1z0-1045-22 Updated Exam Dumps [2023] Practice Valid Exam Dumps Question
1z0-1045-22 Sample with Accurate & Updated Questions
Oracle 1z0-1045-22 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NEW QUESTION 12
When creating an Appointment, which three "Matching value type" selections can be used to create the Appointment? (Choose three.)
- A. PO Number
- B. Advance Shipment Notification
- C. Dock Door
- D. Load Nbr
- E. License Plane Nbr
- F. Trailer Nbr
Answer: A,C,D
NEW QUESTION 13
What configuration is needed to create Advance Shipment Notifications for a Transfer Order shipped between two facilities configured in the same WMS Cloud environment?
- A. The Facility parameter key AUTOLOAD_and_SHIP should be set to Yes.
- B. The "ACCEPT TRANSFER SHIPMENT" flag should be enabled on the Facilities UI screen for the Source Facility.
- C. The "ACCEPT TRANSFER SHIPMENT" flag should be enabled on the Facilities UI screen for the Destination Facility.
- D. Set CREATE_ASN_FOR_EACH_PO to YES at the Company level.
- E. Set CREATE_ASN_FOR_EACH_PO to YES at Source and Destination Facility levels.
Answer: C
NEW QUESTION 14
Your client finds it easier to read reports without repeated values. The client shared an example report to demonstrate the way they want their columns to be displayed.
What action should you take to make your report look like the example report provided by client?
Report A:
- A. Select the Suppress Duplicate Values icon.
- B. Select Chart Wizard, and delete repeated values.
- C. Select the Hide Repeated Values icon.
- D. Select the Hid Common Values icon.
Answer: B
NEW QUESTION 15
Identify two correct statements about the type of receiving supported by Oracle WMS Cloud. (Choose two.)
- A. Oracle WMS Cloud does not allow assigning multiple ASNs to a load.
- B. Receive by ASN (RF-Text: Recv LPN Shipment) allows receiving multiple ASNs.
- C. If the trailer contains multiple ASNs, IB Loads can be used to consolidate then into a single record.
- D. Receive by load (RF-Text: Recv LPN Load) allows receiving multiple ASNs.
Answer: B,D
Explanation:
Receiving
There are two main types of receiving in Oracle WMS Cloud:
* Receive by ASN (RF-Text: Recv {lpn} Shipment)
* Receive by Load (RF-Text: Recv {lpn} Load)
NEW QUESTION 16
Your customer wants to use Advance Shipment Notification (ASN) created in WMS Cloud System for receiving without RF gun and expects ASN to be verified.
What are the two steps to complete the ASN receiving and verification transaction? (Choose two.)
- A. Assign a dock door to IB shipment
- B. Verify the IB shipment
- C. Create a Blind IB plate number and cartonize before receiving
- D. Create a Blind IB plate number and palletize after receiving
- E. Create an ASN from the IB license plate screen
Answer: A,D
NEW QUESTION 17
Which three interface validations cause the Advance Shipment Notifications (ASN) to fail when uploading to WMS Cloud? (Choose three.)
- A. ASN data is past the shipping date.
- B. A Purchase Order that is referenced on the ASN doesn't exist in WMS Cloud.
- C. Purchase Detail line and ASN Detail line do not match in WMS Cloud.
- D. ASN Qty and Purchase Qty do not match in WMS Cloud.
- E. ASN file has invalid data format.
Answer: B,C,E
NEW QUESTION 18
Identify the export type that is not supported in an Express Report.
- A. PDF
- B. CSV
- C. RTF
- D. Excel
- E. PowerPoint
Answer: E
NEW QUESTION 19
Identify two scenarios in which the user can select the "Release Pick Info" option in the Wave Inquiry UI to generate the wave information for MHE systems. (Choose two.)
- A. after wave picking has started, but some allocations have not been picked yet (allocations having packed_qty=0)
- B. after wave picking has started for all allocations (alloc_qty>packed_qty, but packed_qty>0)
- C. if picking has not started for the wave
- D. if all the lines are picked (if allocations packed qty=alloc qty) for all the allocations
- E. packed_qty not evaluated when sending Wave Pick Info
Answer: A,B
NEW QUESTION 20
Select the two routing configurations that are used to specify routes for outbound loads. (Choose two.)
- A. the Routing Mode on the Wave Template
- B. the Routing_Mode parameter on the Loading RF Transaction
- C. the Routing Mode on the Carrier UI Screen
- D. the company parameter PACKING_ROUTING_MODE
Answer: A,D
NEW QUESTION 21
A Purchase order created in ERP is downloaded to WMS Cloud.
Which two statements are correct related to the Purchase order update? (Choose two.)
- A. Purchase order can be re-created by sending the RE-CREATE action code when the status is In- Receiving.
- B. UPDATE is sent both in the Header and Detail for an existing line. The application will just update the record at Details.
- C. The RE-CREATE action code if sent for an existing PO, the same PO will be deleted and re-created with the new details.
- D. The Purchase order header can be updated by sending an UPDATE action code when the status is in Created and Received.
- E. UPDATE is sent in the Header and CREATE in the Detail for an existing Purchase Order line. The application will add up the corresponding "Order Quantity".
Answer: B,D
NEW QUESTION 22
Your customer wants to use Advance Shipment Notification (ASN) created in WMS Cloud System for receiving without RF gun and expects ASN to be verified.
What are the two steps to complete the ASN receiving and verification transaction? (Choose two.)
- A. Create a Blind IB plate number and cartonize before receiving
- B. Verify the IB shipment
- C. Create a Blind IB plate number and palletize after receiving
- D. Assign a dock door to IB shipment
- E. Create an ASN from the IB license plate screen
Answer: B,C
NEW QUESTION 23
You are using the WMS Cloud at the Stores as well as the DC. Your workflow at that Store requires that you quickly pick orders for the customer when they arrive.
Which configuration allows you to achieve this workflow requirement?
- A. Create an Order Type with the flag "Allocate during Pick" enabled so that you can pick orders at the store without waving.
- B. Create a Flow Through process and configure each customer's address as a "Designation Location"
- C. Set the Order Type to "Pick Without Wave". This allows the RF options to automatically pick up those order and display to pickers.
- D. Change the Order Type to "Rush" and wave it because the customer is waiting.
- E. Create a wave template with Wave Template Type "Store", then wave will allocate orders in a FiFO
Answer: A
Explanation:
sequence.
NEW QUESTION 24
You are performing the Split IB LPNs RF transaction and seeing an error message: Shipment Verification status mismatch.
Which three are valid? (Choose three.)
- A. The from-IBLPN and the to-IBLPN might be received against two different ASNs respectively.
- B. This error message will disappear if the RF screen parameter split-uom is left bank.
- C. The from-IBLPN and the to-IBLPN might be received against the same ASN.
- D. If the to-IBLPN is received via the Recv Shipment RF transaction, the from-IBLPN might be from the Create RF transaction.
- E. This error message will disappear if the RF screen parameter required-validations is set up as No Validation.
Answer: B,C,E
NEW QUESTION 25
Your warehouse is divided into two large areas, Area A and Area B, which store different products. You have set up your wave to allocate inventory from only Area A, but when the wave is run, both Area A and area B have allocated items.
What caused the issue?
- A. Allocation zone was not specified in the shipping order.
- B. The locations in Area A have excessive cycle count tasks against them.
- C. In the Allocation Mode, "Restrict Allocation Zone" was not specified.
- D. Allocation zone was not specified in the task selection criteria.
- E. In the Allocation Mode, "Restrict Allocation Zone" was set to Area B.
Answer: D
NEW QUESTION 26
A client can integrate with WMS Cloud by using the input interface.
Which three options can be integrated? (Choose three.)
- A. Orders
- B. Loads
- C. Item
- D. Appointments
Answer: A,B,C
NEW QUESTION 27
You are the inventory control superuser of a warehouse and need to audit all the cycle count activities done by the operators before they are communicated to the host system from WMS Cloud.
You are responsible for the cycle count functionality configuration of the warehouse as well. This warehouse was newly bought by your company.
Your company is a 3PL and this new warehouse will be used for a new client of your company. Which four tasks do you need to complete? (Choose four.)
- A. Create a Cycle Count RF screen with the parameter auto-approve-mode set to off.
- B. Create a Cycle Count RF screen with the parameter auto-approve-mode set to on.
- C. Set the facility parameter INVN_ADJ_APPROVAL_REQUIRED to yes for the new warehouse.
- D. Set the company parameter INVN_ADJ_APPROVAL_REQUIRED to yes for your company.
- E. Audit the Pending records in the Cycle Count Adjustment screen.
- F. Set the company parameter INVN_ADJ_APPROVAL_REQUIRED to yes for the company that you are configuring.
Answer: B,C,D,E
NEW QUESTION 28
Your client finds it easier to read reports without repeated values. The client shared an example report to demonstrate the way they want their columns to be displayed.
What action should you take to make your report look like the example report provided by client?
Report A:
- A. Select the Hide Repeated Values icon.
- B. Select the Hid Common Values icon.
- C. Select Chart Wizard, and delete repeated values.
- D. Select the Suppress Duplicate Values icon.
Answer: D
NEW QUESTION 29
Why is it necessary to have a consolidation location?
- A. Packing using a Distribution transaction requires a consolidation location for each store.
- B. It is necessary if you want to consolidate while packing.
- C. Consolidation locations are used to consolidate orders for a wave.
- D. After you are finished picking your pick cart, you use a consolidation location to pack.
Answer: D
NEW QUESTION 30
You are creating a standard report for a client to display LPN Numbers (for multi-SKU LPNs) and their associated items. The two data fields you have in your report are LPN Number and Item Code.
Identify what controls need to be set to create a sub-total for the number of items for each LPN.
- A. Set the Summary Function for LPN to "Count" and check the Summarize By box for Item.
- B. Set the Summary Function for LPN to "Total" and check the Group By box for item.
- C. Set the Summary Function for item to "Count" and check the Summarize By box for LPN.
- D. Set the Summary Function for item to "Total" and check the Group By box for LPN.
Answer: C
NEW QUESTION 31
Select two configurations required to fulfill a Cross Dock order. (Choose two.)
- A. The Replenishment template is required to replenish Cross Dock Order
- B. The Cross Dock Outbound Order type should be defined
- C. Wave template should be configured to allocate Cross Dock Order
- D. IB Shipment Type should be defined for Cross Dock ASN
- E. Module Parameter should be enabled on the RF Receive Screen for receiving Cross Dock ASN
Answer: B,E
NEW QUESTION 32
In WMS Cloud, which two statements are true about WMS BI Cloud? (Choose two.)
- A. Tables in WMS BI Cloud are referred to as categories
- B. WMS BI Cloud allows users to create reports by creating SQL queries
- C. WMS BI Cloud is available for use out of the box
- D. By default, the WMS BI Cloud functionality is disabled
Answer: A,D
NEW QUESTION 33
A client can integrate with WMS Cloud by using the input interface.
Which three options can be integrated? (Choose three.)
- A. Orders
- B. Loads
- C. Appointments
- D. Item
Answer: A,C,D
NEW QUESTION 34
......
Pass Oracle 1z0-1045-22 Premium Files Test Engine pdf - Free Dumps Collection: https://www.braindumpspass.com/Oracle/1z0-1045-22-practice-exam-dumps.html
