2021 Updated Verified Pass CTAL-TAE Study Guides & Best Courses
Ultimate Guide to the CTAL-TAE - Latest Edition Available Now
ISQI CTAL-TAE Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
NEW QUESTION 19
You identified a suitable project to pilot an automation tool and planned and conduced a pilot. The pilot has been successful and tool Is being deployed within your organization, with a plan to increase tool use by the one project at a time. During this rollout some test processes will be changed slightly to gain additional benefits from using the tool.
In the pilot project, a small set of manual tests were automated for the first time. You are currently monitoring the test automation efficiency and this reveals that the automationregimefor the tests is not yet mature.
Which of the following statements is TRUE?
- A. The approach used for deployed this tool is aligned to the standard success factor for deployment
- B. The test process should be radically changed to gain additional benefits from using the tool.
- C. The pilot project should have been critical so that maximum benefits were delivered
- D. The target defined for the project was inappropriate, because the automationregimeforthe automated tests at the end of the pilot is not yet mature.
Answer: B
NEW QUESTION 20
Consider a TAS that uses a keyword-driven framework. The SUT is a web application and there is a large set of keywords available for writing the automated tests that relate to highly specific user actions linked directly to the GUI of the SUT. The automated test written with the keywords are statically analyzed by a custom tool which highlight's repeated instances of identical sequence of keywords. The waiting mechanism implemented by the TAS for a webpage load is based on a synchronous sampling within a given timeout. The TAS allowschecking a webpage load everyseconds until a timeout value
- A. Establishing an error recovery process for TAS and SUT
- B. Changing the scripting approach to data-driven scripting
- C. Changing the wait mechanism to explicit hard-coded waits
- D. Implementing keywords with a higher level of granularity
Answer: D
NEW QUESTION 21
Consider the following example of TAS metrics.
Time to execute automated tests
Speed and efficiency of TAS components
Which of the following statements is TRUE?
- A. A and b are both external TAS metric
- B. A and B are both internal TAS metrics
- C. A is an internal TAS metric and B is an external TAS metric
- D. A is and external TAS metric and b is an internal TAS metric
Answer: B
NEW QUESTION 22
What is NOT a factor in considering when you are asked to ensure an effective transition from manual to automated tests?
- A. Complexity to automate the manual test cases
- B. Correctness of test data and test cases
- C. The controllability of the SUT
- D. The look and feel of the SUT
Answer: C
NEW QUESTION 23
What is NOT a factor in considering when you are asked to ensure an effective transition from manual to automated tests?
- A. Complexity to automate the manual test cases
- B. The look andfeel of the SUT
- C. The controllability of the SUT
- D. Correctness of test data and test cases
Answer: B
NEW QUESTION 24
Youare using a gTAA to create a TAS for a project. The TAS is aimed specifically at automating a suit of existing manual test cases for standalone desktop applications. All the interfaces between the TAS and SUT will be from the CUI of the application.
Whichof the following layers of the gTAA should you focus on for the TAS?
- A. The Test Definition layer
- B. The Test Adaption layer
- C. The Test Execution layer
- D. The test Generation layer
Answer: B
NEW QUESTION 25
You identified a suitable project to pilot an automation tool and planned and conduced a pilot. The pilot has been successful and tool Is being deployed within your organization, with a plan to increase tool use by the one project at a time. During this rollout some test processes will be changed slightly to gain additional benefits from using the tool.
In the pilot project, a small set of manual tests were automated for the first time. You are currently monitoring the test automation efficiency and this reveals that the automation regime for the tests is not yet mature.
Which of the following statements is TRUE?
- A. The pilot project should have been critical so that maximum benefits were delivered
- B. The target defined for the project was inappropriate, because the automation regime for the automated tests at the end of the pilot is not yet mature.
- C. The test process should be radically changed to gain additional benefits from using the tool.
- D. The approach used for deployed this tool is aligned to the standard success factor for deployment
Answer: D
NEW QUESTION 26
Your goal is to verify completeness, consistency and correct behavior of an automated test suite. The TAS has been proven to successfully install in the SUT environment. All the preliminary checks to verify the correct functioning of the automated test environment and test tool configuration, installation and setup have successfully completed.
Which of the following is NOT a relevant check for achieving your goal in this scenario?
- A. Checking whether the post condition have been fulfilled for all the test cases
- B. Checking whether theloading of the TAS is repeatable in the SUT environment
- C. Checking whether all the test cases contain the expected results
- D. Checking whether all the test cases produce repeatable outcomes
Answer: D
NEW QUESTION 27
You are working on a TAS forstandaloneapplication. The automated tests are developed based on a automation framework that allows interaction with GUI elements using on object orientated API. The GUI elements includemenus, buttons, radio buttons, text toolbars and their properties.
Whilst automating a test, you have discovered that the GUI elements of some third party components are not identifiable by the automated tool you are using.
Which of the following is the FIRST step that you take to investigate this issue?
- A. Verify whether naming standards for variables and have been defined for the current automation solution
- B. Adopt an approach that uses the coordinates of the GUI elements instead
- C. Verify whether the GUI identification depends on the browser.
- D. Verify the testability support with the providers of the third party components
Answer: B
NEW QUESTION 28
You are reviewing the testability of your SUT.
Which of the following BEST refers to the characteristic of OBSERVABILITY?
- A. The ability of the SUT to perform its intended function for a specified period of time
- B. The ability of the SUT to prevent unauthorized access to its components or data.
- C. The ability to identify states, outputs, intermediate result and error messages in the SUT
- D. The ability to exercise the SUT by entering inputs, triggering events and invoking methods
Answer: A
NEW QUESTION 29
You are executing the first test run of a test automation suite of 200 tests. All the relevant information related to the state of the SUT and to the automated test execution is stored in a small database. During the Automated test run you observe that the first 10 test pass, while an abnormal termination occurs when executing the
11thtest. This test does not complete its execution and the overall execution of the suite is aborted. An immediate analysis of the abnormal termination is expected to be time consuming and you have been asked to produce a detailed report of the execution results for the first test run, as soon as possible.
What is the MOST important FIRST step to be taken immediately after the abnormal occurred when executing the 11thtest?
- A. Take a backup of the database in its current state. So It can be analyzed later
- B. Re-run the test automation suite starting from the 12thtest
- C. Re-run the test automation suite starting from the 1sttest.
- D. Return the database to a consistent state that allows subsequent test to run
Answer: A
NEW QUESTION 30
As a TAE you are evaluating a functional test automation tool that will be for several projects within yourorganization. The projects require that tool to work effectively and efficiently with SUT's in distributed environments. The test automated tool also needs to interface with other existing test tools (test management tool and defect tracking tool.) The existing test tools subject to planned updates and their interface to the test automated tool may not work property after these updates.
Which of the following are the two LEAST important concerns related to the evaluation of the test automation in this scenario?
* Is the test automation tool able to launch processors and execute test cases on multiple machines in
* different environments?
* Does the test automation tool support a licensing scheme that allows accessing different sets?
* Does the testautomation tool have a large feature set, but only part of the features will be sets?
* Do the release notes for the planned updates on existing specify the impacts on their interfaces to other tools?
Does the test automation tool need to install specific libraries that could impact the SUT?
- A. A and C
- B. B and E
- C. C and D
- D. A and E
Answer: B
NEW QUESTION 31
Consider thefollowing example of TAS metrics.
Time to execute automated tests
Speed and efficiency of TAS components
Which of the following statements is TRUE?
- A. A and b are both external TAS metric
- B. A is an internal TAS metric and B is an external TAS metric
- C. A is and external TAS metric and b is an internal TAS metric
- D. A and B are both internal TAS metrics
Answer: C
NEW QUESTION 32
Which of the following BEST describes why it is important to separate test definition from test execution in a TAA?
- A. It allows specify test cases without being closely tied to the tool to run them against the SUT
- B. It allows developing steps of the test process without being closely tied to the SUT interface.
- C. It allows testers to findmore defects on the SUT
- D. It allow choosing different paradigms (e.g event-driven) for the interaction TAS and SUT
Answer: A
NEW QUESTION 33
Consider A TAS for testing a desktop application via its GUI. All the test cases of the automated test suite contain the same identical sequences of steps at the beginning (to create the necessary objects when doing a preliminary configuration of the test environment and at the end (to remove everything created -specifically for the test itself during the preliminary configuration of the test environment). All automated test cases use the same set of assertion functions from a shared library, for verifying the values in the GUI fields (e.g text boxes).
What is the BEST recommendation for improving the TAS?
- A. Implementing standard setup and teardown functions at test case level
- B. Implementing keywords with higher level of granularity
- C. Adopting a set of standard verification methods for use by all automated tests
- D. Improving the architecture of the application in order to improve its testability
Answer: B
NEW QUESTION 34
Which of the following metrics could suggest, under certain condition that an automated regression test suite has NOT been updated for new functionalities added to the SUT?
- A. The SUT code coverage provided by the execution of the regression test suite.
- B. The ratio of comments to executable statements in the SUT code.
- C. The defect density in the automation code of the regression test suite.
- D. The ratio of commands to executable statements in the automation code of the regression test suite
Answer: A
NEW QUESTION 35
......
Dumps MoneyBack Guarantee - CTAL-TAE Dumps Approved Dumps: https://www.braindumpspass.com/ISQI/CTAL-TAE-practice-exam-dumps.html
2021 Updated Verified Pass CTAL-TAE Exam - Real Questions & Answers: https://drive.google.com/open?id=1hcjLOfGxwuKbF5ua7V3NPz8VrBky2Arz
