2024 Best HPE3-U01 Exam Preparation Material with New Dumps Questions
Free HPE3-U01 Exam Files Verified & Correct Answers Downloaded Instantly
To prepare for the HPE3-U01 exam, candidates can take Aruba's official training courses, which cover the installation, configuration, and management of Aruba networks. HPE3-U01 course covers topics such as ArubaOS fundamentals, Aruba Instant Access Points, and Aruba AirWave. Candidates can also use study materials such as books, practice exams, and online resources to supplement their training.
HP HPE3-U01 certification exam is designed for IT professionals who are interested in pursuing a career in network technology. Aruba Certified Network Technician Exam certification is specifically designed to validate the skills and knowledge of candidates in configuring, implementing, and managing Aruba wireless solutions. HPE3-U01 exam is a requirement for the Aruba Certified Network Technician (ACNT) certification.
The HP HPE3-U01 exam is suitable for network technicians, system engineers, and network administrators who wish to enhance their Aruba networking expertise. Aruba Certified Network Technician Exam certification enables professionals to develop their career path towards more advanced levels of Aruba networking technology. Moreover, being a certified Aruba network technician could give an individual a competitive edge, as it shows their capability to understand and manage the latest Aruba network technologies effectively.
NEW QUESTION # 19
Which characteristic allows switches to mitigate collisions?
- A. The switches use L3 protocols that eliminate collisions.
- B. The switches support VLANs that segment the collision domains.
- C. The switches have proprietary features that help eliminate collisions.
- D. The switches' ports are independent collision domains.
Answer: B
NEW QUESTION # 20
Which protocols operate on the Management Plane? (Select two.)
- A. Address Resolution Protocol
- B. Transmission Control Protocol
- C. Hypertext Transfer Protocol Secure
- D. Spanning Tree Protocol
- E. Secure Shell
Answer: D,E
NEW QUESTION # 21
Refer to Exhibit.
To which protocol does the header belong?
- A. Internet Protocol version 6
- B. Transmission Control Protocol
- C. Ethernet Protocol
- D. Internet Protocol
- E. User Datagram Protocol
Answer: A
NEW QUESTION # 22
What is the binary equivalent of the decimal number of 233?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 23
Which commands can you use to save the switch configuration changes, so they survive a switch reboot?
(Select two.)
- A. copy running-config checkpoint backup
- B. store memory
- C. write memory
- D. save memory
- E. copy running-config checkpoint startup-config
Answer: B,E
NEW QUESTION # 24
Which accurately describes the 051 Model?
- A. It is a reference model that explains how data is created by the application layer.
- B. It is a reference model that describes how data communications occur on a network.
- C. It is a reference model that describes data flow over the network using four layers.
- D. It is a reference model that is used to convert binary bits into analog signals.
Answer: B
NEW QUESTION # 25
What is a true statement about wireless communications using Wi-Fi?
- A. Amplitude, phase, and frequency of radio waves are modulated to increase range
- B. Wireless communications have a maximum range of 10 meters (30 feet)
- C. Wireless communications have a minimum range of 10 meters (30 feet)
- D. Amplitude, phase, and frequency of radio waves are modulated to transmit data
Answer: D
Explanation:
Explanation
Wi-Fi is a wireless networking protocol that uses radio waves to communicate data over the air. Radio waves are electromagnetic waves that have different characteristics depending on their amplitude, phase, and frequency. Amplitude is the height of the wave, phase is the position of the wave relative to a reference point, and frequency is the number of cycles of the wave per second. To transmit data using Wi-Fi, these characteristics are modulated, or changed, according to a predefined scheme that encodes bits of information.
For example, a high amplitude wave can represent a 1 bit, and a low amplitude wave can represent a 0 bit.
Similarly, a positive phase shift can represent a 1 bit, and a negative phase shift can represent a 0 bit.
Likewise, a high frequency wave can represent a 1 bit, and a low frequency wave can represent a 0 bit. By modulating these characteristics, Wi-Fi can transmit data in binary form over the air. Different modulation schemes can achieve different data rates and reliability, depending on the channel conditions and interference.
Some common modulation schemes used by Wi-Fi are Binary Phase Shift Keying (BPSK), Quadrature Phase Shift Keying (QPSK), Quadrature Amplitude Modulation (QAM), and Orthogonal Frequency Division Multiplexing (OFDM). References: Understanding Wi-Fi and How It Works, Introduction to Wi-Fi Wireless Networking, Wireless Communication - Overview, Wireless Communication | Set 1.
NEW QUESTION # 26
You have connected a Multilayer switch to an Internet Service Provider router that has the 172.16.31.254 IP address. What configuration line do you have to enter on your switch to enable internet access?
- A. routing 0.0.0.0/0 172.16.31.254/24
- B. ip routing 0/0 172.16.31.254
- C. route 172.16.31.254 0.0.0.0 0.0.0.0
- D. Ip route 0.0.0.0/0 172.16.31.254
Answer: D
Explanation:
Explanation
To enable internet access on a multilayer switch, you need to configure a default route that points to the ISP router as the next hop. A default route is a special type of static route that matches any destination IP address that is not found in the routing table. The syntax for adefault route is ip route 0.0.0.0 0.0.0.0
<next-hop-ip-address>, where 0.0.0.0 0.0.0.0 means any IP address and any subnet mask. Alternatively, you can use the slash notation 0.0.0.0/0 to represent the same thing. Therefore, the correct configuration line to enter on the switch is ip route 0.0.0.0/0 172.16.31.254, which means that any traffic that is not destined for a local network will be forwarded to the ISP router at 172.16.31.254.
The other options are incorrect because they either use the wrong syntax or the wrong IP address. Option A uses the route command instead of the ip route command, which is not valid on a multilayer switch. Option C uses the routing command instead of the ip route command, which is also not valid on a multilayer switch.
Option D uses the ip routing command instead of the ip route command, which is used to enable routing on the switch, not to configure a default route. Option D also omits the dots in the IP address and the subnet mask, which makes it invalid.
References:
* What Is a Multilayer Switch and How to Use It?
* Inter-VLAN Routing Configuration - 2024 Step-by-Step Tutorial
* Multilayer Switch - Configuring IP Multilayer Switching
NEW QUESTION # 27
You connect a computer to the network. Assuming you have configured a static address to its NIC, what protocols will the computer run in order to establish a secure web connection to YouTube.com?
- A. DHCP, FTP, and HTTP5
- B. DHCP and https
- C. FTP and https
- D. DHCP, DNS, and HTTPS
- E. DNS and HTTPS
Answer: D
NEW QUESTION # 28
What is part of the 5 GHz band?
- A. Channel 12 and 13
- B. U-NII 5
- C. Channels 149 to 161
- D. Channel 14
Answer: C
Explanation:
Explanation
The 5 GHz band is a radio frequency band used for Wi-Fi communications. It has a higherdata bandwidth than the 2.4 GHz band, but a shorter range and less penetration through walls. The 5 GHz band is divided into several sub-bands, each with a different set of channels. One of these sub-bands is the U-NII-3 band, which covers the frequency range from 5725 MHz to 5850 MHz. This sub-band contains 24 non-overlapping channels, numbered from 149 to 172. Channels 149 to 161 are part of the 5 GHz band and can be used for Wi-Fi communications. Channels 165 and 169 are restricted to indoor use only, and channel 173 is not allowed in some regions. Channels 12, 13, and 14 are not part of the 5 GHz band, but belong to the 2.4 GHz band, which has a different set of channels and regulations. U-NII-5 is not a valid sub-band name, but a proposed extension of the 5 GHz band to include the frequency range from 5925 MHz to 7125 MHz. This extension is not yet approved or implemented, and therefore not part of the 5 GHz band. References: List of WLAN channels, What's the Difference Between 2.4 and 5 GHz Wi-Fi (and Which Should I Use)?, What is the difference between 2.4 GHz, 5 GHz, and 6 GHz wireless frequencies?
NEW QUESTION # 29
Which Wi-Fi technology assists with data privacy on open networks?
- A. Opportunistic Wireless Encryption (OWE)
- B. Wi-Fi Protected Access 2(WPA2)
- C. Simultaneous Authentications of Equals (5AE)
- D. Commercial National Security Algorithm (CNSA)
Answer: B
NEW QUESTION # 30
Which condition allows 5Ghz channels to avoid Adjacent Channel Interference?
- A. transmit at 40 MHz bandwidth
- B. transmit at 20 MHz bandwidth
- C. transmit at high power levels
- D. transmit at low power levels
Answer: A
Explanation:
Explanation
Adjacent Channel Interference (ACI) is a type of interference that occurs when two or more wireless devices use channels that are close to each other in the same frequency band. ACI reduces the signal quality and throughput of the wireless devices, as they have to compete for the same spectrum and deal with the noise from the neighboring channels12 The 5 GHz band has more non-overlapping channels than the 2.4 GHz band, which means that there is less chance of ACI in the 5 GHz band. However, ACI can still occur in the 5 GHz band if the wireless devices use wider channel bandwidths, such as 40 MHz or 80 MHz, which are supported by 802.11n and 802.11ac standards. Wider channel bandwidths can increase the data rate and performance of the wireless devices, but they also occupy more spectrum and reduce the number of available channels134 Therefore, one condition that allows 5 GHz channels to avoid ACI is to transmit at 20 MHz bandwidth, which is the narrowest channel bandwidth supported by 802.11a/n/ac standards. By transmitting at 20 MHz bandwidth, the wireless devices can use more non-overlapping channels in the 5 GHz band and minimize the impact of ACI. However, this alsomeans that the wireless devices will have lower data rates and performance than using wider channel bandwidths134 Another condition that can help avoid ACI in the 5 GHz band is to use channel bonding, which is a technique that combines two or more adjacent channels into one wider channel. Channel bonding can increase the data rate and performance of the wireless devices, but it also requires careful planning and coordination to avoid overlapping with other wireless devices. Channel bonding can be done with 40 MHz or 80 MHz channel bandwidths, but not with 20 MHz channel bandwidths134 References:
https://www.ti.com/pdfs/bcg/80211_acr_wp.pdf
https://www.ti.com/pdfs/bcg/80211_acr_wp.pdf
NEW QUESTION # 31
What is the decimal equivalent of the binary number 10001010?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 32
What are the differences between Local-based and Server-based management? (Select two.)
- A. server-based management can monitor multiple devices at once, local-based cannot
- B. local-based management can use the device's console port, server-based cannot
- C. server-based management cannot talk to the device's control plane, local-based can
- D. local-based management requires an on-premises network management appliance
- E. in local-based, the managed device is a client, while in server-based it is a server
Answer: A,B
Explanation:
Explanation
Local-based management refers to managing a network device directly from the device itself, using tools such as console port, web interface, or command-line interface. Server-based management refers to managing a network device remotely from a centralized server, using tools such as Windows Admin Center, System Center, or Azure Arc123. The differences between these two types of management are:
* Local-based management can use the device's console port, which is a physical connection that allows access to the device even when the network is down or the device is not configured. Server-based management cannot use the console port, as it relies on network connectivity and protocols4.
* Server-based management can monitor multiple devices at once, using a single dashboard or interface that shows the status, performance, and configuration of all the devices in the network. Local-based management can only monitor one device at a time, using the device's own tools123.
References:
1: Cloud vs Server: Learn the Key Differences and Benefits - Parallels 2: Windows Server management overview | Microsoft Learn 4: 5 Benefits of Server-Based Local Access Networks for Small ... - Versatech 3:
What is Windows Admin Center | Microsoft Learn
NEW QUESTION # 33
Which statements are true about Access Points? (Select two.)
- A. They only operate at Layer three of the OSI model.
- B. They offer wireless connectivity to endpoints.
- C. They are used to interconnect wireless devices only.
- D. They bridge wireless frames to the wired network.
- E. They use destination IP addresses to switch the packets.
Answer: B,E
NEW QUESTION # 34
What is the goal of the TCP three-way handshake?
- A. To notify the number of segments that will be sent.
- B. To acknowledge the reception of the segments.
- C. To notify the destination who the originator is.
- D. To establish a reliable, flow-controlled connection.
Answer: D
Explanation:
Explanation
The TCP three-way handshake is a process that is used in a TCP/IP network to create a connection between a client and a server. It involves the exchange of three packets: SYN, SYN-ACK, and ACK. The goal of the TCP three-way handshake is to establish a reliable, flow-controlled connection between the two endpoints.
This means that the connection is able to ensure that the data is transmitted without errors, losses, or duplications, and that the data is sent at a rate that both sides can handle.
The TCP three-way handshake works as follows:
* The client initiates the connection by sending a SYN packet to the server. The SYN packet contains a random sequence number that indicates the starting point of the data that the client will send.
* The server responds to the client by sending a SYN-ACK packet. The SYN-ACK packet contains the server's own sequence number and an acknowledgment number that is equal to the client's sequence number plus one. This indicates that the server has received the client's SYN packet and is ready to receive data from the client.
* The client completes the handshake by sending an ACK packet to the server. The ACK packet contains an acknowledgment number that is equal to the server's sequence number plus one. This indicates that the client has received the server's SYN-ACK packet and is ready to send data to the server.
After the TCP three-way handshake is completed, the connection is established and the data transfer can begin.
References: The answer can be verified by using the following resources:
* TCP 3-Way Handshake Process - GeeksforGeeks
* TCP 3-Way Handshake (SYN, SYN-ACK,ACK) - Guru99
* Akamai Blog | What is a TCP Three-Way Handshake?
* What is a Three-Way Handshake? - Definition from Techopedia
* What is TCP 3-Way Handshake, Benefits, and Drawbacks? - Networking Signal
NEW QUESTION # 35
Which organization is in charge of determining the International Standards?
- A. Internet Engineering Task Force
- B. Federal Communications Commission
- C. Institute of Electrical and Electronics Engineers
- D. Wi-Fi Alliance
Answer: C
Explanation:
Explanation
The Institute of Electrical and Electronics Engineers (IEEE) is an organization that develops and publishes international standards for various fields of engineering, including electrical, electronic, computer, software, and telecommunications. IEEE standards are widely used and recognized by the industry, academia, and governments. IEEE standards cover topics such as wireless networking, Ethernet, power systems, smart grid, cybersecurity, robotics, biomedical engineering, and more. IEEE standards are developed by consensus among experts from different sectors and regions, and are reviewed and updated regularly to reflect the latest technologies and best practices. IEEE standards aim to promote innovation, interoperability, safety, reliability, and efficiency in engineering applications. References: IEEE Standards Association, IEEE - Wikipedia, IEEE Standards - Creative Safety Supply
NEW QUESTION # 36
......
Instant Download HPE3-U01 Dumps Q&As Provide PDF&Test Engine: https://www.braindumpspass.com/HP/HPE3-U01-practice-exam-dumps.html
Fast Exam Updates HPE3-U01 dumps with PDF Test Engine Practice: https://drive.google.com/open?id=1fhaD1goSn04HFRTTIfsln9lsYjjX8FpJ