[2021] Pass JN0-663 Exam - Real Questions & Answers
JN0-663 Exam Questions Get Updated [2021] with Correct Answers
How to Prepare for Service Provider Routing and Switching, Professional JN0-663 Exam
Preparation Guide for Service Provider Routing and Switching, Professional JN0-663 Exam
Introduction
Juniper Networks, Inc. is an American multinational company based in Sunnyvale, California. The business designs and markets networking products, including routers, switches, network management tools, network security products, and software-defined networking technologies.
Juniper Networks initially concentrated on core routers used by Internet Service Providers (ISPs) to conduct IP address searches and guide internet traffic. By purchasing Unisphere, the firm joined the market in 2002 for edge routers used by ISPs to redirect Internet traffic to individual users. In 2003, Juniper joined the IT defense business with its JProtect security toolkit before purchasing NetScreen Technologies security company the following year. Juniper joined the enterprise market in the early 2000s, accounting for one-third of its sales by 2005. As of 2014, Juniper concentrated on designing innovative software-defined networking devices.
Many applicants involved in Service Provider Routing and Switching, Technical (JNCIP-SP) qualification may be familiar with the JN0-662 test. However, the JN0-662 Lifetime Exam (EOL) concluded on June 21, 2020. You need to take the JN0-663 Juniper certification exam now to complete the Service Provider Routing and Switching, Technical (JNCIP-SP) certification exam. Juniper JNCIP â SP Certification is the technical standard of Juniper Service Provider Routing and Switching Certification Track. The Juniper Networks Certification Program (JNCP) Service Provider Routing and Switching Track helps members to show competence in Juniper Networks technologies. Successful candidates show comprehensive knowledge of networking technologies in general and the Juniper Networks service provider routing and switching platforms. This credential protocol allows applicants to pass four tests, including the Associate Exam (JN0-103), the Expert Exam (JN0-362), and the Technical Exam (JN0-663).
In this guide, we will cover the Juniper JNO-663 practice exams, certified professionals salary, and all aspects of the Service Provider Routing and Switching, Professional certification
NEW QUESTION 22
Exhibit:
Referring to the exhibit, you want to reduce the CPU processing load on PE 2 by preventing the receipt of routes belonging to Customer B.
In this scenario, which Layer 3 VPN scaling mechanism provides this functionality?
- A. route target filtering
- B. route refresh
- C. route origin
- D. route reflection
Answer: A
NEW QUESTION 23
Exhibit:
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. R2 stops sending LSAs into the network.
- B. R1 will never forward transit traffic through R2.
- C. Transit traffic from R1 to R4 will traverse R3.
- D. The OSPF interface metrics on R2 are all set to 65535.
Answer: C,D
NEW QUESTION 24
Exhibit:
Referring to the exhibit, what will the IS-IS cost be for R1 to reach R3?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 25
Exhibit:
Which two statements regarding the output shown in the exhibit are correct? (Choose two.)
- A. The PEs have matching control word values.
- B. The label associated with this virtual circuit is out of range.
- C. The type of connection is local.
- D. The type of connection is remote.
Answer: A,D
NEW QUESTION 26
Exhibit:
Which three statements are true about the show pim join output shown in the exhibit? (Choose three.)
- A. The shortest path to the source is through the RP
- B. The multicast stream has been configured with a backup path to allow for fast reroute.
- C. The multicast stream does not have an RP.
- D. This is a source-specific multicast stream. G The multicast receiver is still using the RP to receive the stream.
Answer: A,B,C
NEW QUESTION 27
Exhibit:
The exhibit shows a BGP peering session for two PE routers. The BGP session is up, but the hosts in the Layer
2 VPN that uses the BGP session are unable to communicate.
What is the problem in this situation?
- A. The BGP peer does not support the restarter functionality.
- B. The local BGP router does not support Layer 2 VPN and Layer 3 VPN NLRI address families at the same time.
- C. There is a mismatch in the supported NLRI address families between the BGP peers.
- D. The BGP peer does not support the add-path feature.
Answer: C
NEW QUESTION 28
Click the Exhibit button.
A network administrator is investigating why traffic from R2 is not being forwarded to R1 Referring to the show isis database command output shown in the exhibit, what is causing this problem on the network?
- A. R2 is ignoring specific LSPs from R1 in its SPF calculations.
- B. R1 is configured to drop all incoming traffic.
- C. The preferred interface between R1 and R2 is experiencing errors
- D. R1 and R2 are in different IS-IS areas.
Answer: A
NEW QUESTION 29
Exhibit:
Your network is connected to two different ISPs and you notice that they are using your network for transit traffic.
In this scenario, which two configuration statements will solve this problem? (Choose two.)
- A. set policy-options as-path LOCAL-ROUTES "()"
- B. set policy-options as-path LOCAL-ROUTES " (65310 I 65441)+"
- C. set policy-options policy-statement ISP term ROUTES then reject
- D. set policy-options policy-statement ISP term REST then reject
Answer: A,D
NEW QUESTION 30
Exhibit:
The exhibit shows a BGP peering session for two PE routers. The BGP session is up, but the hosts in the Layer
2 VPN that uses the BGP session are unable to communicate.
What is the problem in this situation?
- A. The BGP peer does not support the restarter functionality.
- B. The local BGP router does not support Layer 2 VPN and Layer 3 VPN NLRI address families at the same time.
- C. There is a mismatch in the supported NLRI address families between the BGP peers.
- D. The BGP peer does not support the add-path feature.
Answer: C
NEW QUESTION 31
Exhibit:
Referring to the exhibit, which two statements are true? (Choose two.)
- A. There is one interface marked as passive.
- B. This router is an ABR
- C. There are two interfaces marked as passive.
- D. This router is an ASBR.
Answer: C,D
NEW QUESTION 32
Exhibit:
Referring to the exhibit, the local BGP router is receiving IPv4 routes from the BGP neighbor, but it is not receiving L3 VPN routes from the BGP neighbor.
Which two actions should you take to solve this problem? (Choose two.)
- A. Configure the family inet unicast statement on the local BGP router.
- B. Configure the family inet-vpn unicast statement on the BGP neighbor.
- C. Configure the family inet-vpn unicast statement on the local BGP router.
- D. Configure the family inet unicast statement on the BGP neighbor
Answer: B,C
NEW QUESTION 33 
Refer
ring to the exhibit, which two statements are correct for a route advertised by R1 towards R4? (Choose two.)
- A. The BGP next hop is set to 192.168.2.2 by R2.
- B. The AS path is set to 150 by R2.
- C. The BGP next hop is set to 14.1.1.1 by R2.
- D. The AS path is set to null by R2.
Answer: C,D
NEW QUESTION 34
Which two statements are true about what a route reflector does by default when distributing routes it has received from reflector clients? (Choose two.)
- A. It sets the next hop of all routes to "self' to prevent routing loops.
- B. It changes the default BGP attributes to inform peers that it is a route reflector.
- C. It does not change any received BGP attributes.
- D. It adds its cluster ID to the client-received routes.
Answer: C,D
NEW QUESTION 35
Exhibit:
You are troubleshooting an issue where R1 is no longer receiving the default IS-IS route from R3.
Referring to the exhibit, which action would you take to solve the problem?
- A. Delete the protocols isis ignore-attached-bit configuration statement on R1.
- B. Delete the protocols isis import configuration statement on R1.
- C. Delete the protocols isis level 2 disable configuration statement on R3.
- D. Delete the protocols isis ignore-attached-bit configuration statement on R3.
Answer: A
NEW QUESTION 36
Exhibit:
You notice an inconsistency between the routing table and the OSPF database, as shown in the exhibit.
What are two reasons for this behavior? (Choose two.)
- A. An OSPF export policy is being applied to the route.
- B. An OSPF import policy is being applied to the route.
- C. The LSA is a Type 5 LSA.
- D. The LSA is a Type 4 LSA.
Answer: B,C
NEW QUESTION 37
Exhibit:
R2 is receiving a route from R1 and you must ensure that the route is not advertised to R3.
Referring to the exhibit, which two configurations on R2 will solve the issue? (Choose two.)
- A. Apply the no-export policy as an import policy under group 65001
- B. Apply the no-export policy as an export policy under group 65003
- C. Apply the no-advertise policy as an export policy under group 65003
- D. Apply the no-advertise policy as an import policy under group G5001
Answer: C,D
NEW QUESTION 38 
Referring to the exhibit, which three statements about route 10.222/16 are correct when using the default BGP advertisement rules? (Choose three)
- A. R1 will advertise 10.222/16 to R2 with itself as the next hop.
- B. R2 will prepend AS10 when advertising 10.222/16 to R7.
- C. R1 will prepend AS10 when advertising 10.222/16 to R2.
- D. R2 will advertise 10.222/16 to R4 with itself as the next hop.
- E. R7 will advertise 10.222/16 to R9 with itself as the next hop.
Answer: B,D,E
NEW QUESTION 39
Exhibit:
Referring to the ABR configuration shown in the exhibit, which three statements are correct? (Choose three.)
- A. The ABR advertises a Type 5 external LSA to the backbone area for each Type 7 LSA in the NSSA.
- B. The ABR does not summarize any routes within the 192.168.16.0/20 range.
- C. The ABR advertises a single Type 3 summary LSA to the backbone area for all Type 1 and Type 2 LSAs in the 192.168.16 0/20 range.
- D. The ABR advertises a default route to the NSSA using a Type 7 LSA.
- E. The ABR advertises a single Type 5 external LSA to the backbone area for all Type 7 LSAs in the NSSA.
Answer: A,C,D
NEW QUESTION 40
......
Certification Path of Service Provider Routing and Switching, Professional JN0-663 Exam
JNCIS-SP Certification is the prerequisite for the JNCIS-SP JN0-663 exam. The Juniper Service Provider Routing & Switching qualification test is administered for participants to have an excellent command of Juniper JN0-663. If you are taking the JN0-663 test. At the end of this Service Provider Routing and Switching, Technical (JNCIP-SP) test, you can hear about the new levels of Service Provider Routing and Switching, Professional (JNCIP-SP) e.g. standardized, semi-structural, and unstructured. The length of the Juniper Service Provider Routing & Switching Certification is one hour. Multiple option JN0-663 questions are asked in the test, and if you want to pass the exam in the first attempt, you can purchase different Juniper JN0-663 exam dumps for better preparation.
Career Benefits
Certifications from Juniper Networks most commonly lead to network engineering roles, either with Juniper Networks directly or with consulting firms promoting the related products. Moreover, you can apply for positions such as Network Administrators and Network Security Engineers. Average remuneration for Network Engineers starts at $51,000 up to $108,000 per year, whereas earnings for Network Admins are estimated at $84,000 annually as rendered by Payscale. So, as far as you can see it can pay off well to get the necessary experience and at least one Juniper certification.
Practice JN0-663 Questions With Certification guide Q&A from Training Expert BraindumpsPass: https://www.braindumpspass.com/Juniper/JN0-663-practice-exam-dumps.html
