350-501 Dumps 2022 - New Cisco 350-501 Exam Questions
Free 350-501 Braindumps Download Updated on Jan 09, 2022 with 250 Questions
Related Certifications
- Cisco Certified Specialist – Service Provider Core
Cisco Certified Specialist – Service Provider Core is a creation of the new Cisco curriculum which states that every professional-level exam now earns the candidates a Specialist title alongside the accreditation they are going to obtain. In a nutshell, this is a deserved recognition for your accomplishments at the professional level regardless of your further path.
- CCIE Service Provider
Cisco CCIE Service Provider lies at the pinnacle of the Cisco Service Provider certification track and is exactly the step to make after attaining the CCNP Service Provider certificate. It confirms one's expert-level mastery of Service Provider technologies. To qualify for it, you must pass a combination of two exams a core 350-501 test that focuses on the fundamentals of the field and a hands-on lab exam that checks the mastery of the service provider solutions through a practical environment. The lab exam, in this case, is CCIE Service Provider v5.0.
- CCNP Service Provider
Cisco CCNP Service Provider proves your capability to implement service provider solutions. Achieving this certificate requires meticulous mastery of 350-501 exam concepts in addition to passing the concentration test of your liking. That being said, the full list of the concentration options associated with the CCNP Service Provider certification includes the following: Cisco 300-510 Implementing Cisco Service Provider Advanced Routing Solutions (SPRI), Cisco 300-515: Implementing Cisco Service Provider VPN Services (SPVI), Cisco 300-535: Implementing Automation for Cisco Service Provider Solutions (SPAUTO).
Introduction to Cisco 350-501: Implementing and Operating Cisco Service Provider Network Core Technologies Exam
This exam is for a networking career through how networks operate. This exam introduces architectures, models, protocols, and networking elements â functions needed to support the operations and priorities of mid-sized to large companies and small innovative retailers. You will get the chance to build simple local area networks (LANs) yourself. You will also get a working knowledge of IP addressing schemes, foundational network security, and be able to perform basic configurations for routers and switches.
The primary responsibility of the Associate Network Engineer is to update the technical standards and strategic technical roadmaps. The professionals must take care of the network engineering policies, and operations that include network programmability. The Network Engineer has to act as a backup for the LAN/WAN and Firewall teams whenever required. They must install, monitor, and maintain the LAN infrastructure. The professional should make sure smooth and proper functioning of the network system.
The Troubleshooting and Managing Cisco IP Networks Cisco Training on Demand is an all-inclusive training solution intended to show you how to plan and maintain on a routine basis complex business networks routed and switched. You will first understand how to use technology-based methods and a comprehensive approach to network troubleshooting. You can learn to use both common Cisco IOS troubleshooting tools and more advanced tools such as Syslog, NetFlow, and Cisco IOS Embedded Event Manager (EEM) to help with troubleshooting efforts. In the hands-on workshops, you discover the methods and methods used by network engineers for troubleshooting and managing complex network routed and switching networks. You can also learn how to troubleshoot network connectivity issues, IPv6 connectivity and assignment issues, routing loop issues, Improved Interior Gateway Routing Protocol (EIGRP), Open Shortest Path First (OSPF) Protocol, and Boundary Gateway Protocol (BGP) routing problems. Besides, you are operating via the Dynamic Host Configuration Protocol (DHCP) to resolve problems, network security, and VLAN configuration issues, as well as many other general network issues. A crucial requirement of this course is the opportunity to learn new ideas and deepen comprehension across a wide variety of integrated lab scenarios. You have troubleshooting possibilities through 350-501 practice dumps and several lab environments across a variety of case studies.
NEW QUESTION 106
An engineer is implementing IGMP with SSM on a multicampus network that supports video streaming. Which task must the engineer perform as part of the process?
- A. Configure the network to use bidirectional PIM.
- B. Configure an RP that uses static assignments only.
- C. Configure the network to use IGMPv3.
- D. Configure the network to use the PIM bsr-candidate
Answer: C
NEW QUESTION 107
A network engineer must enable the helper router to terminate the OSPF graceful restart process if it detects any changes in the LSA.
Which command enables this feature?
- A. nsf cisco enforce global
- B. nsf ietf helper disable
- C. nsf cisco helper disable
- D. nsf ietf helper strict-lsa-checking
Answer: B
Explanation:
Section: Networking
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios/12_4t/ip_route/configuration/guide/tgrhelp.html
NEW QUESTION 108
Refer to me exhibit.
A network operator recently configured BGP FlowSpec for me internal IT network What will be inferred from the configuration deployed on me network?
- A. The policy is learned via BGP FlowSpec and drops all traffic for TCP ports 80 and 443
- B. The policy is configured locally on CSR1 and currently has no active traffic
- C. The policy is warned via BC FlowSpec aid has active traffic
- D. The policy is configured locally on CSRl and drops all traffic for TCP ports 80 and 443
Answer: D
NEW QUESTION 109
Refer to the exhibit.
An engineer is configuring multitiopology IS-IS for IPv6 on router R1. Which additional configuration must be applied to complete the task?
A)
B)
C)
- A. Option
- B. Option
- C. Option
- D. Option
Answer: A
NEW QUESTION 110
Drag and drop the functionalities from the left onto the target fields on the right.
Answer:
Explanation:
NEW QUESTION 111
Refer to the exhibit.
Which configuration must be implemented on router R8 so that it will establish OSPF adjacency with R5?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: A
NEW QUESTION 112
Refer to the exhibit.
While troubleshooting a connectivity issue on router R2, a network engineer with an employee id:3876.13.497 notices that although it detects three OSPF links from R1, the OSPF prefixes are missing from the routing table. What is the reason for the problem?
- A. Both loopback interfaces on R1 are configured as stub
- B. The subnet masks on the serial interfaces are mismatched.
- C. The serial interfaces have different MTUs
- D. The R2 Serial 1/0 interface is configured with an IP address, but the R1 Serial R1 Serial 1/0 interface in unnumbered.
Answer: D
NEW QUESTION 113
What is a primary benefit of IPoATM or MPLS over ATM backbone service provider networks?
- A. fixed-length cells
- B. variable-length packets
- C. isochronous system
- D. dedicated circuits
Answer: D
NEW QUESTION 114
What causes multicast traffic to permanently stay on the shared tree and not switch to the source tree?
- A. SSM range is being used.
- B. The RP IP address is configured incorrectly.
- C. The SPT threshold is set to infinity.
- D. The RP announcements are being filtered.
Answer: D
NEW QUESTION 115
Refer to the exhibit:
An engineer wants to authenticate the OSPF neighbor between PEA and PE-B using MD5.
Which command on PE-B successfully completes the configuration?
- A. PE-B(config-if)#ip ospf message-digest-key 1 md5 44578611
PE-B(config-if)#ip ospf authentication key-chain 44578611 - B. PE-B(config-if)#ip ospf message-digest-key 1 md5 44568611
PE-B(config-if)#ip ospf authentication null - C. PE-B(config-if)#ip ospf message-digest-key 1 md5 44578611
PE-B(config-if)#ip ospf authentication null - D. PE-B(config-if)#ip ospf message-digest-key 1 md5 44578611
PE-B(config-if)#ip ospf authentication message-digest
Answer: D
NEW QUESTION 116
Which statement about segment routing prefix segments is true?
- A. It is linked to a prefix SID that is globally unique within segment routing domain.
- B. It requires using EIGRP to operate.
- C. It is the longest path to a node.
- D. It is linked to an adjacency SID that is globally unique within the router.
Answer: A
Explanation:
Section: MPLS and Segment Routing
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/segment-routing/configuration/ guide/b-seg-routing-cg-asr9k/b-seg-routing-cg-asr9k_chapter_010.pdf
NEW QUESTION 117
A customer of an ISP requests support to preferred exit points for the customer AS?
- A. highest local preference outbound
- B. lowest multi-exit discriminator
- C. highest local preference inbound
- D. lowest local preference inbound
Answer: C
NEW QUESTION 118
Refer to the exhibit:
Which statement supports QPPB implementation?
- A. QPPB policies affect only egress traffic
- B. QoS policies are identified in the MPLS forwarding table
- C. QoS policies rely exclusively on BGP attributes to manipulate traffic
- D. QoS policies use BGP to gain full coverage on the network.
Answer: C
NEW QUESTION 119
Refer to the exhibit:
If router RA is configured as shown, which IPv4 multicast address space does it use?
- A. 225.0. 0.0/8
- B. 239.0. 0.0/8
- C. 232.0. 0.0/8
- D. 224.0. 0.0/8
Answer: C
NEW QUESTION 120
Which QoS model allows hosts to report their QoS needs to the network?
- A. CB-WFQ
- B. MQC
- C. DiffServ
- D. IntServ
Answer: D
NEW QUESTION 121 
Refer to the exhibit. A network engineer is implementing QoS services. Which two statements about the qos- group keyword on Cisco IOS XR are true? (Choose two.)
- A. QoS group can be used in fabric QoS policy as match criteria.
- B. It cannot be used with priority traffic class.
- C. It marks packets for end-to-end QoS policy enforcement across the network.
- D. QoS group marking occurs on the ingress.
- E. The QoS group numbering corresponds to priority level.
Answer: A,D
Explanation:
Section: Services
Explanation/Reference:
NEW QUESTION 122
Refer to the exhibit:
If router RA is configured as shown, which IPv4 multicast address space does it use?
- A. 225.0. 0.0/8
- B. 239.0. 0.0/8
- C. 232.0. 0.0/8
- D. 224.0. 0.0/8
Answer: C
NEW QUESTION 123
How is a telemetry session established for data analytics?
- A. A router initiates a session using the dial-out to a destination.
- B. The destination initiate a session using the dial-out more to the router.
- C. A destination initiate a session to a router.
- D. A router requests the data using Teinet.
Answer: B
NEW QUESTION 124
Refer to the exhibit:
This output is included at the end of an output that was provided by a device using NETCONF.
What does the code show?
- A. It shows that the running configuration is blank
- B. It shows that the full configuration is being modeled by VANG
- C. It shows the hostname of the device as rpc-reply
- D. It shows NETCONF uses remote procedure calls.
Answer: D
NEW QUESTION 125
Which task must be performed first to Implement BFD in an IS-IS environment?
- A. Disable Cisco Express Forward.ng on all interfaces running routing protocols other than IS-IS
- B. Configure BFD in an interface configuration mode
- C. Configure BFD under the IS-IS process
- D. Configure all ISIS routers as Level 2 devices
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/iosxr/ncs5500/routing/63x/b-routing-cg-ncs5500-63x/b-routing-cg-ncs55
NEW QUESTION 126
Refer to the exhibit:
This configuration is being applied on an IOS XR router.
Which statement about this configuration is true?
- A. It is used to create a streaming subscription with a 60-second interval
- B. It is used to enable gRPC
- C. It is used to set up configuration to poll network data
- D. It is used to create a streaming subscription with a 600-second interval
Answer: A
NEW QUESTION 127
Refer to the exhibit.
What is the result of this configuration?
- A. Router 1 opens and closes a TCP connection to the TACACS+ server every time a user requires authentication.
- B. Router 1 and the TACACS+ server maintain one open connection between them.
- C. Router 1 opens and closes a TCP connection to the TACACS+ server every time a user requires authorization.
- D. Router 1 and the TACACS+ server maintain one open connection between them only when network administrator is accessing the router with password ciscotest.
Answer: D
NEW QUESTION 128
Which additional feature does MPLS DiffServ tunneling support?
- A. matching EXP and DSCP values
- B. using GRE tunnels to hide markings
- C. interaction between MPLS and IGP
- D. PHB layer management
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/mp_te_diffserv/configuration/15-mt/mp-te-diffserv-15-mt-book/mp-diffserv-tun-mode.html
NEW QUESTION 129
Drag and drop the multicast concepts from the left onto the correct descriptions on the right.
Answer:
Explanation:
Explanation
1: PIM-DM 2:IGMP 3:PIM-SM 3:shared tree 4:source tree
NEW QUESTION 130
......
Cisco 350-501 Exam Practice Test Questions: https://www.braindumpspass.com/Cisco/350-501-practice-exam-dumps.html
Updated Certification Exam 350-501 Dumps - Practice Test Questions: https://drive.google.com/open?id=1TYk1qXC54HaqvZGEiuYVjg4leEifl_2R
