[Apr-2026] Fortinet Certified Professional Security Operations FCP_FSM_AN-7.2 Exam Practice Test Questions Dumps Bundle!
2026 Updated FCP_FSM_AN-7.2 PDF for the FCP_FSM_AN-7.2 Tests Free Updated Today!
NEW QUESTION # 17
What can you use to send data to FortiSIEM for user and entity behavior analytics (UEBA)?
- A. SSH
- B. FortiSIEM worker
- C. FortiSIEM agent
- D. SNMP
Answer: C
Explanation:
The FortiSIEM agent can be used to send detailed endpoint data such as user activity and process behavior to FortiSIEM, which is essential for performing User and Entity Behavior Analytics (UEBA).
NEW QUESTION # 18
What can you use to send data to FortiSIEM for user and entity behavior analytics (UEBA)?
- A. SSH
- B. FortiSIEM worker
- C. FortiSIEM agent
- D. SNMP
Answer: C
Explanation:
The FortiSIEM agent can be used to send detailed endpoint data such as user activity and process behavior to FortiSIEM, which is essential for performing User and Entity Behavior Analytics (UEBA).
NEW QUESTION # 19
Which two settings must you configure to allow FortiSIEM to apply tags to devices in FortiClient EMS? (Choose two.)
- A. FortiEMS API credentials defined on FortiSIEM
- B. Remediation script configured
- C. FortiSIEM API credentials defined on FortiEMS\
- D. ZTNA tags defined on FortiSIEM
Answer: A,C
Explanation:
To allow FortiSIEM to apply tags to devices in FortiClient EMS, FortiEMS API credentials must be defined on FortiSIEM to enable communication with EMS, and FortiSIEM API credentials must be defined on FortiEMS to allow EMS to accept tagging instructions from FortiSIEM. This bidirectional API trust is essential for tag application.
NEW QUESTION # 20
Refer to the exhibit.
An analyst is trying to identify an issue using an expression based on the Expression Builder settings shown in the exhibit; however, the error message shown in the exhibit indicates that the expression is invalid.
What is the correct syntax to create an expression that generates a total count of matched events?
- A. COUNT(Matched Events)
- B. (COUNT) Matched Events
- C. Matched Events (COUNT)
- D. Matched Events COUNT()
Answer: A
Explanation:
The correct syntax is COUNT(Matched Events) - with proper capitalization and spacing - to generate a total count of matched events. The error in the exhibit likely stems from a formatting issue (e.g., lowercase count() or incorrect spacing), not the logical structure of the expression.
NEW QUESTION # 21
Refer to the exhibit.
What will happen when a device being analyzed by the machine learning configuration shown in the exhibit has a consistently high memory utilization?
- A. FortiSIEM will update the model with a higher memory utilization average value.
- B. FortiSIEM will trigger an incident for high memory utilization.
- C. FortiSIEM will lower the CPU utilization trigger requirement for CPU utilization.
- D. FortiSIEM will update the regression tables for memory utilization, and average sent and received bytes.
Answer: A
Explanation:
In the configuration shown, FortiSIEM uses Memory Util, Sent Bytes, and Received Bytes as input features to predict CPU Utilization via a regression model. If a device shows consistently high memory utilization, the model will incorporate that into its training data and update itself with a higher average value for memory utilization, influencing future CPU utilization predictions.
NEW QUESTION # 22
Refer to the exhibit.
Which value would you expect the FortiSIEM parser to use to populate the Application Name field?
- A. wan1
- B. Network.Service
- C. SSL
- D. applist
Answer: C
Explanation:
The Application Name field in FortiSIEM is typically populated using the value of the app field in the raw log. In this event, app="SSL", so "SSL" is the expected application name parsed by FortiSIEM.
NEW QUESTION # 23
Which two attributes can you not select together in the Group By and Display Fields? (Choose two.)
- A. Source IP
- B. Reporting IP
- C. Raw Event Log
- D. Event Reporting Time
- E. Destination IP
Answer: C,E
NEW QUESTION # 24
What must you configure to apply ZTNA tags from FortiSIEM to devices in FortiClient EMS?
- A. API connection from FortiSIEM to FortiClient EMS
- B. Syslog connection to FortiGate firewalls from FortiSIEM
- C. Syslog connection to FortiSIEM from FortiGate firewalls
- D. API connection from FortiClient EMS to FortiSIEM
Answer: A
NEW QUESTION # 25
When using user and entity behavior analytics (UEBA) on FortiSIEM, what must you use to dynamically supply a list of IP addresses to a FortiGate device for blocking purposes?
- A. Watchlists
- B. SCP
- C. Lookup tables
- D. API Connection
Answer: A
NEW QUESTION # 26
Which two settings must you configure to allow FortiSIEM to apply tags to devices in FortiClient EMS? (Choose two.)
- A. FortiEMS API credentials defined on FortiSIEM
- B. Remediation script configured
- C. FortiSIEM API credentials defined on FortiEMS\
- D. ZTNA tags defined on FortiSIEM
Answer: A,C
Explanation:
To allow FortiSIEM to apply tags to devices in FortiClient EMS, FortiEMS API credentials must be defined on FortiSIEM to enable communication with EMS, and FortiSIEM API credentials must be defined on FortiEMS to allow EMS to accept tagging instructions from FortiSIEM. This bidirectional API trust is essential for tag application.
NEW QUESTION # 27
Which items are used to define a subpattern?
- A. Filters, Threshold, Time Window definitions
- B. Filters, Aggregate, Time Window definitions
- C. Filters, Aggregate, Group By definitions
- D. Filters, Group By, Threshold definitions
Answer: C
Explanation:
A subpattern in FortiSIEM is defined using Filters to match specific events, Aggregate conditions to apply statistical thresholds (e.g., COUNT), and Group By attributes to segment data for evaluation. These three components collectively determine how the subpattern functions.
NEW QUESTION # 28
Refer to the exhibit.
Which two conditions will match this rule and subpatterns? (Choose two.)
- A. A user fails twice to log in when connecting through RDP.
- B. A user using RDP over SSL VPN fails to log in to an application five times.
- C. A user connects to the wrong IP address for an RDP session five times.
- D. A user runs a brute force password cracker against an RDP server.
Answer: B,D
Explanation:
The user initiates an RDP session (Subpattern 1) and then fails to log in multiple times (Subpattern 2 with COUNT(Matched Events) >= 3) - both from the same Source IP and User within 300 seconds.
The brute force attempts typically involve a successful RDP connection followed by multiple failed logins, satisfying the sequence and grouping conditions in the rule.
NEW QUESTION # 29
Refer to the exhibit.
Which two lookup types can you reference as the subquery in a nested analytics query? (Choose two.)
- A. CMDB Query
- B. SNMP Query
- C. LDAP Query
- D. Event Query
Answer: B,D
Explanation:
In FortiSIEM nested analytics queries, you can reference both CMDB Queries and Event Queries as subqueries. These allow correlation between CMDB data and event data for advanced detection use cases.
NEW QUESTION # 30
Refer to the exhibit.
The configuration shown in the exhibit is incorrect.
What must you change to allow this configuration to be successfully applied to FortiSIEM?
- A. The Train factor must be 70% or greater.
- B. Only one AVG type field must be selected under Fields to use for Prediction.
- C. The selection in Fields to use for Prediction and Field to Predict must match.
- D. Run Mode must be set to ML.
Answer: D
Explanation:
The Run Mode is set to Local, which is not valid for training machine learning models in FortiSIEM. To apply this configuration correctly, the Run Mode must be set to ML, which enables proper model training and prediction using selected fields.
NEW QUESTION # 31
Refer to the exhibit.
The analyst is troubleshooting the analytics query shown in the exhibit.
Why is this search not producing any results?
- A. The Boolean operator is wrong between the attributes.
- B. The inner and outer nested query attribute types do not match.
- C. The Time Range is set incorrectly.
- D. You cannot reference User and Event Type attributes in the same search.
Answer: B
Explanation:
The issue is that the "User" attribute is incorrectly assigned a Device IP group value, which is a mismatch of attribute types. "User" expects a user name or identity, not a device IP group. This mismatch between the attribute type and the provided value causes the search to return no results.
NEW QUESTION # 32
Which information can FortiSIEM retrieve from FortiClient EMS through an API connection?
- A. Host login credentials
- B. FortiSIEM license
- C. Host software versions
- D. ZTNA tags
Answer: D
Explanation:
FortiSIEM can retrieve ZTNA tags from FortiClient EMS through an API connection, enabling dynamic user and device classification for policy enforcement and incident response.
NEW QUESTION # 33
Refer to the exhibit.
According to the automation policy configuration shown in the exhibit, what happens if an associated rule triggers?
- A. FortiSIEM fails to the integration policy, because no policy is defined.
- B. FortiSIEM sends an email, because that is first on the list.
- C. FortiSIEM performs all selected actions.
- D. FortiSIEM runs the remediation script, because that takes precedence over all other options.
Answer: C
Explanation:
When an associated rule triggers, FortiSIEM performs all selected actions in the automation policy. In this case, it will send an email/SMS/webhook, run the remediation script, invoke the integration policy (even if none is currently defined), and create a case. All checked actions are executed.
NEW QUESTION # 34
Refer to the exhibit.
The configuration shown in the exhibit is incorrect.
What must you change to allow this configuration to be successfully applied to FortiSIEM?
- A. The Train factor must be 70% or greater.
- B. Only one AVG type field must be selected under Fields to use for Prediction.
- C. The selection in Fields to use for Prediction and Field to Predict must match.
- D. Run Mode must be set to ML.
Answer: D
Explanation:
The Run Mode is set to Local, which is not valid for training machine learning models in FortiSIEM. To apply this configuration correctly, the Run Mode must be set to ML, which enables proper model training and prediction using selected fields.
NEW QUESTION # 35
Refer to the exhibit. Which section contains settings that determine which attribute associations are used to trigger an incident?
- A. Aggregate
- B. Group By
- C. Name
- D. Filters
Answer: B
NEW QUESTION # 36
What are the five categories of incidents on FortiSIEM?
- A. Performance, other, devices, high risk, and low risk
- B. Performance, other, availability, security, and change
- C. Devices, users, high risk, other, and low risk
- D. Security, change, high risk, low risk, and other
Answer: B
NEW QUESTION # 37
Refer to the exhibit.
An analyst is trying to generate an incident with a title that includes the Source IP, Destination IP, User, and Destination Host Name. They are unable to add a Destination Host Name as an incident attribute.
What must be changed to allow the analyst to select Destination Host Name as an attribute?
- A. The Destination Host Name must be set as an aggregate item in a subpattern.
- B. The Destination IP Event Attribute must be removed.
- C. The Destination Host Name must be selected as a Triggered Attribute.
- D. The Destination Host Name must be added as an Event type in the FortiSIEM.
Answer: C
Explanation:
For an attribute like Destination Host Name to be used in the incident title, it must first be included in the Triggered Attributes list. Only attributes listed there are available for substitution in the title template (e.g., $destIpAddr, $srcIpAddr).
NEW QUESTION # 38
How can you query the configuration management database (CMDB) in an analytics search?
- A. Click Attribute > Select from CMDB.
- B. On the CMDB tab, select an entry, and then click Create Search.
- C. On the Admin tab, click CMDB Search.
- D. Click Value > Select from CMDB.
Answer: D
Explanation:
In an analytics search, you can query the CMDB by clicking Value > Select from CMDB, which allows you to choose values directly from CMDB entries for the selected attribute, enabling precise filtering based on asset data.
NEW QUESTION # 39
Refer to the exhibit.
How was this incident cleared?
- A. The analyst manually cleared the incident from the incident table.
- B. FortiSIEM cleared the incident automatically after 24 hours.
- C. The endpoint was rebooted and sent an all-clear signal to FortiSIEM.
- D. The incident was cleared automatically by the rule.
Answer: D
Explanation:
The Incident Status shows "Auto Cleared", and the Cleared Reason states: "Rule has not been triggered for 20 minutes." This indicates that the incident was automatically cleared by the rule logic after a defined period of inactivity.
NEW QUESTION # 40
Refer to the exhibit.
How was this incident cleared?
- A. The analyst manually cleared the incident from the incident table.
- B. FortiSIEM cleared the incident automatically after 24 hours.
- C. The endpoint was rebooted and sent an all-clear signal to FortiSIEM.
- D. The incident was cleared automatically by the rule.
Answer: D
Explanation:
The Incident Status shows "Auto Cleared", and the Cleared Reason states: "Rule has not been triggered for 20 minutes." This indicates that the incident was automatically cleared by the rule logic after a defined period of inactivity.
NEW QUESTION # 41
......
Fortinet FCP_FSM_AN-7.2 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
Fully Updated Dumps PDF - Latest FCP_FSM_AN-7.2 Exam Questions and Answers: https://www.braindumpspass.com/Fortinet/FCP_FSM_AN-7.2-practice-exam-dumps.html
100% Free FCP_FSM_AN-7.2 Exam Dumps to Pass Exam Easily: https://drive.google.com/open?id=1nzHYCGUZUxEkx9xV-OoEkDqXa5kmQY9f
