Cities
- E. Health and wellness
- F. Industrial Automation
Answer: B,F
NEW QUESTION 116
A company plans to establish a new network using Cisco Catalyst switches for its multicast applications.
What is the disadvantage when two multicast applications are using the multicast IP addresses 234.17.4.5 and 234.145.4.5 inside the same network?
- A. Only one multicast stream is received at the port where the receivers from both applications are located.
- B. Multicast packets from both applications are flooded to all Layer 2 ports in a segment where a multicast receiver is located.
- C. Multicast packets from both applications are flooded to ports where one multicast receiver from one application is located.
- D. The routers doing PIM-SM cannot distinguish between the two multicast applications.
- E. Both multicast senders will always receive the multicast packets from the other multicast application.
Answer: C
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION 117
DRAG DROP
Answer:
Explanation:
NEW QUESTION 118
Which is design considerations of policy-based routing is true?
- A. It decreases failure detection time
- B. It can create microloops during network reconvergence
- C. It routes traffic destined to a set of users through different exit points
- D. It uses RSVP to differentiate traffic flows, so queuing mechanisms can prioritize them
Answer: B
NEW QUESTION 119
You are implementing a one-to-many multicast solution for a large service provider network. Which technology offers optimal routing of multicast traffic?
- A. Anycast Rp
- B. PIM SSM
- C. Bidirectional PIM
- D. PIM sparse mode
- E. MSDP
Answer: B
NEW QUESTION 120
A large enterprise network runs IS-IS. There is a concern that the IS-IS default metrics are not flexible enough Which IS-IS feature enables increased granularity for traffic engineering on the network?
- A. IS-IS route leaking
- B. IS-IS Multitopology
- C. i IS-IS DIS
- D. IS-IS Wide Metrics
Answer: D
NEW QUESTION 121
Which one of the following technologies allows a router to route traffic according to the size of the incoming packet?
- A. MTR
- B. PBR
- C. NBAR
- D. OSPF version 3
Answer: B
Explanation:
Section: (none)
Explanation/Reference:
NEW QUESTION 122
You are designing an 802.11 wireless network to include a controller as a central configuration point and access points across several remote sites. Which two aspects will manage the flow of the traffic to meet these design considerations? (Choose two.)
- A. The 802.1x authentication for a client associated to an AP on a locally switched WLAN is always handled at the wireless LAN controller side.
- B. The access point can receive multicast traffic in the form of multicast packets from the WLC.
- C. WLAN access lists can be applied only to centrally switched WLANs.
- D. Layer 3 roaming is not supported for locally switched WLANs.
- E. WLAN local switching with VLAN mapping requires that VLAN ID that is mapped on the AP to match a dynamic interface that is configured on the wireless LAN controller.
Answer: C,D
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION 123
Refer to the exhibit.
You are developing a migration plan to enable IPv6 in your IPv4 network. Starting at R3 and assuming default IS-IS operations, what is likely to happen when you enable IPv6 routing on the link from R3 to R2?
- A. R3 advertises the link from R3-R2 to R1, R4 and R5 only.
- B. Loopback reachability between all routers for IPv4 is lost.
- C. Only R3 and R2 have IPv4 and IPv6 reachability.
- D. R2 receives an IPv6 default route from R3.
- E. All routers except R2 are reachable through IPv4.
Answer: B
NEW QUESTION 124
......
How to study the 352-001 Exam
BraindumpsPass expert team recommends you to prepare some notes on these topics along with it don’t forget to practice Cisco 352-001 Exam dumps which been written by our expert team, Both these will help you a lot to clear this exam with good marks.
352-001 Exam Dumps PDF Guaranteed Success with Accurate & Updated Questions: https://www.braindumpspass.com/Cisco/352-001-practice-exam-dumps.html
