Authentic 200-301 Dumps With 100% Passing Rate Practice Tests Dumps
Cisco 200-301 Real Exam Questions Guaranteed Updated Dump from BraindumpsPass
To prepare for the Cisco 200-301 exam, candidates can opt for various training options, including instructor-led training, online training, and self-study. Cisco also provides study materials, including books, videos, and practice exams, to help candidates prepare for the exam. It is recommended that candidates have at least one year of networking experience before attempting the exam.
Basics of Network Access
Network access covers the concepts of VLAN configuration and verification, interswitch connectivity verification and configuration, the configuration and verification of Layer 2 discovery protocols, and Cisco wireless architectures. It also addresses the configuration of wireless LAN components, WLC, and AP management access connections, and physical infrastructure connections of WLAN components.
NEW QUESTION # 355
Drag and drop the IPv6 address type characteristics from the left to the right.
Answer:
Explanation:
NEW QUESTION # 356
Which keyword in a NAT configuration enables the use of one outside IP address for multiple inside hosts?
- A. pool
- B. static
- C. overload
- D. source
Answer: C
Explanation:
By adding the keyword "overload" at the end of a NAT statement, NAT becomes PAT (Port Address Translation). This is also a kind of dynamic NAT that maps multiple private IP addresses to a single public IP address (many-to-one) by using different ports. Static NAT and Dynamic NAT both require a one-to-one mapping from the inside local to the inside global address. By using PAT, you can have thousands of users connect to the Internet using only one real global IP address. PAT is the technology that helps us not run out of public IP address on the Internet. This is the most popular type of NAT.
An example of using "overload" keyword is shown below:
R1(config)# ip nat inside source list 1 interface ethernet1 overload
NEW QUESTION # 357
Drag and drop the SNMP components from the left onto the descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 358
Which goal is achieved by the implementation of private IPv4 addressing on a network?
- A. provides a reduction in size of the forwarding table on network routers
- B. allows servers and workstations to communicate across public network boundaries
- C. allows communication across the Internet to other private networks
- D. provides an added level of protection against Internet exposure
Answer: D
Explanation:
For private IPv4 to cross Public networks would require some form of tunneling. Private does not route publicly.
NEW QUESTION # 359
Refer to the exhibit.
Which command configures a floating static route to provide a backup to the primary link?
- A. ip route 209.165.200.224 255.255.255.224 209.165.202.129 254
- B. ip route 209.165.201.0 255.255.255.224 209.165.202.130
- C. ip route 0.0.0.0 0.0.0.0 209.165.200.224
- D. ip route 0.0.0.0 0.0.0.0 209.165.202.131
Answer: A
NEW QUESTION # 360
What happens when an 802.11a node broadcasts within the range of an 802.11g access point?
- A. The access point transmits, but the node is unable to receive.
- B. Both the node and the access point are unable to transmit.
- C. The node transmits, but the access point is unable to receive.
- D. A connection occurs
Answer: C
NEW QUESTION # 361
The SW1 interface g0/1 is in the down/down state. What are two reasons for the interface condition? (Choose two.)
- A. The interface is error-disabled
- B. The interface is shut down
- C. There is a speed mismatch
- D. There is a duplex mismatch
- E. There is a protocol mismatch
Answer: A,C
Explanation:
The interface is shut down - ADMIN DOWN / DOWN
The interface is error-disabled - DOWN / DOWN
There is a speed mismatch - DOWN / DOWN
NEW QUESTION # 362
Refer to the exhibit.
An engineer is configuring the router to provide static NAT for the webserver Drag and drop the configuration commands from the left onto the letters that correspond to its position in the configuration on the right.
Answer:
Explanation:
NEW QUESTION # 363
Drag and drop the DHCP snooping terms from the left onto the descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 364
Which spanning-tree enhancement avoids the learning and listening states and immediately places ports in the forwarding state?
- A. PortFast
- B. BPDUfilter
- C. BPDUguard
- D. Backbonefast
Answer: A
Explanation:
Explanation
PortFast
Spanning Tree Portfast causes layer 2 switch interfaces to enter forwarding state immediately, bypassing the listening and learning states. It should be used on ports connected directly to end hosts like servers or workstations. Note: If portfast isn't enabled, DHCP timeouts can occur while STP converges, causing more problems.
https://skminhaj.wordpress.com/2015/03/04/spanning-tree-stp-rstp-mst-enhancements/
NEW QUESTION # 365
Which two encoding methods are supported by REST APIs? (Choose two)
- A. JSON
- B. XML
- C. YAML
- D. EBCDIC
- E. SGML
Answer: A,B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/rest_cfg/2_1_x/b_Cisco_APIC_REST
NEW QUESTION # 366
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the VLANs. All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway. What is true about this configuration?
- A. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0 - B. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0 - C. No further routing configuration is required.
- D. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
Answer: C
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLA will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
NEW QUESTION # 367
Refer to the exhibit.
Which switch in this configuration will be elected as the root bridge?
- A. SW3
- B. SW4
- C. SW1
- D. SW2
Answer: C
NEW QUESTION # 368
Refer to the exhibit.
Which type of configuration is represented in the output?
- A. Chef
- B. Puppet
- C. Ansible
- D. JSON
Answer: C
NEW QUESTION # 369
Which action is taken by the data plane within a network device?
- A. provides CLI access to the network device
- B. forwards traffic to the next hop
- C. constructs a routing table based on a routing protocol
- D. looks up an egress interface in the forwarding information base
Answer: B
NEW QUESTION # 370
Drag and drop the AAA functions from the left onto the correct AAA services on the right
Answer:
Explanation:
NEW QUESTION # 371
Drag and drop the Cisco Wireless LAN Controller security settings from the left onto the correct security mechanism categories on the right.
Answer:
Explanation:
Explanation
NEW QUESTION # 372
Refer to the exhibit. How does the router manage traffic to 192.168.12.16?
- A. It chooses the EIGRP route because it has the lowest administrative distance
- B. It selects the RIP route because it has the longest prefix inclusive of the destination address.
- C. It chooses the OSPF route because it has the longest prefix inclusive of the destination address.
- D. it load-balances traffic between all three routes
Answer: B
NEW QUESTION # 373
Drag and drop the attack-mitigation techniques from the left onto the Types of attack that they mitigate on the right.
Answer:
Explanation:
NEW QUESTION # 374
Refer to the exhibit.
An engineer configured NAT translations and has verified that the configuration is correct.
Which IP address is the source IP?
- A. 172.23.103.10
- B. 172.23.104.4
- C. 10.4.4.5
- D. 10.4.4.4
Answer: B
NEW QUESTION # 375
Refer to the exhibit.
An engineer configured the New York router with state routes that point to the Atlanta and Washington sites.
When command must be configured on the Atlanta and Washington routers so that both sites are able to reach the loopback2 interface on the New York router?
- A. ipv6 route 0/0 Serial 0/0/0
- B. ip route 0.0.0.0.0.0.0.0 Serial 0/0/0
- C. ipv6 route ::/0 Serial 0/0/0
- D. ipv6 route ::/0 Serial 0/0/1
- E. ipv6 route ::/0 2000::2
Answer: E
NEW QUESTION # 376
Why is a first-hop redundancy protocol implemented?
- A. to protect against default gateway failures
- B. to enable multiple switches to operate as a single unit
- C. to provide load-sharing for a multilink segment
- D. to prevent loops in a network
Answer: A
NEW QUESTION # 377
Drag and drop the attack-mitigation techniques from the left onto the Types of attack that they mitigate on the right.
Answer:
Explanation:
NEW QUESTION # 378
Refer to the exhibit.
Drag and drop the networking parameters from the left onto the correct values on the right.
Answer:
Explanation:
Explanation
NIC vendor OUI -> 00:0C:22NIC MAC address -> 00:0C:22:83:79:A3default gateway -> 192.168.1.193host IP address -> 192.168.1.200subnet mask -> 255.255.255.192 The "ip route" and "ip addr show eth1" are Linux commands.+ "ip route": display the routing table+ "ip addr show eth1": get depth information (only on eth1 interface) about your network interfaces like IP Address, MAC Address information
NEW QUESTION # 379
......
Cisco 200-301 exam is a new version of the CCNA certification exam that replaces all previous versions of the CCNA certification exams. It is designed to align with the latest trends and technologies in the networking industry. 200-301 exam consists of 120 questions, and the candidate has 120 minutes to complete it. The questions are in multiple-choice format, and the passing score for the exam is 825 out of 1000 points.
Verified Pass 200-301 Exam in First Attempt Guaranteed: https://www.braindumpspass.com/Cisco/200-301-practice-exam-dumps.html
Free 200-301 Sample Questions and 100% Cover Real Exam Questions: https://drive.google.com/open?id=16HfQIYJVwXPvxckpp9AcXCu40m6z5Xij
