2022 NS0-519 Premium Files Test pdf - Free Dumps Collection
Get ready to pass the NS0-519 Exam right now using our NetApp Certified Exam Package
NEW QUESTION 27
You are asked to increase the size of your existing 4-node FAS8060 cluster running ONTAP 9.7 software with four additional AFF A700 nodes.
Which tool enables you to confirm that this will be a valid addition?
- A. Active IQ
- B. Hardware Universe (HWU)
- C. Active IQ Config Advisor
- D. Active IQ OneCollect
Answer: B
NEW QUESTION 28
Click the Exhibit button.
An administrator has added two nodes to an existing cluster. The administrator created the svfc2 SVM to use FC to present LUNs to hosts. The hosts are unable to see the LUNs that have been presented to them.
Referring to the exhibit, what is the problem?
- A. The FC protocol needs to be added to the allowed protocols list.
- B. The FC ports show the status of admin down.
- C. The UTA mode change Is pending a reboot.
- D. The FC service on the SVM has been stopped.
Answer: C
NEW QUESTION 29
An administrator is designing a SAN solution.
What are two considerations when completing this task? (Choose two.)
- A. identifying the maximum number of paths that are supported by a host operating system
- B. identifying the maximum number of paths that are supported by a multipath driver
- C. limiting the number of paths to eight paths per node
- D. limiting the number of paths to eight paths per LUN
Answer: A,B
NEW QUESTION 30
An ONTAP administrator is troubleshooting a fabric login issue with a client. The SVM in question uses both FC and NFS protocols.
In this scenario, what would be the least disruptive operation?
- A. Use ONTAP System Manager to stop and then restart the SVM.
- B. Use the command line to stop and start the FCP service on the cluster.
- C. Reboot the Brocade switch.
- D. Use ONTAP System Manager to disable and then re-enable the LIF port in the SVM.
Answer: C
NEW QUESTION 31
Click the Exhibit button.
Referring to the exhibit, which switch in the fabric is the principal switch?
- A. sw5
- B. sw4
- C. sw10
- D. sw6
Answer: D
NEW QUESTION 32
You have a 4-node cluster with an AFF A400 FIA pair and a FAS8700 FIA pair. You need to configure all aggregates so that they have an SSD performance tier and slower capacity tier. The cluster serves only FC LUNs to hosts.
Which two ONTAP features satisfy the requirement for this cluster? (Choose two.)
- A. SnapMirror
- B. FlexCache
- C. FabricPool
- D. Flash Pool
Answer: C,D
NEW QUESTION 33
An administrator enabled the iSCSI protocol on an SVM and created a LUN for a VMware ESXi server.
After the administrator performs a rescan, the LUN is not visible on the host.
Which statement describes how to solve this problem?
- A. Perform a takeover/giveback of the controller that is hosting the LUN.
- B. Enable ALUA support on the VMware host.
- C. Create an igroup, add the WWPN of the host initiator, then map the LUN to the igroup.
- D. Create an igroup, add the iSCSI IQN, then map the LUN to the igroup.
Answer: D
NEW QUESTION 34
You have an SVM serving LUNs to your VMware environment. You have configured the SAN LIFs, zoning, and multipath by using industry best practices. You need to temporarily migrate a SAN LIF to another host, preserving the SAN LIF's WWPN. You do not want to lose access to the LUNs during LIF migration.
In this scenario, what are three required steps that are needed to accomplish this task? (Choose three.)
- A. Set the new home node and home port in the LIF.
- B. Update the zone using the WWPN of the destination host's physical port.
- C. Bring the LIF online.
- D. Take the LIF offline.
- E. Nondisruptively migrate the LIF to the destination host.
Answer: A,C,D
NEW QUESTION 35
You are connecting an ISL between two Brocade switches on ports 20 and 21.
Which port-channel type should you configure?
- A. E_port
- B. U_port
- C. F_port
- D. FL_port
Answer: A
NEW QUESTION 36
A customer has decided to repurpose a NetApp FC target card from an older system. After installing the card into the newer NetApp AFF, the system kernel panics on boot.
Which tool would you use determine the problem?
- A. OnCommand Insight (OCI)
- B. Interoperability Matrix Tool (IMT)
- C. Hardware Universe (HWU)
- D. Active IQ OneCollect
Answer: C
NEW QUESTION 37
You have a 2-node AFF A400 cluster serving iSCSI LUNs. Each A400 controller has two aggregates. The LUNs in all aggregates share data that is inline deduplicated. You are asked to enable encryption at rest to satisfy a new compliance requirement.
In this scenario, which at rest encryption solution preserves the current deduplication?
- A. Internet Protocol Security (IPsec)
- B. NetApp Aggregate Encryption (NAE)
- C. NetApp Volume Encryption (NVE)
- D. Challenge Handshake Authentication Protocol (CFIAP)
Answer: B
NEW QUESTION 38
You have a 2-node AFF A220 switchless cluster serving iSCSI LUNs. NetApp Volume Encryption (NVE) is enabled on all data volumes. You are asked to consolidate identical boot LUNs that are on both controllers. You need to nondisruptively consolidate LUNs with the highest storage efficiency.
In this scenario, which NetApp ONTAP technology accomplishes this task?
- A. aggregate relocate
- B. LUN move
- C. LIF migrate
- D. volume move
Answer: D
NEW QUESTION 39
A storage administrator is setting up a Red Hat Enterprise Linux 8.1 system to use NVMe storage in ONTAP 9.7.
In this scenario, which action is required?
- A. Load the Ethernet drivers.
- B. Set up ALUA.
- C. Set up the Red Hat auto mounter.
- D. Load the FC HBA drivers.
Answer: D
NEW QUESTION 40
An administrator is asked to provide enhanced security measures to an iSCSI LUN using the Challenge Handshake Authentication Protocol (CHAP) with the iscsi security create command.
In this scenario, for which two objects should the administrator configure CHAP? (Choose two.)
- A. for the target IQN or EUI
- B. for the iSCSI LUN
- C. for the initiator IQN or EUI
- D. for the volume containing the iSCSI LUN
Answer: B,C
NEW QUESTION 41
An administrator wants to connect a DS460C disk shelf to a FAS9000.
Which two statements are correct in this scenario? (Choose two.)
- A. A C19/C20 power cable and compatible rack power distribution unit are required.
- B. A C13/C14 power cable and compatible rack power distribution unit are required.
- C. A deep rack is required
- D. A Telco rack is required
Answer: B,C
NEW QUESTION 42
Click the Exhibit button.
You need to perform an automated non-disruptive upgrade from ONTAP 9.5 to ONTAP 9.7.
Referring to the exhibit, which tool would be used?
- A. Upgrade Advisor
- B. AutoSupport OnDemand
- C. Perfstat
- D. OneCollect
Answer: A
NEW QUESTION 43
Click the Exhibit button.
Referring to the exhibit, you need to reduce the number of paths from the host to the LUNs.
Which three would reduce the number of paths? (Choose three.)
- A. Selective LUN Map (SLM)
- B. ALUA
- C. port sets
- D. Asymmetric Namespace Access (ANA)
- E. switch zoning
Answer: A,C,E
NEW QUESTION 44
An administrator suspects abnormal operation and performance-related issues within a particular SAN environment. The administrator wants to further investigate the environment in terms of overall health, best practice recommendations, proactive remediation, and risk assessments, as compared to other SAN deployments.
Which tool should the administrator use to assess this information?
- A. Active IQ
- B. Interoperability Matrix Tool (IMT)
- C. Active IQ Config Advisor
- D. Active IQ OneCollect
Answer: C
NEW QUESTION 45
You are called to help with a new customer's SAN environment that consists of an 8-node AFF A700 cluster, Cisco MDS fabric switches, and Cisco UCS servers.
Which two tools would help you to assess the environment? (Choose two.)
- A. Active IQ OneCollect
- B. Brocade SAN Health
- C. NetApp ONTAP Mediator
- D. Active IQ Upgrade Advisor
Answer: A,D
NEW QUESTION 46
You have a new 2-node AFF All SAN Array A700 cluster serving iSCSI LUNs. You are asked to test failures of the front-end protocol connections.
Which two actions satisfy the failure criteria? (Choose two.)
- A. Disable Snapshot policies.
- B. Perform a storage controller failover.
- C. Pull an Ethernet cable from a storage port with a cluster LIF.
- D. Pull an Ethernet cable from a Linux host.
Answer: B,D
NEW QUESTION 47
You just finished installing and configuring a new NetApp AFF All SAN Array environment.
In this scenario, which two tools would you use to verify that the environment satisfies best practices? (Choose two.)
- A. Active IQ Unified Manager
- B. Active IQ Config Advisor
- C. ONTAP System Manager
- D. Active IQ OneCollect
Answer: A,B
NEW QUESTION 48
An administrator added the FCP protocol to an SVM and created a LUN for a Windows Server 2019 server. After a rescan, the LUN is not visible on the host.
Which two statements describe how to solve this problem? (Choose two.)
- A. Perform takeover and giveback of both controllers.
- B. Disable and enable the FC port with the attached host, causing a FLOGI.
- C. Create an igroup, add the WWPN of the host initiator, and then map the igroup to the LUN.
- D. Create a zone with a single initiator and the target LIF's WWPN.
Answer: C,D
NEW QUESTION 49
You have an AFF A220 cluster connected to a dual fabric topology. You must ensure that SAN hosts do not lose access to LUNs during unplanned failures.
Which two operations should be performed to accomplish this task? (Choose two.)
- A. Turn the power off on one disk shelf.
- B. Manually set all FC LIFs on a single node to "down".
- C. Manually set all LUNs offline.
- D. Initiate a reboot of one Fibre Channel switch.
Answer: B,D
NEW QUESTION 50
......
Master 2022 Latest The Questions NetApp Certified and Pass NS0-519 Real Exam!: https://www.braindumpspass.com/NetworkAppliance/NS0-519-practice-exam-dumps.html
